In most cases, home renovations involve replacing old finishes, flooring, wiring or wallpaper. In the latter case, the owners quite often decide to glue vinyl wallpaper. However, it should be understood that this procedure is rather time-consuming and complicated, since it is necessary to apply several layers of the finishing device in order to correctly connect the decorated part with the base of the material.
Such wallpapers have a rather impressive mass. If you choose the wrong glue, then in the end the procedure will be performed poorly and you will have to repeat it again.
If you do not have experience in installation work, it is better to immediately invite a specialist. However, it should be noted that the result is influenced not only by the skill of the employee, but also by the quality of the finishing material. Therefore, it is recommended that you buy the best vinyl wallpaper adhesive that has been found to be effective and reliable. In 2020, a whole range of quality products from different manufacturers can be distinguished. It is recommended that you study the rating, which will allow you to understand which adhesive for vinyl wallpaper is better.
Content
Demanded glue manufacturers
First of all, we propose to consider several brands, the main or secondary activity of which is the production of special glue for installing vinyl wallpaper. A large number of chemical enterprises are located in Europe, which occupy a good niche in this business. Among them, the following manufacturers stand out the most:
- Pufas;
- Kleo;
- Henkel;
- Quelyd;
- Leroy Merlin.
We suggest that you familiarize yourself with each of them in more detail. Pufas is a German brand that was founded back in 1928. More than 200 types of various chemical products for repairs and not only are produced here. It is noteworthy that the leaders of this company regularly hold exhibitions throughout Europe, where you can get acquainted with their products.
Kleo is a subsidiary of French production. Representation of this brand is organized in several countries at once. These include Russia. Naturally, the office is located in the capital. Cleo's main business is the manufacture of adhesives. And not only for wallpaper, but also for laminate, expanded polystyrene and so on. In addition, the so-called "liquid nails" are produced here.
Kleo's main competitor is the Quelyd brand. She is also known in Russia, however, as a rule, for the production of other means: stationery, means for fixing carpet, and the like. Quelyd and Kleo compete both in their own country and throughout Europe. However, the list of their products is somewhat different, although both companies produce glue for vinyl wallpaper.
Next in line is Henkel, headquartered in Germany, Dusseldorf. Manufacturing plants of this brand are located in other countries: Ireland, Italy, England, USA and even Brazil. It is noteworthy that one of the offices is located in St. Petersburg. The most popular product of this company in Russia is glue-moment.
Starch based vinyl wallpaper adhesives
To understand what kind of glue is better to glue vinyl wallpaper, you need to familiarize yourself with brief reviews of the most popular and high-quality products, and then make your own decision. The first step is to consider products based on starch. With the help of this substance, the strength of the glue increases; it is able to withstand several layers of heavy material. And the main feature is the price, which is much lower than the options based on methylcellulose.
Axton Vinyl
To get started, we suggest that you familiarize yourself with the product, which is manufactured by Leroy Merlin, a company specializing in tools and materials for construction work. On the basis of the product, a special mixture of starch is used, which is absolutely harmless both to breathing and to the user's skin surface.
One box contains 180 grams of Axton dry glue, which must be diluted. This happens fairly quickly and effortlessly. Detailed instructions for this procedure can be found in the package. One pack is enough to handle 25 square meters. That's about 5-6 rolls of vinyl wallpaper.
Designed by Axton Vinyl, you can apply any kind of vinyl wallpaper. Both paper and fabric components can be used as a base. It is worth noting the excellent penetrating ability of the glue, which makes it possible to bond both layers together.
Pros:
- Leaves no residue;
- Has excellent bonding properties, adhesion;
- Easy to detach from the floor surface;
- Low cost;
- Absolutely harmless and safe;
- It is supplied dry, but it takes 3 minutes to dissolve in water.
Minuses:
- Sometimes lumps appear between the material and the wall;
- Competitive products have a larger volume of adhesive, which is enough for a large area.
Kleo Smart 5-6
Next in line is a product from France, made on the basis of a mixture of starch. One of the main features of Kleo Smart 5-6 is the presence of a bactericidal substance among its components. Thus, the likelihood of mold growth in the wet structure of vinyl wallpaper is reduced to a minimum. One package contains 150 grams of dry glue. For breeding, you need to use the instructions, but they are pretty obvious.
According to the manufacturer, this amount of glue will be enough to process about 45 square meters. That's roughly 8-9 rolls of vinyl wallpaper. It should be noted that these indicators are indicated for a situation where the minimum amount of substance is used. For better and more reliable gluing, it is recommended to apply the glue even more densely. However, this increases the expense.
Pros:
- Excellent material adhesion;
- Low cost;
- It does not dry out for a long time, being in a bucket;
- No lumps when mixed with water;
- For application, you can use a standard brush;
- If the user accidentally applied an extra stain or touched the wallpaper, then the glue can be easily washed off;
- The glue is transparent and therefore does not leave marks on the wallpaper.
Minuses:
- The consumption declared by the manufacturer does not correspond to reality, since the glue must be applied more densely;
- Can only be used on lightweight vinyl.
Swedtex Vinyl
As you might guess from the name, the next step is glue, which is made by manufacturers from Sweden. According to feedback from users and experts, the products of this company are extremely reliable and of high quality. However, its cost is much higher than that of analogues. Swedtex adhesive can be applied to all types of vinyl wallpaper.
One package of the product in question contains 250 grams of dry material. Consumption depends on what type of vinyl is used. If we are talking about light vinyl, then it is enough to dilute the powder in 8.5 liters of cool water and this is enough to process about 10-11 rolls. In the case of dense wallpaper, it is recommended to dilute the glue in 6 liters of water. This is enough for 6 rolls.
It should be noted that this glue can be used as a ground material for a wall.To do this, it is necessary to dilute the powder in 11 liters of water. In all three cases, the final mass will be ready in less than 5 minutes. The dense structure allows you to easily level the layers of glue, while not touching the overall relief.
Pros:
- It is absolutely harmless and safe for both people and any animals;
- Conforms to European standards for vinyl glue;
- Dissolves rather quickly;
- Minimum consumption;
- Allows you to align walls;
- Reduces the risk of fungus in wet areas;
- Even a beginner can handle the kneading procedure.
Minuses:
- Quite high cost;
- You have to wait a long time for complete drying.
Quelyd special vinyl
The next step is French glue with an increased amount of substance. All components of the glue are well balanced, which makes it suitable for all types of vinyl. However, it is worth noting that at least one box contains 300 grams of powder, this amount is enough for about 5-6 rolls. The material dries completely in 2 days. The room temperature must be within the range of +5 to +25 degrees Celsius.
The solution itself takes a long time to prepare. If in the case of the previous options 3-5 minutes were enough, then here it is necessary to thoroughly mix the mass for 15 minutes. Quelyd adhesive is excellent for damp rooms. This includes the bathroom, kitchen, dining room and the like. When the glue is completely dry, the component substance in it will acquire moisture resistance properties. This allows the owner to clean the wallpaper with any detergent without damage.
Pros:
- There is no unpleasant odor;
- Can be stored in a bucket for a long time and not harden;
- No lumps appear when stirring;
- Great for even the heaviest wallpapers;
- Excellent adhesive and fixing properties;
- Easy to apply. Even a beginner can handle the procedure.
Minuses:
- Long dilution procedure requiring constant stirring;
- Quite a high price;
- The table on the packages for reference is not true;
- Waste of material.
Metylan Vinyl
The latest product in the ranking of the best starch-based vinyl wallpaper adhesives is the German brand Metylan. Although it is located at the end of the list. It is also quite high quality and reliable. It is noteworthy that experts from Germany use their own technology, which involves mixing special enhancing additives with methyl hydroxyethyl cellulose. Thus, the company has developed an adhesive with unique fixing properties. It can be used for any kind of wallpaper.
One pack contains dry powder, the amount of which is enough to process 9-12 rolls of vinyl wallpaper. Preparation of the solution takes about 8-10 minutes. This procedure is described in more detail in the instructions. The result is a white paste with a fairly plastic consistency.
Pros:
- Excellent fixing and adhesive properties;
- Divorces quickly;
- There is an application indicator;
- Completely harmless to humans;
- Hypoallergenic;
- Small packaging;
- No lumps.
Minuses:
- Although the indicator is implemented, it is difficult to see it;
- The instructions on the packaging are not entirely accurate. For a more effective application, it is recommended to thicken the mass.
Methylcellulose based vinyl wallpaper adhesives
Now we propose to consider more expensive options, which are based not on a mixture of starch, but on methylcellulose. This substance has a higher adhesion rate. This indicates that maximum efficiency is achieved when used on concrete and brick surfaces. Naturally, they must first be plastered and putty.
Methyl cellulose-based vinyl adhesives cost much more than previous options. Therefore, such products are used only for gluing extremely heavy wallpapers with excellent results from the first gluing.
Moment Vinyl
Today it is difficult to meet a person who has never heard of the glue moment. This is a brand of the German company Henkel, whose products are in demand in the CIS. We suggest considering the product "Moment" for vinyl wallpaper. It is worth noting that the list of components includes both methylcellulose and a mixture of starch. You can purchase a small or large pack. In the first case, it will contain 250 grams of powder, in the second, 500. The first option is sufficient for 5 rolls of wallpaper, and the second, respectively, for 10.
Cooking takes 15 minutes. In this case, the solution must be stirred periodically. The mass itself lacks any smell and color. It can be stored in this state for up to 10 days. However, you must first cover the tank with a lid. Otherwise, the glue will harden rather quickly and become useless.
Pros:
- Even breeding;
- Low consumption;
- Cures for a long time, which gives the user time to adjust the application;
- There is no aroma or smell;
- The composition contains both methylcillulose and starch.
Minuses:
- Prolonged swelling procedure.
Pufas Euro 3000 Special Vinil
The next step is again a German manufacturer, which is quite popular in Europe. A package of Pufas Euro 3000 Special Vinil glue contains 240 grams of substance. It can be used for all kinds of vinyl wallpaper. It is noteworthy that the list of components contains special chemical resins. They make the final solution more viscous and moisture resistant. Complete dissolution occurs within 5 minutes of stirring.
Approximately 200 ml of diluted adhesive is sufficient to process a square meter. Thus, one package is sufficient for mounting approximately 9-10 rolls of vinyl wallpaper. It depends on the type of material selected. The products are completely clean and safe, and also meet European quality standards. This is evidenced by a special sign on the packaging. If you cover the tank with a lid, then the diluted product will be stored for up to a month.
Pros:
- Quite easy to prepare. Even a beginner can handle;
- Low consumption;
- No yellow marks when applied tightly;
- High efficiency of fixing heavy wallpaper;
- The composition contains additional resins that increase the quality properties of the glue.
Minuses:
- Quite tightly applied to the surface;
- The presence of a specific aroma;
- If the packaging is not properly stored, it can absorb moisture, which will deteriorate the substance;
- Even after thorough mixing, lumps may remain.
Recommendations for choosing vinyl adhesive
To select the highest quality, reliable and most suitable adhesive for vinyl wallpaper, it is recommended to consider the following tips:
- For too light wallpaper, it is better to purchase a Metylan Vinyl product;
- If you need to glue wallpaper on a fabric basis, then you should pay attention to the Swedtex Vinyl and Metylan Vinyl options;
- For standard "light" wallpapers, the most budget-friendly but proven brand - Axton Vinyl;
- To save money, you can purchase the Kleo Smart 5-6 option. It is not inferior to analogues in quality, however, it has a rather low price tag;
- Quelyd glue Special vinyl is recommended only for professional workers for installation work in commercial enterprises;
- If you are gluing wallpaper yourself for the first time, it is recommended to purchase Moment Vinyl or Pufas Euro Special Vinil.
