Best cordless screwdriver in 2020

Saving energy and time when performing various everyday problems, a person gets the opportunity not to waste energy. For this reason, it is not at all surprising that there is a tendency to apply technology that simplifies the performance of technological tasks. One of the most common options for performing in the house is twisting and unscrewing fasteners. Also, the same tasks may become a necessity in summer cottages.

Due to the fact that modern manufacturers offer a choice of a solid range of devices, everyone can buy the best cordless screwdriver in 2020 at an affordable cost.

List of brands

There are many models of tools on the market, and therefore it arises which brand is the best for producing screwdrivers. The entire assortment differs based on a number of indicators. Among them, much attention should be paid to the pricing policy and technical characteristics of the instrument.

The market leaders are Zubr and Interskol, if we talk about the segment of domestic products. The most popular are products from foreign brands Metabo, AEG, Hitachi, Bosch, Dewalt, Makita.

Each of the models of screwdrivers has its own characteristics. But if we talk about the design, then it is the same. Consists of practical elements, it is a gearbox, a battery, and a DC motor. The cartridge regulator, load was no exception. Indicators of autonomous work without recharging will be determined by indicators of capacity and type of battery. If the gearbox has several rotation speeds, then the tool will allow you to drill wood or metal.

Another feature of modern device models is that there is a reverse option available. It is very convenient to use. Due to it, you can switch the directions of rotation of the chuck from one side to the other. By pressing a button, you can switch the tool that carries out the operation of twisting the self-tapping screw to its unscrewing, and also vice versa.

It will be important to notice the presence of key parameters that you should pay attention to when choosing a tool.

Purchase criteria

Battery capacity indicators. If you intend to use a screwdriver for homework, as well as rare inclusions, then you can pay attention to the model, the operating parameters of which will be in the range of 1.2-1.5 A / h. Such a device can give a charge for 2-3 hours. If you purchase a drill-driver model that can be used for work in a workshop, give preference to “capacious” variations.

As for the number of revolutions, as a rule, from 1200-1500 revolutions, which are provided in 1 minute, will be sufficient. These are average values, and therefore will be appropriate for home use.

The supply voltage parameter is able to determine the amount of torque at the output to the spindle. The higher the supply voltage, the easier it will be for the equipment to drill holes and screw in screws that are large in diameter.If you need a model of a tool for the home, pay attention to the parameter 12-14 V.

The chuck must also have a comfortable tooling. It must have a high degree of reliability. The best option is a screwdriver with a single sleeve chuck.

Optional solutions are equally important. Pay attention to the ergonomics parameters. If they are important, then your device can become humble but feature rich. We are talking about punching options, a second handle, the presence of an angle attachment for displaying bits and drills, as well as an extended set of accessories. In this case, a modest instrument will become a professional one.

Rating of the best screwdrivers for home and professional use

The article provides specific information on the choice of a screwdriver, which will be useful in the household. When you are in a market or a store, you can also rely on a consultant's opinion. But keep in mind that it is better to prepare in advance for the purchase, read reviews on the Web of users in order to understand what are the disadvantages and advantages of the tool model presented for purchase.

We have compiled a rating, which includes screwdrivers that match specific features. We took into account the reviews of real people who shared their opinions online. The more responsible you approach the process of choosing a tool, the more pleasant the purchase will be for you.

DS10DAL by HITACHI

A Japanese brand is engaged in the production of this screwdriver. Its cost is about 6,300 rubles. In terms of weight and fast charging capabilities, this option is one of the best on the market.

This is a fairly light tool that weighs 1 kg. It is easy to use and has excellent performance. The torque at the spindle increases up to 36 Nm. The chuck is quick-release. It works with drills with a diameter of 0.8 - 10 ml when working on metal. Peak idle speed can go up to 1300 rpm in 60 seconds.

As for the voltage indicators, the Hitachi battery gives 10.8 V. This is the standard indicator. Moreover, its full charge takes more than 40 minutes. In fact, users are happy with this option. They note that the handle has a comfortable position during drilling work. For this reason, working with the device is comfortable. The package includes a battery and a durable case, which is complemented by a good organizer with excellent roominess characteristics. There is a backlight. It is wired correctly. Due to it, the use of a screwdriver is facilitated, and also presented in insufficient visibility.

BAB-14UX2LI-FDK from BORT

The best inexpensive screwdrivers from inexpensive and high quality options are presented by Worth. This is a Chinese brand that offers really high quality models. The price for this good cordless screwdriver is around 2,250 rubles.

The model is budgetary. She is very interesting. In fact, it stands out from its relatives by a fundamental change in the supply battery. At the same time, the equipment is represented by 2 lithium-ion batteries. There is no memory effect in them. One charge will be enough for 4-5 hours of operation. Recharging varies within 1 hour. True, it was not without a flaw, which is associated with the fact that the power supply is unreliable. When connected to the network, it starts emitting beeps.

The model is equipped with different chips. Among them is the presence of a reverse option, which is a very useful application when working. Also the spindle speed can be adjusted. There is also an option to brake the engine, which prevents the fact of an accident. Idling speed is 1350 per 1 minute. In this case, the torque is 30 Nm.

Summing up this model, you can see that it is worthy of attention. The price is not high, and there are enough options to use at home.

POWERMAXX BS BASIC 2.0AH X2 CASE by METABO

In terms of the ratio of price and quality of the device, this option is one of the best today. The model is produced by a German brand. Let the production base itself be located in China. Its cost is around 6800 rubles. In terms of weight, it's also not a big device. Weighs 800 grams. The tool will allow you to work for a long time, while the hands will not strain.

The best cordless drill has a torque rating of 34 Nm. These are quite powerful characteristics. The battery also pleases, its indicators reach 2 Ah. The complete set is represented by 2 Li-Ion batteries. The device can work without the need for charging for a really long time, and therefore this screwdriver is often bought for professional purposes. You can also use a bit without a chuck, if there is a need to unscrew the screw, drill a hole.

The complete set is represented by a set of bits. They are all contained in a carrying case with convenient features. The quality of the bits is average, it is quite possible to use them for home purposes. But for professional use, it's better to spend money on more durable bits.

Buyers share their recommendations on this purchase in reviews, noting that this option deserves respect due to its positive characteristics. But they also talk about claims regarding the quality of the plastic and the handle, which has become thick.

DA-18L-2K from VORTEX

This model is made at the highest quality. At the same time, it is distinguished by the level of reliability, which is at its best. At a cost, this model is about 4 thousand rubles.

The rotation speed is in the region of 1250 revolutions per minute, while the spindle surprises with its high-quality work. The torque is 28 Nm. The brand masters have established the ability to vary the number of revolutions in the range that is permissible for use. All this allows you to maintain a charge, even if the battery runs at 1.3 Ah.

The weight of the model is 2.2 kg, which is surprising. The budget option, as a rule, should have more modest performance. Actually, this is where the cons end. The screwdriver, according to the owners, is really worth attention. It is provided with charging indicators, everything works fine. By the way, there is a backlight here, which turns out to be useful. And the equipment itself is able to cover all the needs of the master. In general, this model really entered the TOP.

DF330DWE from MAKITA

The device is distinguished by the presence of ultra-fast battery charging. At a cost, it is around 6,500 rubles. The manufacturer is a Japanese brand. This is a drill-driver, which has been able to establish itself as a reliable and high-quality tool. This is confirmed by millions of users from different parts of the world.

Makita also differs in that this model works at a high battery charge rate. Even when discharged from scratch, the device will be ready for use in 30 minutes. True, as for the power characteristics, the model will not be inferior to the leader, demonstrating a maximum torque that reaches 24 Nm.

On the market, the tool is complemented by a beautiful, but most importantly, a very convenient case. It is small in size. It can fit everything you need without much difficulty.

The main feature of this option is the presence of a unique LED attenuation system in the working area. Due to this, the LED goes out, but not immediately after the trigger is released, but gradually. The package contains 2 batteries, which have received the Li-Ion type, their capacity characteristics are 1.3 Ah.

As for the opinions of users, they are happy with their choice and note that any work with such a tool is a joy. They like the design of both the tool and the case, the presence of batteries with good capacity indicators, the battery charge, and the provision of lighting.

But this time it was not without its drawbacks. The device has a low quality of the cartridge itself, and the characteristics of its power are weak.Also, some buyers note that a backlash was noticed on the case.

BR 201LI by PATRIOT

The screwdriver manufacturer is a Chinese brand. On the market, you can buy this model in the region of 5 thousand rubles. The replaceable battery is presented with capacious characteristics. It is rated for 2 Ah. In terms of value for money, this option is one of the best, according to many buyers.

A screwdriver is suitable for housework. He has low characteristics, but quite decent. The main feature is the battery and the high voltage, reaching 20V. There is also an option of ultra-fast charging, which is designed for 1 hour.

From the point of view of operation, there is nothing outstanding in this option. At idle speed, the spindle will be in the region of 1350 revolutions in 60 seconds. In this case, the torque is 29 Nm. Buyers agree that the power rating is sufficient for domestic purposes. Among the advantages of the model are excellent backlighting, as well as the presence of a fuse that will last a long time. It is also convenient that the power button is blocked at its expense.

GSR 180-LI 1.5AH X2 CASE from BOSCH

In terms of configuration features, this option is one of the best. It is worth noting that the screwdriver belongs to the professional range. Its cost is around 7400 rubles. The manufacturer is the German brand Bosch, which demonstrates excellent performance indicators. Based on the words of consumers, in the first months of operation, the tool demonstrates extremely good performance. The machine is a 2-speed machine that does an excellent job of drilling holes that can be small or large in diameter. For example, for metal up to 10 mm, for wood - up to 35 mm. But the torque is around 54 Nm, which makes it possible to perform such operations.

The main problem is the failure of the clamp. As a rule, this happens after six months of use. Runout was recorded on some tool versions, which negatively affects the accuracy of the hole, which is susceptible to drilling. And if we talk about metal, where this fact is not critical, then in the case of drilling in wood, it can cause a number of problems. The screwdriver has actually worked well in practice, and therefore can be recommended for purchase.

BS 18G2 LI-152C from AEG

The German company offers a good screwdriver, which is represented by the best torque indicator. Its cost varies around 10 thousand rubles. Even if the brand is from Germany, but its production is located in China. In fact, many European brands operate in this way today.

The advantages of the model will be indicators of ergonomics. The case is equipped with a special socket where the bit is attached. Also, the torque is 50 Nm, which is the highest range in the entire rating. While working, you can keep the right bits close at hand, which will of course add to the weight of the tool. But if you put in 2-3 options, then this will not at all affect the convenience of work.

It is also important to note the presence of a keyless chuck, torque adjustment, as well as a backlight with an accurate characteristic. The model is made in a strict aggressive design. The main disadvantage is that the device weighs about 2 kg. Overall, the option is very convenient and one of the best to buy in the professional field.

DCD791D2 by DEWALT

This model is distinguished by high values ​​of such characteristics as torque. It is equal to 70 Nm at the spindle. For the price, this device costs around 17600 rubles. The manufacturer is an American brand. The screwdriver has improved performance characteristics. It is able to meet the needs of users who work in the professional field. Despite the fact that the manufacturer has increased the dimensions, the weight of the product does not exceed 1.5 kg. Moreover, various regimes were subjected to modernization.These include the spindle speed, which has increased to 2 thousand revolutions in 60 seconds.

It is very comfortable to work with such a device. It functions with stubborn and viscous materials. This also applies to the need to screw in connecting elements, a variety of self-tapping screws and screws.

Moreover, there are a number of options that can improve the performance of the device. This is speed control, as well as reverse. The device is based on a brushless motor. There will be no problems with switching, and the working resource will be increased.

BDCDC18K by BLACK + DECKER

At a price of 4 thousand rubles, on average, you can buy an American screwdriver. It differs not only in its acceptable cost, but also in the original balance of the main parameters of functioning. It should be noted that today this brand is not particularly promoted in our country, but those buyers who come across its products remain satisfied. This is confirmed by a number of positive reviews on the Web.

A line of screwdrivers with a drill in the inexpensive segment is presented. The model is noteworthy and has a number of working options. In terms of rotational speed, it picks up 650 revolutions per minute to the maximum. This is influenced by a number of restrictions regarding drilling holes in high strength metal.

The chuck torque can be increased up to 30 Nm. This allows in some cases to work with drills of 10 mm. The configuration may be strange, but many buyers are positive about it. It was noted in the reviews that the tool copes with a number of everyday functions perfectly. Ergonomics indicators are at their best, and the battery lasts a long time. Lotions of the additional type function correctly, do not break. In general, this model is suitable for comfortable work.

DCD710C2 from DEWALT

For the price, this device can be bought in the region of 6200 rubles. The variant is distinguished by a high degree of reliability characteristics. The manufacturer is a German company. There is a conflicting opinion on this model. It is due to the fact that, in principle, she has all the necessary properties to work with the instrument at home. By the way, the workshop can be of the highest level. But right there it is worth noting that the indicators of strength and constructive balance do not exclude the scarcity of a set of technical properties, as well as a high price.

The essence of the dissatisfaction boils down to the fact that the torque parameters are equal to 24 Nm, and the spindle turns at maximum at idle speed - 1500 revolutions per minute. In fact, this is enough to work with soft types of wood, as well as loose metal in sheets. A solid effort for this will not be required from the swivel-type mechanism. As a result, as well as a large torque when turning a chuck with a bat or a drill.

Otherwise, the screwdriver will be weak, despite the fact that today there is a large range of materials. For this reason, if you plan to do light work and prefer a reliable design, then this tool, though expensive, is optimal for these purposes. For this reason, he entered our TOP and took a worthy position.

DS18DVF3 from HITACHI

In terms of the combination of price and quality characteristics, this screwdriver is one of the best. The manufacturer is a brand from Japan, which put a price on it in the region of 8600 rubles. The main base for it is a nickel-cadmium battery. It features capacitive plates with high working life indicators. Even though the rotational speed is low - 1200 rpm in 1 minute, the device is capable of delivering 45 Nm of torque. This is quite enough to carry out a full replacement of the drill at home. According to reviews, this instrument has a high impact position in the field of endurance.

Buyers say they like the Japanese manufacturer's decision to make the case with a rubberized surface. Due to this, it is possible to protect the filling of the tool from mechanical damage. Those.if the instrument falls from a height of 3-5 meters, then it will not be damaged.

The features of the model include a wide range of drill diameters, as well as excellent ergonomic characteristics. The chuck supports all drilling options.

As for the disadvantages, there is a complaint in the reviews that the battery has a small capacity. For operation in the modes specified above, 1.4 Ah is not enough.

BR2 10,8Li HD by Sparky

It is a very handy screwdriver that is lightweight, portable and compact. The package contains lithium-ion batteries. There are 2. According to the power characteristics, each of them corresponds to 1.5 Ah. There is a charger in the package. She powers the device in half an hour. This tool will be useful for performing twisting and twisting, even the hardest drilling. Use the first speed for this purpose.

To quickly tighten the bolts or unscrew them, switch to 2 speed. According to the assembly characteristics, this device deserves attention. Buyers note that this is a fairly successful model from the manufacturer, especially in places where it is difficult to get it, it turns out to be successful.

Among the disadvantages is the presence of a case, which is small, and the backlighting is not fully developed. Also frustrating buyers is the slight beating of the cartridge during operation.