Best Welding Generator in 2020

The best welding generator in 2020 will allow you to create seams on the surface of a metal product, even in remote areas when there are no power lines. Such a tool will be useful in practice. Its properties are reduced to ensuring the generation of the necessary electricity and increasing the current strength, as well as rectifying the voltage in order to create a high-quality level of connection.

In this case, a large role will be assigned to the mass of equipment. The indicators of the duration of work in autonomous mode, as well as the output current, are no less important. Within the framework of our article, 5 of the best welding generators are presented, which allow you to create seams during the need for repair work on field equipment, when cutting metal, or on a construction site.

Welding generators for 220V: the best options

On a number of construction sites, there is a need for high quality connections. In this case, a current strength of about 200 A will be required. These needs are fully capable of covering the devices of 220 V. We hope that our work will benefit you, and you will be able to choose for yourself a really noteworthy version of the device. Well, now let's go directly to the study of models.

DY6500LXW from Huter

The model is equipped with a case with really reliable properties. Each part is located under the roof, which makes it possible to use the device in an open area, even if it is bad outside. The current is 200A at maximum. Power indicators are 5.5 kW. In order to lower the cost per product as a result, the manufacturer used simple elements and equipment to a minimum.

But in order to start the device, a starter is used, both manual and electric. The device operates at a stable output of 220V, which is sufficient to service the welding process and other types of tools. In the presence of a large tank, which is designed for 22 liters. The fuel consumption is very economical. It is equal to 2 liters in 1 hour, which is enough to use the model for 10 hours every day. The output is 200A.

Benefits

• acceptability in price - 55 thousand rubles;
• starting with a manual starter if the battery is low;
• there is a built-in fuel level indicator;
• functioning in heat and cold;
• quick start;
• perfectly cooks with an electrode whose diameter is 4 mm.

disadvantages

• noise when working at 111 dB;
• only one socket for 220 V;
• the weight is heavy by 100 kg, which is inconvenient if you need to transport the generator every day;
• welding current 60A, which is the minimum. This figure is high in order to work with thin elements;
• there may be problems with the candle;
• the oil level exceeds the required values ​​for operation by 300 ml;
• the length of the studs for fastening the welding wires is not enough to handle the terminals of a thick surface;
• the voltmeter reading is a pointer, but not digital. Please note that the scale is small, and therefore you need to look closely, which is not convenient for all craftsmen.

WS 230DC ES from FUBAG

The device is equipped with a tubular frame, which has excellent strength properties.It is powder painted for long-term resistance to corrosion during outdoor work.

The welding current is 230 A at maximum values. A large tank will be enough for welding work for 9 hours. It is designed for 25 liters. At the same time, please note that activities can be carried out at values ​​of 150-160A. The equipment is capable of delivering 220V in a stable manner, as well as converting voltage to DC. To start the device in operation, the manufacturer has equipped a convenient electric starter.

It should be noted that buyers are satisfied with this model, noting that the device is quite quiet. The engine does not exceed 77 dB. In the area of ​​the case there are 2 sockets with a voltage of 220V to connect drills, electric jigsaws or grinders.

It is also convenient that an oil sensor is available, it tells you what the level is and helps to maintain the uninterrupted long-term operation of the equipment.

Benefits

• up to 65V idle speed is presented. This is very convenient for easy lighting;
• the complete set is represented by the battery for the electric starter;
• support up to 5 mm electrodes;
• you can cut metal with a thickness of 6-7 mm;
• equipped with overload protection, which can be enabled at will. There is a separate toggle switch for this. Its shutdown is possible in cases of production necessity;
• equipped with a fuel level indicator that will not suddenly stop the work process.

disadvantages

• automation is not controlled;
• the welding current drops to 50A, but this is too much for working with 1mm sheet metal;
• weight 112 kg, and therefore it is very difficult to carry the device even with a partner;
• no 12V output to charge construction tools;
• the price is more than 90 thousand rubles, which not everyone can afford.

DW190AE by CHAMPION

The model was able to combine an excellent set of indicators required for welding, as well as affordability. Many experts note that when deciding to buy a welding generator, it is worth taking a closer look at this particular option.

180A - this is how much the current reaches the maximum. Agree that this is enough for many works in private construction or the need to repair equipment. The welding cables are securely fastened with studs. They are nestled at the expense of the lambs, and therefore a break from an accidental touching with a foot will be excluded.

The power indicators of the equipment will be 4.5 kW. The frame is equipped with prepared holes for mounting and transporting kit. These are the handle and wheels. The consumption of diesel fuel is 1.75 l / h, which is very economical indicators. Working with 2-4 mm electrodes is simple, there will be no problems with cutting. Voltage control is automatic, which is also one of the advantages of the model.

Benefits

• 65B - idle speed, which contributes to better ignition, which is important for work on a construction site, especially when it comes to a rusty metal surface;
• there are 2 sockets for 220V and 1 for 12V;
• the case is equipped with weather protection;
• the socket is designed for 220V, it copes well with current up to 16A, and therefore the indicator is practical for this equipment;
• the fastening of the terminals is distinguished by reliable properties;
• oil and fuel sensors are equipped on the device body;
• the manufacturer has provided an electronic start;
• the sockets have special protection wings.

disadvantages

• the tank is designed for 11 liters, and this is enough for 5 hours of work;
• noise during operation - 96 dB;
• the welding current does not drop to 20A;
• weight 110 kg, which is difficult for manual transportation;
• there is no automatic control.

380V welding generators: the best options

For more serious construction work, where thick metal is taken into account, you need to use powerful tools. It is the 380V generators that will allow you to boil iron or cut.

TS 200 BS / CF 27754 from MOSA

If you need a 3-phase power source, as well as welding, but there is not a lot of money to buy yourself a multi-optional device, then pay attention to this generator for sure. It works at a current of 190A, is designed for 3 phases.

The manufacturer is an Italian brand. The engine of the Honda brand from Japan is taken as a basis. Power indicators are equal to 8.3 kW. The frame is tapered, which is stable and easy to transport. It works quietly - the noise is not higher than 73 dB, while the power indicators are 8.3 kW. The amperage is generated at 190A, and lowering A is possible to 20. This is convenient if you need to cook thin metals.

Benefits

• open circuit voltage 98V, which makes it possible to ignite an arc on the surface of any coating. These are traces of paint, and corrosion damage, and dust deposits;
• The case is sealed, has side covers of a full-fledged sample

disadvantages

• fuel tank for 6.5 liters;
• manual start by starter;
• gasoline consumption is 3.5 liters, and the device works for 2 hours;
• weight is large;
• lack of automatic control, hour meter, fuel level indicator.

EP300XE from EuroPower

The generator is suitable for serious construction work. Able to issue 2 voltage streams for 220 and 380V. A current is also produced at 300A. The unit has a capacity of up to 7 kW. The device itself is large and solid in weight. Designed to be used throughout construction work on an ongoing basis. The welding current is high, which is sufficient for melting steel with a thickness of 20-30 mm, as well as cutting metal plates - 10-15 mm. Control automation, the hour meter will tell you the time of repair of the power unit so that there is no sudden breakdown.

Benefits

• works with a noise of 75 dB;
• current strength at maximum 300A;
• quality assembly;
• you can cook with an electrode with a diameter of 6 mm.

disadvantages

• weight 164 kg;
• no wheel kit for chassis mounting and hole;
• 20 l tank by volume, which is enough for 4 hours;
• lack of handles, 12V sockets;
• high price - 400 thousand rubles.