Which brick is best for home in 2020

Brick has been one of the most popular and demanded building materials for many decades. Its scope of use is wide, often in construction, in repair and other types of work. Determining which brick is best for the house is not always easy, because it is divided into different shapes, density, has different mass and other important characteristics. Before buying, you need to understand the basic properties and determine the main purpose of the work. At the moment, 6 types of bricks can be distinguished for different needs, and which brick is better to use will be described in the article with an indication of the parameters, pros and cons.

The main properties of bricks

There are certain properties that will help you choose a high-quality product, as well as determine which brick is best to build a house from, to lay walls. When buying, you need to consider the following indicators:

• Density. The higher the value, the higher the durability and reliability of the product, in addition, the degree of heat retention inside the building depends on the density.
• Strength. An important indicator that shows the degree of load. During the purchase of goods, this value will be the most important if load-bearing walls and other structures are being erected. You can define it by the designation "M" and the numerical indicator.
• Porosity. Depending on the number of pores and voids in the structure of the product, the walls will store heat better.
• Thermal conductivity. It characterizes the ability to keep warm and microclimate inside the building.
• Frost resistant. The value indicates the ability to withstand cycles of temperature fluctuations, freezing and thawing without loss of basic qualities. The indicator is marked with the letter "F" and a specific number to indicate the minimum number of cycles.
• Resistant to fire. The ability of the brick to withstand temperatures depends on the parameter. This value plays an important role when the construction of stoves, fireplaces and similar structures occurs.
• Moisture resistance. The higher the value, the less moisture the product will absorb. Attention should be paid to this if the brick will be used outdoors.

Knowing the main indicators that you need to look at, you can highlight the rating of the best bricks in a different segment. This will help you decide which brick is best to build a house, a stove, cladding a building, etc.

Rating of bricks for construction

When choosing which brick is best for construction, you need to opt for classic brick options. They are used for the construction of various premises, they have simple shapes and a nondescript appearance. This is due to the fact that it is done for walls and partitions inside the house, which will continue to undergo finishing work. The material is characterized by a low cost, optimal strength with different indicators, which is determined based on the number of storeys and the load that will fall on the building.

Full-body Telloire 1 NF

This option is ideal for the construction of simple buildings in the yard.Among them, one can single out economic structures in the form of a workshop, an area for breeding animals, change houses, etc. The cost for 1 brick is about 6 rubles. Such blocks are characterized by slightly smoothed corners and clear edges on the sides. All this simplifies the hand grip and masonry process, as well as increases adhesion with other materials.

Pros:

• Affordable price for 1 piece.
• Optimum flatness of surfaces at the top and bottom, which helps to lay out the row correctly.
• The minimum degree of moisture absorption is up to 14%.
• Strength M150 - well suited for non-critical buildings.
• Allows you to keep warm inside due to thermal conductivity of 0.51 W / (m * C).
• There are 250 bricks on 1 pallet.

Minuses:

• Due to the presence of side ribs, they often break off the edges when unloading the goods.
• When working, you will need to correctly and skillfully lay out the solution, since the excess will significantly protrude, this is due to the absence of voids in the block.
• Minimum frost resistance, 35F.
• Large weight of the product, which is 3.5 kg. When working all day during the laying process, the hand gets very tired.

Silicate block KSP-801 М150

Silicate bricks are made from lime and quartz sand, therefore, it turns out, to achieve a white or light gray shade. The material is used for rough masonry or cladding. The product is characterized by an affordable price policy and different size characteristics. When choosing which sand-lime brick is better, you should pay attention to KSP-801 M150.

The described option is considered the best for decorating large buildings, including schools or kindergartens. This is due to the large size, which replaces 1.5 standard size bricks. Thus, the masonry process is accelerated. Moisture absorption is only 6%, so fungus will not appear on the walls, and they themselves are not subject to destruction and freezing. On sale, the product is presented in white blocks with smooth edges.

Pros:

• The optimal cost per unit is around 8.3 rubles.
• Due to the size, the finishing of the building will be fast.
• Good external properties, pleasant white shade and smooth surface.
• Strength M150.
• Moisture absorption is only 6%.
• High performance of sound insulation.
• Optimal frost resistance with F75 index.

Minuses:

• Due to the size of the product, it is inconvenient to work with one palm.
• Higher thermal conductivity than clay models with a value of 0.95.
• The adhesion deteriorates due to the absence of voids in the structure, and the load on the foundation itself increases.

MOSCOW-KASHIRSKY 2.1NF

When choosing which red brick is best, you should pay attention to this ceramic product for quick building construction. It is considered the best of its kind due to its convenient block sizes, which help, with the help of laying one brick, replace the process with a couple of standard ones. There are 19 voids in the structure, which significantly reduce the weight of the product, the load on the foundation and help to collect the solution with its fastening from the inside.

Pros:

• The sides are ribbed for easy grip.
• Affordable cost per unit, which is about 11 rubles, while the block replaces 2 standard bricks.
• Moisture absorption up to 10%, which allows the use of the product for basements and damp rooms.
• Good frost resistance with a value of 100F.
• Effective preservation of heat inside the house due to thermal conductivity of 0.26 W / (m * C).
• 1 pallet contains 180 blocks.

Minuses:

• The weight of one block is 4.8 kg and this increases physical activity.
• The smooth part of the block can easily slip out of your hands.

Rating of facing bricks

Which facing brick is better is a question that interests many people who have built houses, but their facade needs to be decorated and given an attractive appearance. When selecting, you must carefully look at the external characteristics and quality of the front side, but strength and other indicators are already considered secondary.

BRICK BKZ SVETLY 1 NF

This option is good for office buildings, since the brick has a beautiful ivory color, in addition, the cost of one tile starts at 10 rubles, which is quite cheap. On one side there is a ribbed surface, and on 3 it is completely smooth and this is done to improve the adhesion to the supporting structure. There are 19 holes in the structure, which significantly lighten the weight of the brick and allow the mortar to get inside, increasing the strength of the bond.

Pros:

• Optimal work weight of 2.1 kg.
• Strength of the M150 brand, which is ideal for interior decoration.
• Moisture absorption up to 12%.
• There will be 480 blocks on 1 pallet.

Minuses:

• Due to the very smooth surface, there are risks of frequent slipping of the material when laying it.
• Weak resistance to frost with an F50 value, which does not allow it to withstand strong temperature changes and can be peeled over the years.
• Due to the non-standard color, the solution must be carefully selected.

RKZ TERRACOTOVY RUST 1NF

The best option for facing a cottage or private housing, since the surface is made in the form of a "bark beetle", and this allows you to achieve a beautiful appearance without additional procedures. The structure has 30 holes of different sizes to eliminate fragility.

Pros:

• Original appearance.
• It is convenient to work and grip with a palm due to the rough structure.
• The optimal weight is around 2.2 kg.
• Moisture absorption up to 11%.
• Frost resistance F100.
• High strength with M150 value.
• The presence of air chambers that increase operational characteristics.
• There will be 480 bricks on 1 pallet.

Minuses:

• The high cost for 1 brick, which starts from 22 rubles.
• There is no ribbed side to improve adhesion to the main wall.
• It is difficult to choose a solution by color.

Rating of the best clinker bricks

This product is made using special clay that is annealed at 1200 degrees. This helps to achieve a beautiful color, increased strength of the front side. It is used for finishing the facade of living quarters, gazebos, sidewalks, etc. Below is the best cladding brick.

ROBEN VICTORIA RED CHATED

This type is best suited for the northern regions where cold, frost prevails, since the degree of resistance to frost in the material has a value of F300. There are almost no analogues on the market with such indicators. The external characteristics are unusual, the front side has chaotic grooves that help to make the appearance of a hewn stone. There are small holes in the structure, which help to reduce mass, make cavities and still retain thick walls for the strength and integrity of the brick.

Pros:

• It is convenient to masonry because of its structure and size.
• The appearance is quite beautiful, the color is suitable for a regular gray solution.
• Polish brand, proven over the years and makes quality products.
• Water absorption up to 5%.
• Excellent strength of the M500 brand.
• Due to the void in the structure, the solution gets inside and improves the bond.

The main disadvantage is the high cost per unit of goods, which starts from 62 rubles.

LSR NAPLES SNOW CANE 0,7 NF

Good clinker product for cladding restaurants, beauty salons. This is due to its pure white shade and the presence of fine lines on the blocks, which add to the cost and sophistication. There are 16 voids in the structure, reducing the weight of the brick and increasing the strength of the masonry. The walls of the material are thick, so the brick itself is strong and can withstand heavy loads.

Pros:

• Expensive and beautiful appearance.
• Optimum weight of 2.6 kg, making laying easier.
• 1 pallet contains 480 blocks.
• The surface is slightly rough, so the brick does not slip out of your fingers.
• The structure with a void allows the bond to be enhanced.
• Moisture absorption up to 5%.
• Frost resistance is 100F.
• Increased strength of the M300 grade.

Minuses:

• High price from 35 rubles.
• Small size, increasing the cost of purchasing material.
• It is difficult to choose a solution by color.

Rating of the best hand-molded bricks

These products are made using a very old method, namely hand-molded bricks. During production, a quartz sand powder is used. The finished blocks are characterized by increased strength and are considered an excellent insulator for construction. They are allowed to be used for masonry of load-bearing walls, which in the future can not be veneered.

VANDERSANDEN FINESSE NEO MAGNOLIA DF PINK

The best blocks, if the house is made for yourself and your family, since the material is characterized by the best strength, are suitable for the construction of load-bearing walls. At the same time, costs are reduced, because after construction there is no need to carry out facade finishing. The appearance is unusual, it is distinguished by the color transition from light brown to pink, which helps to achieve originality. After laying, the building will look attractive not only from the street side, but also indoors, which is especially important when erecting a fireplace in the middle.

Pros:

• The optimum weight for easier laying is 2.4 kg.
• Optimal thermal conductivity 0.5 W / (m * C).
• The surface is corrugated.
• The structure of the brick is solid due to its solidity.
• Good frost resistance with an F200 value.
• High resistance to loads of the M250 brand.
• 1 pallet holds 600 blocks.

Minuses:

• The overpriced product, which starts at 106 rubles per brick.
• Small dimensions which increase laying time and construction costs.
• There are no voids in the structure, therefore, the bundle of rows deteriorates.

VANDERSANDEN IMPULSE LIVORNO WF BLACK-ANTHRACITE

This type is ideal for wall cladding in museums, exhibition centers or similar buildings. This is due to the excellent appearance, which looks very rich, and the dark color helps to highlight other objects standing nearby. The blocks have a chaotic orientation of the relief.

Pros:

• Beautiful, luxurious design.
• Lightweight, only 1.75 kg.
• Easily tolerates frost.
• A good indicator of thermal conductivity 0.5 W / (m * C).
• Due to its small size, it is convenient to take it with your hands.
• 800 bricks are placed on 1 pallet.

Minuses:

• A very high cost for a brick, which starts at 95 rubles.
• Small dimensions, requiring an increase in the cost of purchasing material and more time for masonry.