Each owner of the pulp has a screwdriver. This device greatly facilitates the repair or installation of furniture. Today, mobile battery models that are not tied to the electrical network are very popular. Of course, this battery is not durable and needs to be charged periodically. In our article, we have collected and described several chargers grouped into different categories. We hope this helps you buy the best screwdriver charger in 2020.
Content
Best Multi-Post Chargers
Such charging will be useful for construction crews, furniture shop foremen or in any other situation where you need to work with several screwdrivers at the same time. In order not to occupy all the sockets, it is more rational to use a multi-post unit that accepts 3-6 batteries. One model is the best in this category.
Ryobi RC18-627
The product is equipped with 6 cells, in which the clips are placed with the long part up. The housing is equipped with a handle for easy carrying of the module.
On the top panel there is a light indicator for each cell. Each of them has ventilation holes. The model has rather high legs, so it is not afraid of spilled water on the surface on which it stands.
The model works perfectly at an ambient temperature of 0 - +50 degrees. Battery status is indicated by LED indication. The 2.5 Ah battery is charged in an hour. This multi-station charger is equipped with supply current and temperature control. Suitable for charging cells with a voltage of 14-18 V. Combines with 23 types of batteries, NiMH and Li-ion cells.
The list of shortcomings is presented:
- dimensions - 50 * 10 * 20 cm, which complicates transportation a little;
- high price - about 7 thousand rubles;
- heavy weight - almost 3 kg.
Best universal chargers
Such a product is used to recharge various screwdrivers. The module is suitable for 10-20 types of batteries of the same brand. Due to the special shape of the seat, it is possible to put in it a certain type of battery, which is common in popular screwdrivers. Here you can put a clip, a slider or a non-removable view.
This category is represented by two models.
DEWALT DCB118
Good reliable charging for DEWALT screwdrivers operating at 18-54 V. Forced ventilation is combined with an adjustable current range, so the battery and the case itself are cooled faster.
The back wall is equipped with holes for wall mounting. The sliders are tight, so they won't fall out even if the charger is dropped. To disconnect them from the socket, just press a special button. The product informs about overheating. The ends of the case are "decorated" with perforations, which provide a through passage of air. The current range is 18-54 V. A 6 A / h battery becomes infected in a little less than an hour. Weighs only 0.65 kg. There is an option to accelerate charging. Fits with all Flexvolt batteries.
The price of the product is 3.2 thousand rubles. Quite large size - 28 * 22 * 26 cm. Users noted that the product heats up during operation.
Ryobi RC18-150
The product is compatible with 18 V clips of all screwdrivers of this brand. It has numerous ventilation holes, so the generated heat is quickly released to the outside. On the sides there are red and green diodes that indicate the status and level of the process.
The product has a stylish appearance. A special support has been created to hold the T-shaped batteries. The body is rubberized along the edges, so in the event of a fall or impact, the body will not split. The 5 Ah battery is charged within an hour. Suitable for all brands with plug-in battery and 18V supply.
The indicator lights up not only at 100 percent charge, but also when the battery is “charged” at 80 percent. This option is based on studies that show that incomplete battery charging will significantly increase battery life. The product is equipped with automatic temperature control and can be combined with Li-ion, NiMH and NiCd batteries.
Some users are not satisfied with:
- tangible weight - 1.2 kg;
- the price is almost 4 thousand rubles;
- large size - 28 * 7.5 * 14.8 cm.
The best chargers for specific batteries
There are batteries that need to be charged only in devices that the manufacturer has approved. Otherwise, it will negatively affect the condition of the battery and shorten its life. Consider the most effective chargers for screwdrivers.
Bosch AL 1130 CV
The model has an automatic cage power adjustment. It independently regulates the current, so it charges the screwdriver to the maximum value. The unit is designed for thin clips of this brand, operating from a voltage of 10.8 V, but only with Li-ion cells. On the back of the case there are slots through which hot air comes out.
The information indicators are located at the front so you can see all the data you need. The area around the slot is slightly raised to make it easier to remove the battery.
The product charges the screwdriver in 30 minutes. If there is a possibility of overheating, it will automatically shut off. It weighs 500 g, dimensions - 21 * 13 * 8 cm. The indication is located in front and is clearly visible. The charger has a long cable.
The disadvantages include:
- combination only with devices such as Li-ion;
- high price - 2.6 thousand rubles;
- voltage - 10.8 V.
MAKITA DC10WA - for clips BL7010 and BL 1013
If you are using a Japanese Makita screwdriver, this charger is ideal. There is a staging socket with power contacts in front of the body. The socket is deep enough to hold the battery upright. A two-color diode is located on the right side. It informs when the device needs to be turned off, shows the charging process and warns about battery overheating.
The product is quite compact - 12.5 * 7 * 22 cm, so it fits easily in a bag. Weighs 0.5 kg. Charges the screwdriver in just half an hour. Informs if the battery is broken. It has a convenient beveled shape that provides a stop at the time of removing the power supply.
The charger is suitable for Li-ion cells. It costs about 3 thousand rubles.
How to keep the screwdriver working?
In order for the screwdriver to work for a long time and efficiently, you need to choose a suitable charger. A few simple rules will help in this matter:
- Examine the passport of the device.
- Pay particular attention to the charging current.
- Do not buy low-quality Chinese products.
- Be sure to discuss the quality of the offered product with a consultant.
It is forbidden to use a homemade charger, as this will adversely affect the battery of the screwdriver. You also need to first determine the type of battery, it happens:
- nickel-cadmium;
- nickel metal hybrid;
- lithium-ion.
Particular attention is paid to the battery charging time: a household drill is charged in at least 7 hours, a professional model - in 60 minutes.
