Best Car Jack in 2020

A jack is an obligatory and useful thing for any car, regardless of its brand. With the help of such a tool, you can carry out repair work, as well as easily replace a wheel on the road. With it, any machine rises to a certain height to carry out the necessary manipulations. The design is often simple, so at the moment there are many manufacturers who offer jacks of good quality and functionality. The article describes the various models, due to which the motorist can choose the best car jack in 2020.

The main types of jacks for cars

Today the market is overflowing with automotive tools. Jacks differ not only in capabilities and quality, but also in their design, therefore, it is possible to determine which car jacks are better only after studying all possible types:

• Screw - the simplest and most familiar to everyone. They work by twisting the screw to the sides, which allows raising or lowering the transport. The devices are the cheapest, so they are often found in new vehicles that are sold in salons. Lever-and-screw devices are not recommended to buy, as they are not very stable and without insurance can become dangerous. Rhombic ones are much safer, but the main disadvantage is slow operation and rapid wear of the screw. In addition, such models have restrictions on transport weight and do not exceed 1.5 tons. An excellent choice for easy wheel changes on the track.
• Rack or hijack - a mechanical device with a large stroke and carrying capacity. Recommended to buy for off-road driving fans.
• Hydraulic jacks are bottle jacks with a vertical stroke, which help to raise vehicles to a great height. This makes it easy to change the wheel or make light repairs.
• Roll-up devices - these devices are one of the most expensive, often used at service stations or tire shops and can lift a lot of weight or create the necessary support for vehicle elements.
• Pneumatic are not the most common options, but they take up little space and are powered by a compressor, so the driver does not need to strain.

Knowing the main types, you can select the best models for a vehicle that allow you to perform emergency or planned repairs when you need to raise the vehicle.

Top manufacturers

At the moment, there are many firms that offer jacks for cars, but several leaders can be distinguished:

• AE&T is a Russian brand that produces various accessories for vehicles. The foundation of the company in 2005, since then the sales network has been significantly increased, therefore jacks are sold in any stores. In addition, the devices are of high quality and many drivers are completely satisfied.
• AIRLINE - the company produces many products for drivers and their cars, including tools, roof racks, jacks, etc.The latter type of product is designed for up to 16 tons of carrying capacity, products are characterized by orange color and optimal quality.
• Forsage - the brand often makes hydraulic models in blue and gray. The goods are manufactured in China, but are of good quality. Many jacks last for years and do not cause any complaints.
• MATRIX is a company that produces tools for construction, but there are car jacks in the arsenal. They are characterized by a good value for money ratio, and are always sold with a case to facilitate transportation.
• ZUBR is one of the best domestic firms producing tools for amateurs and professionals. The range includes simple but reliable jacks that give customers confidence in the brand.

The main parameter for choosing a jack is lifting capacity. For an ordinary person, it will be enough to purchase a mechanical model that can lift 1.5-2 tons. Jeep owners are better off taking devices from 3 tons

Screw jack rating

These models are the most common, simple and cheap. It is recommended to buy them for every driver who does not yet have such a tool, because it can come in handy at the most unexpected moment.

Enkor 1 t 28580

The carrying capacity of this model is small, only 1 ton, but this will be enough for a domestic car or small foreign cars. It is recommended to buy the tool for people who change wheels on their own and often. The device is characterized by reliability and excellent quality, in addition, it can lift 2 wheels at once to speed up the work on changing tires.

Pros:

• Simplicity of the model.
• Excellent reliability.
• Possibility to raise transport by 35 cm.
• Weight is only 2.4 kg.
• Low price.
• Minimum dimensions.

The main drawback is in carrying capacity, which limits the scope of application.

Inforce T10202

Not a bad rhombic model that can lift 2 tons at once. The weight of the tool is 3.5 kg, the main elements are reinforced, therefore reliability and safety are at a height. Even on purpose, the jack will be difficult to damage and disable, but experts do not recommend loading it as much as possible.

Pros:

• Raises 2 tons.
• The lifting height is almost 40 cm.
• Optimal weight and dimensions.
• Affordable cost.
• High degree of reliability.

No cons were identified.

Airline AJ-R-02

The cost of this product will be about 850 rubles, which is considered an affordable tool. The model is universal and allows you to work with very tall vehicles. The lifting height itself is 40 m, which will be enough to work with SUVs. Carrying capacity is 2 tons, the device is durable, equipped with a rubber support so as not to damage the paint on the car. For easy storage, there is a removable handle, as well as a bag where the device can be folded after use.

pros:

• Small folded size.
• Affordable cost.
• High strength.
• Excellent stability.

Among the minuses, there is a weak fixation of the rubber pad under the threshold.

Autoprofi DV-15R

An inexpensive device at a price of about 900 rubles with the ability to lift up to 1.5 tons. The lift height is 390 mm. The disadvantages include the lack of a storage bag, but there is a high-quality rubber pad under the threshold.

pros:

• Acceptable cost.
• Availability at retail outlets.
• Quality rubber heel.

The main disadvantage in the screw system, which is prone to wear at maximum loads.

Rack jack rating

Mechanical devices that differ significantly from rhombic in their appearance, but can work with a lot of weight.

Skyway S01803002

This device is visually very impressive and it can seem that the model will lift any weight. The main disadvantage is the cost, which is very overpriced. It is recommended to buy for large cars, in addition, the technique is suitable for lifting metal garages and other structures. The weight of the device is 8.5 kg.

Pros:

• Works with a mass of up to 3.5 tons.
• Lift height 68 cm.
• Excellent reliability and ease of use.

Minuses:

• High price.
• Difficult to transport due to size and weight.

Bison 43045-3-070

The equipment will cost about 3800 rubles. An excellent choice for off-road driving enthusiasts. Raises 3 tons to a distance of 70 cm, there is a model for lifting to a height of 1.1 m. The mechanism is stepping and is reliable, does not require maintenance and cleanliness. A large and comfortable handle is provided for control. At the top there is a hook for lifting not only the vehicle, but also the use of the device as a winch.

Pros:

• Acceptable cost.
• Simplicity of design.
• Unpretentious maintenance.
• Durability.

Among the shortcomings, one can single out weight and dimensions, but they are typical for any rack and pinion models.

Wiederkraft WDK-80603

Visually, the technique seems to be very simple, but in practice the apparatus can lift up to 3 tons, and the main advantage is the height, which is 150 cm from the ground level. Based on the opinions of consumers, such a product is very convenient to use, but its weight is too large, as much as 15 kg, and its dimensions are 50 cm long. In addition, situations of cracks on the latch occur, therefore it is not recommended to give a peak load to the tool.

Pros:

• Possibility to raise the vehicle to a height of 150 cm from the ground.
• Work with a weight of up to 3 tons.
• Excellent reliability.

Minuses:

• The main weak point is the heck.
• Overcharge.
• Large weight and dimensions that are inconvenient for storage in the trunk of a car.

Bottle jack rating

This technique is convenient to use, takes up little space in the car and is characterized by an excellent value for money.

Autoprofi DG-08

The cost of the described model is 1400 rubles, it is recommended to buy devices for drivers who drive a car with a ground clearance of 20 cm or more. An excellent choice for jeeps, since the structure can easily lift 8 tons, which means it is even suitable for a gazelle. The lifting height is 40 cm, when used, the jack performs well, although it is inexpensive. The hydraulic cylinder is made with high quality, therefore it is protected from rapid wear, and the safety valve prevents the cuffs from being squeezed out under heavy load. The main disadvantage is the metal heel, which can damage the paint.

pros:

• Optimal cost.
• Excellent lifting capacity.

Minuses:

• Suitable for SUVs only.
• Not the most convenient descent of transport.

Bison 43060-12

The average cost of a model that can handle 12 tons is 1,700 rubles. It is the carrying capacity that can be attributed to the plus and minus of the jack. For large vehicles this is an excellent choice, but it will take a lot of rolling to get it up. The pickup is 23 cm, so the product is not suitable for a car with a small ground clearance, the rise is up to 46.5 cm.

Ideal for tough jobs, the device is equipped with a special length handle that is used for lowering. The cost is democratic, which is considered a positive point.

pros:

• Works with great weight.
• Excellent durability.

Minuses:

• Large unit weight.
• Not the most convenient descent of the car.

Rolling jacks rating

It is recommended to buy such options for service station or tire workers. On the other hand, jacks are suitable for ordinary drivers, since they can lift a lot of weight and are characterized by excellent reliability and stability.

AIRLINE AJ-3F-500

This model is considered one of the most powerful on the market, among the rolling ones and can handle 3 tons. In addition, the driver does not need to put much effort, but the main disadvantage is the weight of the equipment. It is recommended to buy this model for tire fitting, because with it the transport rises almost instantly, regardless of the weight to a height of 50 cm.

Pros:

• Excellent reliability.
• Works with a weight of up to 3 tons.
• Raises cars by 50 cm.
• Hydraulic control type.
• Rapid lifting capability.

Minuses:

• The weight of the assembled jack is 32.5 kg.
• The cost of the device is very high.

Santool 110103-002

The device is perfect for car and transportation.Equipped with a storage case, an excellent choice for a light vehicle. The model is the simplest, but easily copes with the assigned tasks and works stably. The operation is simplified with the help of hydraulics, the total weight with the case does not exceed 6.5 kg.

pros:

• The presence of hydraulics that simplifies the work.
• Lifts up to 2 tons.
• Optimal tool price.
• There is a case for storage and carrying.
• Reliable construction.

Minuses:

• Lift height only 30 cm.
• There is no rubber heel under the threshold, and without it, paint quickly peels off.

Sorokin HobbyLine 3.520

The average cost of the device is about 2000 rubles. The model is characterized by small dimensions and the ability to work with a weight of up to 2 tons. The device is practical, easy to use on the road or in the garage for repair work. The grip is 12.5 cm, so it can be used for many cars. Raises equipment up to 30 cm.

For work, a removable tube with a convenient shape is used, there is a handle for transportation on the jack, and the weight of the tool itself is acceptable - 6.5 kg. The main drawback is the lack of a rubber heel under the threshold, but it sells separately for about 100 rubles.

pros:

• Small and handy dimensions.
• Work with a weight of up to 2 tons.
• Low roll-up height, which is suitable for use with light vehicles.
• Rigid tube.

Minuses:

• Lifting height 30 cm.
• No rubber heel to keep the sill and paint on it.

Other jack models

There are not quite standard tools on the market, therefore, devices that operate from a cigarette lighter or lift a vehicle using pneumatics are presented below.

Varta V-CJ2.10

This is an electricity model of a jack that can raise the car by 40 cm. The driver does not need to make efforts to do the work, since the control is carried out using the remote control and power from the cigarette lighter. In addition, the device is equipped with a backlight if you need to replace the wheel at night. Many drivers like this product, the manufacturer offers it in a neat suitcase that makes it easy to store in the trunk.

pros:

• To use it, you do not need to exert effort, just put the jack in the right place and plug it into the cigarette lighter.
• There is a remote control with a flashlight.
• Maximum lifting height 40 cm.
• The ability to lift up to 2 tons.

Minuses:

• High construction cost.
• Low prevalence at points of sale.

Trommelberg C107707

It is a pneumatic device that is sold immediately with a valve for inflation and overload detection. It is characterized by very high reliability, can easily withstand pressures up to 9 atmospheres. Drivers say this is the most reliable inflatable design and will fit any vehicle. The device can only be damaged on purpose.

Pros:

• Lifting machines to a height of 44 cm.
• Work with a weight of up to 2 tons.
• Excellent reliability and safety.
• Simple operation.
• Minimum dimensions and weight.

The main disadvantage is the very high price.

Sorokin 3.693

An inflatable jack, which differs from all others in that it can lift a vehicle with the lowest clearance. This technique does not require additional efforts on the part of the driver. Lifting is carried out with the help of exhaust gas; in the kit, the manufacturer offers a splitter to put on immediately on 2 exhaust systems, if this is provided for in the design of the machines.

Based on the reviews, we can say that the device is great for the job. The main drawback is the high cost and low-quality rug. It is recommended to buy exclusively for a passenger vehicle, and at peak loads, the lift height will be reduced, so the wheels of jeeps may not even come off the ground.

Pros:

• The set includes a bag and a mat, there is a splitter for the exhaust system.
• No physical effort is needed to pump up.
• Raises the car by 64 cm.
• Pickup 5 cm high.
• Jack weight 1.9 kg.
• Can handle a maximum of 3 tons.

Minuses:

• The price of the device is very high.
• Poor quality rubber mat.

When choosing such tools, you need to pay attention to the lifting height, which can be 80-100 cm for suburban conditions, and 30-50 cm for the city.You also need to determine the pickup height, since some models simply cannot physically fit under the vehicle, so this value is mandatory need to be clarified. Screw devices are suitable for almost any passenger car, except for a sports car.