Best alloy wheel manufacturers in 2020

A car with conventional stamped wheels looks dull and standard. However, by installing alloy wheels, the appearance will change for the better. To choose high-quality, reliable, stylish discs, you need to go through a large number of options and in such a variety you just get confused.

The choice of alloy wheels is large enough, and in order to know which ones are advisable to buy for your own car, you should research the top rating, which includes the best manufacturers of alloy wheels, their top models that are most prevalent and in high demand.

General information

Choosing the best wheel rims for a car is an infrequent procedure for the average car owner. After purchasing a new machine, the installed initial disks are used for a certain period. However, they will wear out and break, become obsolete, or become unusable over time. The reason for purchasing new discs is also the desire to have a spare kit for winter or summer tires, so as not to carry out constant seasonal installation. Sometimes the reason for purchasing new discs is the desire of the car owner to change the style of his own car. Therefore, replacing discs will become one of the most popular tuning options.

According to the manufacturing technology, the products are divided into several types:

• Stamped,
• cast,
• forged,
• prefabricated.

The most common and available are stamped steel discs. Forged and prefabricated have a high price, therefore they do not have such a demand among motorists. Alloy wheels are considered the best solution in terms of cost, style, and quality from all known varieties. By virtue of their own advantages over stamped products (lower weight and the likelihood of acquiring any design shapes), cast ones are a desirable and stylish solution for any car. In addition to the fact that the car on alloy wheels looks elegant and attractive, it is more comfortable during movement, and the load on the suspension will be less.

Alloy wheels are also common among manufacturers. Therefore, there are a lot of them on the market, and therefore it is rather difficult for an ordinary car enthusiast to choose the best from this series. In view of this, a rating of the best alloy wheels was compiled, which included domestic and foreign manufacturers.

Advantages of famous brands

It is often possible to hear that it is not recommended to purchase products from an unknown brand, that it is advisable to purchase expensive products from a more popular manufacturer. This is due to the fact that by saving during the purchase, you can lose a lot in the process of use. Well-known manufacturers are chosen based on the following factors:

• High quality materials. Additionally, the reliability of the disks and their compliance with international standards and requirements is guaranteed.
• The quality control system, which is implemented in a serious enterprise, reduces the likelihood of getting a marriage.
• There is a risk that the more affordable option behaves well only on a flat surface, and during shaking, performance is lost.
• Each serious manufacturing company has its own exclusive manufacturing recipes that increase the performance properties of products.
• On expensive models, the coating is more reliable. There is no reason to worry about corrosion.
• Reputation is something that is difficult to earn, but easy to lose. Every developer knows this. Large manufacturers have been working for many years and are trying to do everything not to lose their leading positions in the market.

The best European manufacturers

Products of European manufacturers are distinguished by a variety of styles and high reliability. The use of the latest technologies in the manufacture of melt and high-quality casting technology will enable the manufacturers listed in this section to feel confident in the market.

OZ RACING

The manufacturer in question produces products of high quality, elegant style, unusual design, using the latest technologies. Thanks to the variety of products on offer, the Italian manufacturer OZ Racing remains at the top of the alloy wheel market. Its products are appreciated not only by ordinary motorists around the world, but also by Formula 1 racers, various rallies and other sports competitions.

Pros:

• high quality materials;
• small weight;
• bright style;
• well bypass pits and other irregularities in the coating;
• the minimum amount of damage;
• reliability.

Minuses:

• overpriced.

ALUTEC

They are the most common and respected manufacturer of fusible discs. The German developer has been supplying the products under consideration to the market for more than 20 years and during this period they managed to fine-tune the high-tech and modern production of wheel disks that meet virtually all the wishes of motorists.

Due to the true German quality, the manufacturer Alutec conquers markets in most of Asia and Europe. To make discs, metal is used, which has high-strength characteristics, and for paintwork, high-quality materials from world famous developers are used. As a result, wear-resistant products with proper geometry, balancing, and damage resistance will appear on the market.

Pros:

• unusual style for every taste;
• proper value for money;
• optimal balancing;
• high strength characteristics;
• reliable fasteners;
• comfort in use.

Minuses:

• overpriced.

DOTZ

Sufficiently high-quality products from a manufacturing company from Germany, which presents its own products in a large assortment at an acceptable cost. From the very beginning, the brand was engaged in the production of discs for wheels, as a result of which over the years it managed to achieve corresponding success in this area.

Dotz products are manufactured using the latest technologies and high quality materials. At the same time, each stage of production undergoes strict control and the consumer can choose alloy wheels that meet all the required international standards.

Pros:

• pleasant, unusual, sophisticated style;
• high strength characteristics;
• a significant range of standard sizes;
• suitable for driving sports cars;
• optimal ratio of cost and quality.

Minuses:

• low cost.

AEZ

Modern technologies for casting provide an opportunity for this manufacturer to produce products that do not require balancing. This unusual property guarantees high demand for Aez alloy wheels in the domestic market. The developer provides multilevel control at every stage of product creation (from melt preparation to paint and varnish coating).

Despite the significant range for classic cars, the crossover and SUV product line is also characterized by high performance. Among them, it should be emphasized in particular the increased resistance to deformation and resistance to aggressive environments where the car is operated.

Pros:

• there are very light discs marked “lite tec®”;
• antistatic coating that repels water and dirt;
• casting technology that ensures uniformity of the metal structure without pores;
• reliable products;
• a wide range of models and standard sizes.

Minuses:

• cost.

DEZENT

The style of such wheels is distinguished by the simplicity of standard shapes and conservatism in the choice of paints and varnishes. The considered light alloys of this developer have a "German" quality of products. Products offered on the domestic market are made in a size with a radius of 16 inches and more. This makes it possible to operate them in passenger cars and crossovers.

The synthesis of sophistication and increased safety of wheel rims from the developer in question ensures a high demand for the brand in most countries where the manufacturer's models are distinguished. DEZENT has a high rating on the domestic market and occupies its own niche, which is designed for wealthy car enthusiasts. This type of user is not advertising-oriented and, in the selection process, first of all takes into account the confirmed product quality. DEZENT alloy wheels belong directly to this category.

Pros:

• adequate cost;
• operation in the winter;
• do not actually need balancing;
• safety;
• long-term operation.

Minuses:

• not installed.

Best Asian manufacturers

Light alloys of Asian manufacturers are distinguished by a large assortment of products that are offered on the market and a relatively low price. In the process of manufacturing alloy wheels, manufacturers use the latest technologies and high-quality equipment, which makes it possible for developers from Asia to feel comfortable in the regional and global market.

REPLICA (REPLAY)

The manufacturer produces exact copies of the discs that are produced at car manufacturing plants. Products are manufactured in several factories, so the quality varies. It is possible to find products for virtually all cars, since the developer keeps track of updates on the car market. Replay have been producing wheel rims for a long period of time, thanks to which the developer is recognized by car enthusiasts all over the world. In addition, the products are distinguished by a wide assortment and adequate cost.

Pros:

• an exact copy of the original product, which makes it possible to use native bolts;
• usually, replacement is carried out without auxiliary staging rings;
• wide assortment, easy to find by car;
• sufficient reliability.

Minuses:

• products are copies.

ENKEI

Light alloys from a manufacturer from Japan are in great demand not only among car tuning enthusiasts, but also among ordinary car owners. The approximate price for products from Japan is 10 thousand rubles. and is characterized by the following features:

• accurate and high-quality execution of each segment of the product;
• use of high quality metal;
• nanotechnology Pro-tech.

In accordance with the characteristics of motorists, there are virtually no disadvantages. However, it is recommended to avoid driving at high speeds, in particular on uneven surfaces. Since the Japanese make alloy wheels from soft alloys, they soon deform during impacts.

Pros:

• a fairly wide selection;
• a significant range of standard sizes;
• high-quality paintwork;
• easy balancing.

Minuses:

• there are certain claims to the mass;
• it is easily possible to encounter a Chinese counterfeit.

IWHEELZ

The manufacturer produces Iwheelz discs, which are notable for their low price and average product quality. The price of a light alloy is approximately 3000 rubles. In addition, other features of Iwheelz products are highlighted:

• big choice;
• affordable cost;
• unusual style;
• technological development;
• low weight of the disk.

The manufacturer offers products with an average level of performance.

Pros:

• matching cost and quality;
• sufficient reliability;
• a large number of known standard sizes;
• similar in characteristics to the original.

Minuses:

• balancing is necessary;
• no fasteners included;
• unusual nuts.

KOSEI

Kosei is the case when it is possible to purchase high quality light alloys at an adequate cost. From budget models, the products of the manufacturer from Japan will be the most optimal solution. The developer produces spare parts for the aircraft industry and at the same time manufactures high quality wheels that are in significant demand in the world and have received many positive characteristics from motorists.

Kosei light alloys and their high performance properties are appreciated by the Japanese auto giant Toyota, which has adopted them for its own cars from the assembly line. The manufacturer in question produces durable, strong and safe products that meet all international quality standards.

Pros:

• ease;
• quality of materials;
• stable paintwork;
• rim strength;
• easy balancing.

Minuses:

• oxidation of the cover that covers the bolts.

LS WHEELS

The Taiwanese manufacturer of LS Wheels alloy wheels is confidently in this rating. The average cost for them is approximately 8500 rubles. Products from Taiwan are in great demand in both domestic and international markets. Products under the brand in question are primarily distinguished by their adequate cost. At low prices, such discs have all the necessary quality certificates and are distinguished by their durability.

Pros:

• adequate cost;
• great applicability to common car models;
• certified products;
• a wide range of standard sizes.

Minuses:

• not the highest quality in comparison with popular developers.

NITRO

Such alloy wheels make it possible to lighten the load on the car's suspension and help to improve driving performance. They are highly impact resistant, easily balanced and have a durable decorative finish that resists oxidation. Constant updating of models, strict control over the production and quality of products, the use of the latest technologies makes it possible to update and popularize products.

It should be noted that of the Asian wheel developers, the manufacturer in question is considered one of the best, competing on equal terms with concerns from Europe and America. The widespread prevalence in the domestic market is provided by a large selection of products and a variety of colors. The highest prevalence rating is possessed by "rollers" with a radius of 16 inches and more, which makes it possible to use them for passenger cars of middle and high class, for budget crossovers.

Pros:

• strength of discs, impacts are effectively withstood;
• easy balancing;
• bright style;
• adequate price.

Minuses:

• bad paint inside the rim.

YAMATO

Light alloys for cars from Japan are characterized by high design properties, as a result of which these products are becoming the most popular in the domestic market. The great demand for the products of the developer in question is due to the pleasant design and proper resistance to shock and mechanical damage. They are well balanced and will provide precision and quality control.

Particular emphasis should be placed on the outer protective coating. The paint has a special composition that allows you to maintain a proper appearance for a long period of time in a new product.The durability of the varnish perfectly resists the appearance of small scratches and cracks, resists other aggressive factors (including chemically active elements).

Pros:

• great quality;
• reliability;
• nice style;
• cost.

Minuses:

• not identified.

The best Russian manufacturers of alloy wheels

A large selection of products of this type is also presented by domestic developers. The best manufacturers are included in a separate section of the rating under review.

K&K (KIK)

The products of the manufacturer in question are distinguished by affordable cost, reliability and high quality. Today, the developer is considered one of the largest in the world in the production of wheel rims.

Each year, the developer increases his own model range and production volume. K&K light alloys are manufactured using modern and high-tech technology GIMA from Germany. The manufacturer strictly controls the quality of its own products and each stage of production.

A quarter of domestic motorists prefer to ride alloy wheels from the manufacturer in question. When it is necessary to choose the best light alloys, then, probably, the products of the developer from Russia will suit the buyer in terms of their characteristics.

Pros:

• during painting, they use sam-technology (smart molecules), which protects the product from corrosion;
• warranty period - 3 years from the date of sale for paintwork;
• lifetime warranty period for wheeled metalwork;
• a wide range of designs and standard sizes;
• high applicability.

Minuses:

• there is negative feedback regarding the softness of the original oem wheels that are installed in factories.

SCAD (SKAD)

When compiling the top rating of developers for the current year, the Russian manufacturer of SCAD should also be mentioned. The most popular domestic developer of light alloys. It occupies a leading position in the market, having a high demand for products for more than 15 years. The success is due to the adequate price of products and excellent quality. The lineup, in comparison with competitors, is small, classic forms that do not have excess are offered.

When the developer's products were evaluated by the independent expert bureau SUD TUV from Germany, the rating increased significantly, and the Scud products gained popularity in the international market. In particular, products with a radius of 16 and more (up to R 20) have become common. They are distinguished by high strength and durability of the paintwork. The fact that SCAD is massively purchasing the automobile giant Ford to complete its own cars is evidence of a lot.

Pros:

• adequate cost;
• reliability;
• strength characteristics;
• quality products;
• easy balancing;
• strict style.

Minuses:

• heavy in comparison with analogues;
• soft metal.

Selection recommendations

To know which manufacturer's alloy wheels are better to choose, you need to take into account certain factors:

• Style. He can be anything and he is selected based on the preferences of the customer himself.
• Appointment. For a car, alloy wheels have certain functions, which include the quality of car control, lowering inertia, and improved suspension performance.
• Diameter. Must match the inner width of the tire. It is possible to select a large diameter and use a low profile rubber. In such a situation, the disks look more solid, but the wheels will be increased in weight.
• Mount holes and their diameters. If these options are not selected properly, alloy wheels will not be installed. PCD meets the prescribed parameters in the instructions.
• ET (disc departure). A similar distance from the mount to the plane of symmetry, measured in millimeters. Additional stability and appearance of the car is given by wide wheels, but with the smallest offset. But, at the same time, the load on the hub bearings will increase, therefore it is necessary to take into account the manufacturer's advice.
• Rubber. When purchasing alloy wheels for the available rubber, you need to take into account the dimensions of the rim.Narrow or wide will affect tire performance and road contact.
• Quality and choice. Only high quality products guarantee traffic safety. It will not be possible to establish the composition of the metal externally, and sellers will not tell the truth in all cases. Therefore, for the acquisition, it is optimal to contact special salons that provide the appropriate certification. They will make it possible to make the right choice directly for cars and tires.
• Developer. Most manufacturers guarantee high quality products. Often, the developer or the seller himself sells the products along with the fastening bolts, but sometimes they are not suitable for the vehicle. In addition, in production, the diameter of the hole for the hub is increased, which adds versatility to alloy wheels. It is possible to adjust the dimensions yourself by means of the centering rings.

To choose a quality product, you need to familiarize yourself with the rating of common models that are on the market today.

When compiling a rating of alloy wheels for this year's wheels, the characteristics of car owners, statistics and expert reviews were taken into account.