Best Car Holders in 2020

With the advent of navigators in new smartphones, it became necessary to keep them in sight, even while driving a vehicle. For these purposes, you need a simple device - a smartphone holder. The attachment is simple to install, but the touchmonitor can break if dropped. Therefore, such a small product needs to be selected very carefully. Before purchasing, you should familiarize yourself with the characteristics of users of various holders. In order to select the best car holders in 2020, this ranking was compiled.

Criterias of choice

Today the telephone is an indispensable attribute for a modern person. Thanks to him, it is possible to communicate, send photos, video and audio files, and plot the route of movement. To prevent the driver from shifting his attention while driving, it is advisable to install the phone on the holder. In view of such a simple and budgetary device, the phone will turn into a compact multimedia system with great functionality. It is possible to save on the purchase of a navigator or registrar. To choose the best car phone holder, you need to pay attention to the following parameters:

• Structural strength. By saving money on the holder, it is possible to lose an expensive phone, which can fall from the stand during significant shaking.
• The fixture must fit into the interior of the car dealership. The same applies to color as well as dimensions. Intricate designs are unlikely to look organic in a small car.
• Ease of installation. Since the fixture is often installed and removed from the holder, ease of installation will be one of the key factors during selection. It is required to purchase products where it is possible to do everything with one hand movement. It is optimal to buy a magnetic stand.
• Various car models have their own points at which it is possible to install the device without difficulty. They can be a windshield or side glass, a rear-view mirror, a front panel or air vents. Starting from the optimal position, you need to choose a device with a fixation in the form of a suction cup or a clip for the deflector.

The best holders with fixation to the deflector

Devices of this type are attached to the air duct inside the car dealership using special clothespins, clips or spring-loaded legs. At the same time, the smartphone will become available for the driver and passengers and will not block the view.

Kenu airframe

The main advantage of the considered car holder is considered to be reliable fixation of smartphones with a 6-inch diagonal. The device is mounted to the airflow deflector, the phone is held at arm's length. The phone is fastened to the air duct thanks to a simple spring clip.

The product rotates 90 degrees. The model has an original style and compact dimensions, it can be used as a phone stand on a table. Leather trim adds elegance to the holder.The car holder is suitable for many brands of cars, it can be customized to fit phones with other parameters.

Consumers note a number of positive aspects of the device in question. These include fixing large phones, simple assembly and sleek looks. The disadvantages include the movement of the car holder when cornering.

Pros:

• high-quality assembly;
• virtually invisible inside the cabin;
• right angle of inclination;
• full rotation option;
• suitable for all grille modifications;
• sturdy smartphone clamps.

Minuses:

• no limiter at the bottom;
• the strict style will be too simple for some.

Onetto One Touch Vent Mount Easy

The product in question is from the South Korean manufacturer Onetto. Duct mounting is quite simple, the phone rotates 360 degrees. The developer provides the option of installing devices of various sizes. The width varies in the range of 5.5-8.9 cm. The feet of the automatic holder have a rubberized surface, which will make it possible to eliminate vibration or mechanical action. The wall at the back has a large area, which protects the phone from hot air currents. Although the device has minimal functionality, it has a brutal and stylish look.

Users appreciated the versatility, brevity, insulation from hot air currents. Any phones will be held securely in rubber paws.

Pros:

• option to rotate the holder with a smartphone 360 ​​degrees;
• auxiliary stop at the bottom;
• the rubber mount will not scratch the air duct grill, but it is installed extremely firmly;
• the spring-loaded legs close - you just need to fix the smartphone with the trigger.

Minuses:

• slight tilt - only 15 degrees;
• during shaking, the rigidly mounted telephone functions as a lever and sometimes breaks the grill;
• the spring mechanism is not durable and its grip weakens over time.

Nite Ize Steelie

The best car holder for your smartphone. The device, which is attached to the air grille using universal clips, has a head with a powerful neodymium magnet. It firmly holds the device weighing up to 0.3 kg even during extreme driving, and the smartphone is mounted on it with a single touch.

You need to get used to the cover on the gadget body (or on the case). It is quite massive, which creates discomfort during normal use of the device.

Pros:

• high quality build;
• the smartphone will not move out during shaking;
• external magnetic strips (no need to mount under the cover);
• the option of mounting any other items to the device;
• hinges make it possible to turn the phone in different directions;
• The adhesive tape for mounting the overlays will not leave a mark.

Minuses:

• there are a large number of budget and low-quality fakes on the market;
• overpriced.

Belkin car vent mount

The device in question is a laconic holder with 2 movable legs. It will effortlessly rotate 360 ​​degrees, the grippers can move apart in width 5.5-8.3 cm. The device is extremely simple, but strong and reliable - it will not break or spoil the deflector grill.

Pros:

• rotation of the phone 360 ​​degrees;
• captures various smartphone models - including up to the iPhone 7Plus;
• there is a holder for charging;
• small size;
• soft rubber crimps for attaching to the grille.

Minuses:

• no bottom retainer;
• overpriced.

Best Car Suction Cup Phone Holders

Here the driver will independently decide where to install the product, so that the phone is comfortable to use and the holder does not obstruct the view. Mostly such a device is fixed to the glass or to the torpedo. However, it should be borne in mind that in such assemblies, the sucker itself is considered to be the weak link, therefore only the highest quality holders are present in the list.

Onetto Mount Easy One Touch 2

This device occupies leading places in the rating due to its high quality and wide functionality. The product is equipped with a comfortable telescopic extension. It makes it possible to bring the phone closer to 60 mm. This feature will be particularly useful for vehicles with a distant windshield or deep panel.

The developer provides the option of attaching to various surfaces. For smooth glass there is 1 blocking stage, and for embossed torpedo there is a second. There is a sliding mechanism at the holder, which will make it possible to fix smartphones 5.5-8.9 cm wide.

Car drivers are generally satisfied with the performance of the Onetto device. The following advantages of the device are often distinguished: a strong gel suction cup, a wide range of smartphones used. The disadvantages include a rigid barbell and a certain massiveness.

Pros:

• the telescope makes it possible to bring the smartphone closer without removing it when the dashboard is too deep;
• durable suction cup adheres firmly to surfaces with different textures;
• will show itself perfectly when shaking on the ground or paving stones;
• in the open position, the extension can rotate 180 degrees, the head of the device - 360;
• shutter button on the bed;
• the position of the leg is fixed;
• adjustable lower smartphone support.

Minuses:

• quite massive assembly, but this is a fee for a telescopic rod;
• the smartphone can be removed only by means of a special detach button;
• overcharge.

Ppyple Dash-N5

A compact device for phones with a diagonal range of 3.5-5.5 inches. The developer recommended fixing it on the dashboard by means of a nano-suction cup (a super-adhesive jelly-like surface is assumed that will not stick to hands, and also perfectly adheres to a textured and vertical coating). It is also possible to fix it on the glass. The release is carried out in white and black colors with a matte and glossy finish.

Pros:

• tilts, turns occur without squeak and click;
• the suction cup will not leave marks on the coating and will not react to changes in temperature conditions;
• the smartphone can be easily removed from the holder;
• the soft pad effectively dampens vibrations;
• the suction cup is washed off with ordinary water if necessary;
• the holder can be rotated, lifted and rotated 360 degrees due to the paired hinge mechanisms;
• bright style;
• affordable cost.

Minuses:

• glossy items will collect dust.

Best Car Holders with CD Slot Installation

When the CD-player in the radio is practically not used, it can be adapted in order to mount the holder under the phone. Thus, the monitor will always be visible and will not create obstacles.

Ppyple CD-N5

The mounting part of this device has a special impeller, blades that diverge in the CD slot and become a surprise there. The package contains 3 rubber pads of various thicknesses, which allow you to select the required dimensions in order to fit the device tightly into the slot.

Pros:

• bright style;
• the paws of the device are made of rubber and will not scratch the smartphone;
• easy installation / removal of the phone;
• pretty budget price;
• the holder can be rotated on the sides and around the axis;
• firmly clings to the CD slot, there are no backlashes and does not jump out on bumps.

Minuses:

• tight attachment lever;
• after a long period of use, the clamps loosen.

iOttie iTap Car Mount Magnetic

Magnetic holder for CD slot, which is compact and convenient. The assembly is quite simple, and the movable head makes it possible to tilt the smartphone to the sides or rotate it 360 degrees.

Pros:

• neodymium magnet that holds the smartphone even when shaken;
• Easily install and secure with the spacer in the CD slot;
• can be removed without effort;
• laconic and bright style;
• there is no vibration when driving.

Minuses:

• the need to attach the counter plate to the phone case;
• quite overpriced.

Onetto CD Slot Mount Easy Magnetic

A neat device for mounting in a CD slot. It has a magnetic head that can hold various devices weighing up to 0.25 kg. There are no paws and clamps, and therefore, various restrictions on the dimensions of the phone.

Under the cover, you need to install a disc made of metal that sticks to the magnet. At the same time, the panel thickness at the back does not exceed 2 mm. A screw is installed at the bottom of the device - it needs to be tightened.

Pros:

• does not interfere with playing the disc in the radio;
• the rubber retainer will not scratch the slot;
• the hinged holder enables the smartphone to make full revolutions.

Minuses:

• in a number of radio tape recorders, the phone blocks access to the upper keys;
• magnetic fixation over time may interfere with camera and navigation.

Often the question arises, which is the best car holder for a smartphone to buy. To buy quality devices, you need to familiarize yourself with this rating. The list includes the best products. They are distinguished by efficiency and quality.