Best chisel in 2020

Any person working with wood will sooner or later have to use a chisel. Such a tool is important for many areas, especially when performing delicate work with material. Much depends on the width of the device, as well as its sharpening. The handle carries all the force or impact, so it also needs to be guided before buying. The best chisel in 2020 is presented in an overview rating, where the most popular and demanded options are selected. They are the ones you need to pay attention to before buying.

Chisel selection rules

It is difficult to say unequivocally which chisel is better, since they are of different types and are suitable for certain jobs. Based on this, the choice should be formed from several parameters:

• Appointment. The main point when choosing a tool. In a home set, it is enough to have a flat chisel with a blade size of 14-30 mm, but workers who process wood every day need to buy models of different sizes in the range of 6-32 mm, in some cases, use a rounded blade for curly cutting.
• Cutting element. For long-term preservation of the sharpness of the blade, it is recommended to pay attention to the tool made of high carbon steel or tool steel. During the processing of such raw materials, the required steel hardness is achieved, but the manufacturer may not always make a sharp tip, therefore, after the purchase, the edge has to be brought to the ideal.
• Lever. The requirements will vary depending on the master. For some, strength is important if hammer blows are carried out during woodworking, in which case you need to buy a chisel with a metal heel or an all-steel handle. The second craftsmen need a soft handle that will not slip during work and a two-piece look is suitable for this.
• Supplements. The tool itself is considered vulnerable to mechanical stress, due to which it is necessary to properly store and monitor the blade. If you need several elements at once, then it is better to take sets that are placed in a case. Many companies make special caps on the blade for protection, and certain factories offer a whetstone in the kit.

Having determined all the features of the product, you can proceed to the selection of the best models for wood processing.

Rating of flat chisels

This option is used to directly enter the tree, and is also suitable for planing, cutting work, the formation of small rectangular grooves, grooves. At the time of purchase, the size of the cutting part, its material, as well as the impact resistance of the body are taken into account.

DYNAGRIP Stanley 0-16-878, 20 mm

The best option for people who require thin stripping of the wood layer. This is achieved through the sharp edge of the blade, which is made of high carbon steel, so it is very strong and can withstand heavy loads. With the help of the product, it is easy to work with dense species such as oak, ash or beech. During operation, the chisel does not bend, it has optimal rigidity.

Pros:

• The cutting edge is 20 mm wide, which is the optimal parameter for removing a wide layer of wood, as well as for shape cutting.
• There is a steel heel at the end of the handle for hammering.
• Specially shaped handle for a firm grip.
• The working part is 141 mm long.
• The weight is 250 grams, so the hand will not get tired during long work.
• A very sharp blade, and if dullness occurs, the sharpness is easy to correct.
• Long handle suitable for large hands.

Minuses:

• Cost from 550 rubles.
• The overall dimensions are quite large and inconvenient to transport.

Hart HCC32 32 mm

The main advantage of the product, according to experts, is the strength and durability of the product. All-metal forged steel tools. Using selective heat treatment, the manufacturer made the blade as hard as possible with a soft handle. This makes it possible to cut, plan and gouge wood. The model is considered universal, characterized by a sharp blade, but weighs 610 grams.

Pros:

• Wide blade 32 mm.
• All-metal type.
• Versatility.
• The sharpness of the blade.

Minuses:

• High price.
• Large mass.

MATRIX Tiger's eye 24503, 8 mm

The best option when you need to cut deep grooves and grooves in the tree, due to the presence of a nickle and a through rod. A design of this kind makes it possible to strike with any hammer. The cutting width is 8 mm, which is good for curly cutting or the need for deep and fine relief. The handle is beautiful, modern with a rubber surround.

pros:

• The optimal price is from 240 rubles.
• Rubber coated handle to prevent slipping in the hand.
• Application of 65 Mn alloy steel for the rod.
• Anatomical handle.
• Light weight, only 240 grams.
• Long operational period.

Minuses:

The main disadvantage is that the chisel will only fit grooves and grooves, the planing itself will be lengthy, due to its small width.

Semicircular chisel rating

These are the best chisels for carving wood, creating patterns, rounded holes, and smooth grooves. The selection takes into account weight, handle type and cutting width.

FIT 43143, 12 mm

The best semicircular model among the easiest to create patterns, grooves. This tool is perfect for those new to woodworking as well as professionals. The price of a chisel is from 215 rubles, a blade is 12 mm wide, which is optimal for different types of work. The handle is thick, anatomically shaped, so it fits comfortably in the hand, and also rubberized to prevent slipping.

Pros:

• Very lightweight tool, only 130 grams, so even long work runs smoothly without fatigue.
• 12mm width is ideal for different cutouts and trimming.
• The manufacturer uses tool steel, which retains sharpness for a long time.
• The length is 25 cm, so it is suitable for recesses.
• Affordable pricing policy.
• Excellent cuts.
• Recommended for chamfering gas silicate sides.
• There is a hole on the handle that allows you to hang the tool.

Minuses:

• You can't hit with a hammer.
• It is sold not sharpened.

NAREX Super 2009 Line Profi, 14 mm

One of the best semicircular models that is considered professional. The product is used by many specialists and is partly caused by the chrome-manganese steel rod, which helps to maintain sharpness even with the daily processing of wood. The blade width is 14 mm, which allows making cutouts, grooves and holes. The handle includes a metal heel for hammer or mallet strikes. It itself is coated with a rubber substance for a secure grip.

Pros:

• Rubber grips for better grip and hold in the hand.
• The presence of a hole through which the tool can be suspended.
• There is a metal heel for hammering.
• High-quality metal annealing.
• The tip is 124 mm long, which makes it possible to work in recesses.
• Lightweight and comfortable for work, only 176 mm.
• The total length of the chisel is 25 cm, which is convenient for transportation and work in a small space.

Minuses:

• High price starting from 1000 rubles.
• Not suitable for very delicate work.

Rating of sets with chisels

Ready-made sets of chisels make it possible to buy tools of different widths and shapes for performing different tasks at an optimal price, and storage is provided with a case or case. During the acquisition, you need to look at the number of devices, width, blades.

Stanley DYNAGRIP 2-16-888

An excellent set for a carpenter who has to frequently move to different objects. The set is sold in a plastic case with 5 chisels of different sizes, all of which are placed in a separate place. The cutting element is protected by rubber. The tool itself is flat, with the same two-component handles.

Pros:

• A large set with a width ranging from 6-25 mm to suit almost any task.
• The weight of the set is 1.3 kg, which is convenient for carrying.
• Small product dimensions 30x30x5 cm.
• The suitcase has a handle and latches for easy transport and increased comfort. The tool will not fall out while carrying.
• The handles have steel heels for hammering.
• Grip with soft grip and finger-shape.
• The steel is alloyed and will work for many years.

Minuses:

• The high cost of the kit is around 2000 rubles.
• There is no width of 8 and 12 mm, which are often used for shaped cutting.
• Weak sharpening from the manufacturer, therefore, before use and after purchase, fine-tuning is necessary.
• Some elements may have broken geometry, so it is suitable only for rough manipulations.

NAREX SUPER 2009 LINE PROFI 8, 10, 16, 32 mm

Czech set made of chrome-manganese steel and straight blades. Special attention should be paid to the rubber coated handles and impact heel. The quality of the tool is excellent, the set includes the most popular chisel sizes. Consumers also like the sharpness and long life of the products. Among the disadvantages are broken geometry and the absence of a case.

pros:

• Application of chrome vanadium steel.
• High quality sharpening.
• The optimal ratio of cost and quality.
• Comfortable handles.

Minuses:

• Lack of case.
• Broken cutting edge.

Enkor 10401 1/6/36

The best choice for beginners in woodworking due to the optimal price and 4 chisels of different widths, namely 10, 12, 16 and 20 mm. The working rod is made of alloy steel for a long service life. The blade is additionally hardenable.

Pros:

• Affordable cost starting from 400 rubles.
• Thick handle for a snug fit.
• Low weight of the tool.
• Includes 4 chisels.
• The blades have a rubber cap.

Minuses:

• Ugly design.
• No case.
• It is recommended to use only for soft wood species, in case of contact with a knot, rapid blunting is possible.
• For fine work, there are no 6 and 8 mm blades.

Having studied all the best wood chisels, you can make the right choice for your needs. The entire article is written for informational purposes only and does not force the purchase of a particular product.