To paint a car properly, you need a compressor to spray the dye properly. With periodic use, it will be sufficient to purchase a budget piston product with average parameters. When the compressor is designed to operate in production virtually all day long, you need a powerful semi-professional or industrial device.
Of course, any purchase, including a budget one, must be justified by high-quality functioning and appropriate service life. In this regard, a rating was compiled, which included the best compressors in 2020.
Content
main parameters
The question often arises which compressor is better to buy. Some of the following characteristics can be found in the passport of the device, the rest during operation:
- Performance. In such a situation, the key role is played not only by the inflation speed of the car wheels. During pumping of a fully deflated one, it is possible to face the fact that an insufficiently efficient device is not able to compensate for air leakage.
- Connection type. In a productive device, engine power plays a key role. In this regard, energy consumption increases, so you should be skeptical about products that are plugged into the cigarette lighter socket or the indicated power on the packages does not correspond to reality (often you need to constantly change blown fuses). Connecting the car device with crocodiles directly to the battery is the best solution, but only when the car has open access to the terminals.
- The length of the cable. Often the disadvantage of the products under consideration is the fact that the length of the cord will not be enough to reach the rear of the car. In addition to the length of the cable, an assessment of its rigidity should be given - with strong stretching, the hard wire pulls the plug out of place. In this regard, it is advisable to look for products with an ordinary cord.
- Pressure gauge characteristics. It is difficult to assess the accuracy of the readings without a high-quality pressure gauge; therefore, one should, first of all, focus on the pressure gauge scale. On small devices, the arrow quietly overlaps the divisions. You should not strive to acquire devices with double digitization: the need to set pressure in pounds per square meter. inch is missing, and therefore the additional ruler is in the way.
- Duration of continuous operation. This indicator is assessed in conjunction with power. For example, when an SUV or crossover has high-profile tires, the poor performance of the device will swing the wheels for a long time and create overheating.
The best household compressors
The so-called domestic compressors are intended for short-term small work. Pneumatic equipment with impressive air flow characteristics, for example, spray guns with HVLP technology, are not connected to these.Painting a car for such a device is a feasible task, but it lasts several times longer. This is due to the fact that the duration of continuous operation is generally no more than 10-15 minutes, otherwise rapid overheating occurs and, if there is no thermostat, breakdown. Based on this, we can conclude that even a high-quality household device must be used carefully.
FUBAG AIR MASTER KIT
The device from the manufacturer from Germany is confidently included in the rating of the best compressors. It is a set of the most popular pneumatic tools that are required for auto maintenance and home repairs. On the official website on the Internet there are 2 variations of the kits: 6 and 10 units. The smallest set includes:
- 3 pneumatic pistols with nozzles - for inflating tires, blowing or washing;
- 3 tips for inflating balls, bicycle wheels and mattresses;
- flexible five-meter hose;
- spray gun with a tank in the amount of 500 g.
Regarding the device itself, it should be noted that with a rather small size, it differs in power. Made of high-quality material, ergonomics are carefully thought out: manometers are easy to read, have accurate readings, craters are located comfortably. The disadvantage is the small length of the power cable and a strange instruction, which includes information about several products at once, however, given the cost and rich set of equipment, the disadvantages are insignificant.
Pros:
- sufficient power;
- high-quality assembly;
- a wide range of works;
- simple interface;
- adequate price.
Minuses:
- short cable;
- strange instruction.
DENZEL РС 1 / 6-180
The device in question weighs approximately 11 kg and belongs to the most budgetary, compact and economical. Its characteristic feature will be the absence of lubrication in the cylinder-piston group. To reduce friction, special anti-friction materials are used during construction. As a result of this solution, the oil does not penetrate into the air, does not mix with the dye, therefore the device is extremely convenient for use for painting various surfaces. The output power is 180 l / min, for this purpose you need an HP or LVPL spray gun.
During operation, the device creates the maximum pressure of 8 bar, this parameter can be adjusted, which will make it possible to use it with a full set of pneumatic tools. It is imperative that it looks presentable and operates without noise. The device cannot be called a universal device, since a complete painting of a car takes a long time. The direct drive provided by the device (connecting the engine shaft to the crankshaft of the air blower), although considered the simplest, does not have an effective heat removal, therefore the device is stopped after 10 minutes.
Pros:
- budget and small-sized;
- silent;
- nice view.
Minuses:
- long-term painting;
- there is no heat dissipation in the drive.
WESTER W 006-075 OLC
The performance and displacement of this one are rather small. However, expectations are fully justified, and the indicated 8 bars will be stable. Buyers often use it for domestic purposes - local painting and inflation of tires, blowing out tools, etc. Due to its compact dimensions, the device can easily be placed in small workshops.
The developer did not regret and provided all the necessary safety elements in the budget device: 2 pressure gauges, an oil indicator, a safety valve. There is no claim to ergonomics, to the assembly itself: the device is perfectly painted, the gaps are uniform, and has been functioning without breaks for years. The components are made of cast metal, rubber feet reduce vibration, and there is a comfortable handle for transportation.
Pros:
- excellent technical parameters for painting parts;
- high-quality assembly;
- long-term operation;
- silent operation;
- there is a handle for transportation.
Minuses:
- not installed.
The best semi-professional compressors
Such devices in many situations are presented by developers from Europe and the CIS, they are distinguished by certain characteristics. Provides a capacity of over 270 liters per minute and a pressure of 8-12 bar. To maintain optimal performance, the volume of the receiver will increase to approximately 50–100 liters. The continuous operation of such devices does not last more than 40 minutes, but this is enough to use them for service stations and tire shops, services.
AURORA GALE-50
The best compressor in terms of power. The characteristics indicate an indicator of 412 liters per minute. However, at the output, it can drop to 288, which is the average parameter in this range. A larger number of buyers use the device, since it has the necessary characteristics that make it possible to successfully use it for painting a car in a service station. In addition, the product is noted for its reliability - it was purchased several years ago, throughout this period it functioned without interruptions.
The device is equipped with an air filter in order to protect the units from dust, the seams of the receiver, the casting of the cylinders and the engine are made of extremely high quality. Outwardly, the device looks bright enough - there are no gaps in the elements, no backlashes. The design provides for universal outputs like "rapid" to simultaneously connect 2 consumers. The product in question can not be called light or compact, but there is a handle and 2 wheels, which will greatly facilitate transportation.
Pros:
- functioning without failures;
- possibility of transportation;
- presentable view;
- 2 equipment outputs.
Minuses:
- substantial mass.
ABAC MONTECARLO L25P
At the end of the last century, the compressors of the Italian manufacturer made a splash in the domestic market - unlike Russian devices of the Soviet era, they are quite lightweight, compact and efficient. To date, the situation has changed, but the leading places in the rating, as before, are occupied by products of this company.
The compressor is designed for variable pressure operation, which will fully satisfy a larger number of compressed air needs. The device is equipped with a 50 liter receiver, 1-phase electric motor, 2 pressure gauges, large wheels and a carrying handle.
Manufacturers used the latest technologies in the design of the piston head: for optimal cooling, aluminum alloys were used, the cooling fins were enlarged, the piston was equipped with graphite-Teflon rings, which are characterized by low friction and increased wear resistance. Due to this, the resource of the device has significantly increased, in particular, during a cold start.
Pros:
- thoughtful piston head;
- high blood pressure.
Minuses:
- not installed.
QUATTRO ELEMENTI KM 50-380
For large-scale painting of a car, a compressor with a higher performance is required; this tool can be distinguished among budget variations. Parameters are encrypted in its marking: 50 l is the air collector, 380 l is the input capacity in. The output power is less at approximately 270 l / min - enough to create a good working pressure. At the same time, the performance of the electric motor and energy consumption are not too different from the power of other expensive compressors.
The developer increased the resource of the device by installing cast iron cylinders instead of similar ones made of aluminum. A drain valve is installed on the bottom of the receiver, which allows condensate to be eliminated in the shortest possible time; the receiver itself is coated with a dye to prevent corrosion. The weight of the device is about 40 kg; for its transportation there is a handle and 2 wheels. According to the characteristics of buyers, it turns on infrequently, pumping is fast, and therefore, long-term operation. Among the shortcomings, it should be noted the inconvenient oil change and the small length of the power cord.
Pros:
- optimal ratio of power and energy consumption;
- 2-cylinder group;
- adequate cost;
- silent work.
Minuses:
- high starting current;
- short wire.
The best devices for professional use
When painting cars professionally, you should forget about budget direct drive products. For such purposes, you will need powerful belt-driven devices that do not overheat. They are equipped with similar electric motors, however, due to the difference in the diameter of the pulleys, the crankshaft will rotate more slowly. In this regard, the air delivery part will not overheat, and the compressor part will have time to properly lubricate. This will make it possible to use compressors of this category in a more efficient mode, however, it should be borne in mind that continuous use, as before, is unacceptable.
ABAC 6000/270 CT 7.5
This compressor stands out in the line of professional products. It is special in that it has an acceptable price-performance ratio. The device of the piston block includes 2 cylinders of different diameters, which provide two-stage air compression. Such a solution, in comparison with 1-stage products, will give certain advantages: economical consumption of electrical energy, increased power and effective heat dissipation, which increases the period of operation.
The compressor is suitable for professional car painting, crushing, nut tightening and other semi-industrial applications. The reliability and durability of the device is combined with increased comfort - an oil indicator is provided, for quick and accurate regulation of the outlet pressure, a regulator with a pressure gauge is installed. In addition, transportation is well thought out, which implies the presence of 2 rear wheels and 1 steering wheel. Safe operation is ensured by an auto-unit, which turns off the device when it reaches the maximum pressure and turns it on in the process of lowering it to the minimum.
Pros:
- two-stage block;
- high air flow;
- high pressure;
- reliable and long-term operation;
- comfortable use.
Minuses:
- not identified.
REMEZA SB4 / C-100.LB75
The manufacturer from Belarus has been popular since the end of the 20th century. During this period, it produces compressors and exports to 25 countries. His products are distinguished by a combination of high technical characteristics and reasonable prices. But the compressor has another important difference - it can operate stably at low voltage in the network. Most car services are located on the territory of small enterprises, where productive equipment provokes a voltage drop. The use of ordinary compressors in such a situation is fraught with breakdown.
Due to the design features, the product “blows out” 10 bar with an output capacity of 616 liters per minute, the compressor can easily feed any pneumatic tool (car paint gun, grinder or pneumatic chisel hammer). The high-quality assembly of the device is visible to the naked eye, the color of the receiver is carried out in an optimal way: it does not rust and does not get dirty.
Pros:
- high-performance device;
- significant air supply;
- high-quality assembly;
- simple interface;
- proper cooling.
Minuses:
- immobile;
- it is not always possible to connect to a 3-phase network.
FIAC AB 100-360
In the series of best air compressors, the product in question is the best. The single-stage oil compressor is manufactured directly for intensive use in small production. It has a capacity of 252 liters per minute, is supplemented with a 100 liter receiver and includes 2 cylinders that have been honed, as a result of which the oil can stay on the walls. In addition, a special Fast Valve design is introduced, which provides the lowest operating noise and is more reliable than conventional valves.
The developer from Italy has long been popular in the domestic market and has a wide network of specialized service centers. They interact with foreign engineers, have warehouses with various spare parts and quickly solve various technical problems. This is confirmed by reviews - there are no complaints about the shortage or long-term delivery of spare parts. Basically, the device is characterized as a high-performance, safe and durable device, but in order to extend the service life, the recommended operating mode should be observed.
Pros:
- adequate cost;
- safety of construction;
- proper cooling;
- overheating protection of the electric motor;
- stable operation under any conditions;
- long-term operation.
Minuses:
- significant weight.
Which car compressor should you buy?
The question often arises as to which compressor is better to choose. There is an impressive assortment of various kinds of autocompressors, there is no point in choosing based on cost. You should choose the method of application - a small budget device will be out of place in the trunk of a large car, as well as a high-power compressor in a city passenger car. When in urban conditions the breakdown of a budget product does not become a big problem, then with regular long trips, the reliability of the equipment will come to the fore. To buy the best compressor, you should read the general guidelines.
