The best warm floor in 2020

Heated floors were used many years ago, they were used for baths, and today they are installed in residential buildings under different types of flooring. There are 2 main types of such a device. For one, you need to create a separate pipeline from pipes, connect water, which, when heated, will heat the room, and the second type is electric. Both options are good under certain conditions and can heat the house from the bottom up, which helps to stay comfortable in the room and save on heating. The article presents all possible options for today, which will help the consumer choose the best warm floor in 2020 for rooms for different purposes.

The main types of heated floors and their features

Determining which warm floor is better is not always easy. Both options are hidden under the trim and do not openly come into contact with air. Due to this, dust does not rise, the air retains the necessary moisture.

Water heated floors

This option is relatively inexpensive, but requires proper installation work. In addition, it does not consume electricity, it is connected to the general heating, boiler. But there are several drawbacks, for example, low-power boilers may not withstand the load, and must also have automation. Gas consumption for space heating also increases.

Some people connect the system in the apartment to the main heating, but this is prohibited by law and large fines can be imposed. This option is recommended for use in houses and apartments with individual heating and this is a warm floor, under which it is better to use tiles.

Electric underfloor heating

To understand exactly which warm floor is better for tiles, laminate or other finishing materials, it is necessary to disassemble all possible types of electrical devices. In this case, there are several options:

1. Cable.
2. Infrared.
3. Matte.

The first type is a whole system of cables that have several sections and are connected by couplings. The system is completely safe and can be used even with high humidity indoors. Such an installation will be economical, but the choice must be made in terms of power, based on the area of ​​the rooms. For example, in the kitchen or in the corridor 120 W will be enough per 1 sq. This option is the cheapest of the electric ones, but you definitely need to use a screed for it.

The heating mats are also made as a series of very thin cables, which are fixed on a special fiberglass sheet. Production and distribution in rolls that are visually similar to carpet. Installation is very quick, you just need to roll the product around the room and connect it to a network with a temperature controller. It is the best electric under-tile warm floor as it can be installed directly on the mats.

The last option is infrared warm floors, presented in the form of a film, instead of a cable. It works from a regular network and can be used under carpets, laminate flooring, since it does not require a screed. Installation is very fast and does not require great skills and knowledge; installation will take a couple of hours. The work is not supplemented by the formation of dirt, dust, which is convenient when repairs are made. The film can also be installed on walls and ceilings.

Knowing all the possible options for heating a room, you can determine which warm floor is best to choose in 2020 from the highest quality to date.

Rating of matte electric floors

Such products are very easy to assemble; the mats are fastened according to the manufacturer's instructions. The device is inexpensive and suitable for many people, and which one is better to choose is described below in the rating.

REHAU SOLELEC

These are the best electric underfloor heating from a German manufacturer with high quality and reliability. The mats themselves are easy to install and use. The main source of heat is a high-resistance wire, regardless of the length of the cable, the power is 160 W. Customers and professionals alike give high marks to the product, and a 25-year warranty is a big plus. The cost is quite high, but you have to pay for the benefits.

pros:

• High degree of reliability.
• Durability.
• Excellent quality.
• Warranty for 25 years.
• Simple construction.
• Easy installation.

The main disadvantage is the cost of the product.

Devimat DTIR-150, 450 W, 3 m2

Ideal for a balcony or loggia, since the width of the mat makes it possible to cover the entire room. The cable is fixed to the foil base, and thanks to the mesh it is very easy to roll out the rolls. The power is 450 W, which is enough to maintain the optimal temperature. Complete with a coupling, protection and wires for connecting to the network. Mat thickness 5 mm.

Pros:

• 4 m mains wire.
• Teflon inner insulation.
• A foil layer is used for screening.
• Warms up to 90 degrees.
• Conforms to all standards.
• Can be used under tiles.
• High efficiency due to 2 cores inside.
• Can be used under parquet, carpet and ceramics.

Minuses:

• High price.
• Mats are difficult to cut.

Electrolux EMSM 2-150-4

This product has the best combination of cost and quality, is produced by an Israeli company using aramid yarn - a synthetic fiber with high temperature resistance and insensitivity to mechanical damage. The filament can be melted at a temperature of 500 degrees, and the strength is higher than steel, so the material is used for ammunition for firefighters. The mat itself with a power of 600 W per 1 sq.m. with a 20-year warranty.

pros:

• Performance and high power.
• Excellent quality.
• Modern heater.
• Warranty period.
• Reliability.
• Resistant to temperature and mechanical stress.

Among the minuses, only cost is distinguished.

Equation 1260 W, 9 m2

Due to its high power, this model is recommended to be used for arranging children's rooms. The total power is 1260 W, which helps to easily heat the room, and children playing on the floor will not get sick. The mats are equipped with a wire for connection and protection. Recommended for areas up to 9 sq.m.

Pros:

• To increase heat transfer, the device includes 2 cores.
• The optimal weight of the mat is 3 kg.
• Powered by a regular outlet.
• Easy installation in tile adhesive.
• It can cover up to 9 sq.m.
• Works with thermostats that can be programmed.
• Suitable for parquet, laminate, linoleum or tiles.

Minuses:

• High cost, which starts from 10,500 rubles.
• You need to use a high-quality thermostat that will control the operating time and the need to turn it on or off in order to exclude a fire.

Rating of cable electric floors

When choosing which electric underfloor heating is better, you should pay attention to the cable types, which are the most effective when laying. They can be expanded with a spiral or snake, based on the shape of the room.The cable is flexible, it makes it possible to easily pass the corners and the place where the sofa and other furniture stands, so as not to waste heating the area. When choosing, you need to focus on the thickness and power of the cable.

Teplolux Eco 850 W, 60 m

This option is considered one of the best for large areas, since the length of the cable itself is 60 meters. The product is sold in coils, and the main heating element has insulation for additional protection. Also included is a tape for fastening to the floor. Power is 850 W, which is enough to use the model as a main source of heating.

Pros:

• Selling in large coils with an affordable cost of only 5200 rubles.
• Can be used for glue or screed.
• The cable is suitable for installation under a stone, parquet, tile or carpet.
• Can work in conjunction with thermostats.
• Lightweight for easy transport.
• Good heat dissipation due to a pair of cores placed inside.
• The insulating layer is thick and protects against current.

Minuses:

• Cannot be used for linoleum.
• The connection wire is large and difficult to hide near the outlet.

Teplolux Elite 18TLBE2-23

This option is very popular with many specialists. The cable is produced by a Russian company and there is even established import abroad. A heater of this type has a good quality / cost ratio. It is based on a 23-meter twin-core cable, which is enough for rooms up to 3 sq.m. To make high-quality heating in a house with a large area, you will need to use several wires, but due to good equipment, it will not be a problem to equip housing with heating. The package already contains a tape for fixing the cable, a tube, the heating wire itself and detailed instructions.

pros:

• Sufficient power.
• Possibility of heating large areas.
• Optimal cost.
• Wide area of ​​use.

Among the disadvantages, consumers note the high costs of electricity.

Devi 330 W, 16.5 m

A great option for kitchens from a well-known brand. The product is characterized by a long service life, a sufficient wire length of 16.5 meters, which will allow covering 2.6 sq.m. It is this length that will be enough for a kitchen up to 6 square meters, taking into account the headsets, appliances and other items under which there is no need to carry out heating.

330W wire, gives off enough heat. When cooking, you can open the windows to eliminate unpleasant odors, while keeping your feet warm.

Pros:

• High cable flexibility, making it easier to work in corners and around furniture.
• The ability to use any installation method.
• Optimal performance indicators, which can replace the main heating of the room.
• Easy installation directly into the screed.
• The weight of the set is 1.7 kg, so there will be no problems with transportation.
• Two-core wire that increases heat transfer.
• Any kind of thermostat can be used.

Minuses:

• Quite a high cost, which starts from 4200 rudders.
• The need for a separate purchase of a thermostat.
• Can be used exclusively under tiles.

Energy CABLE 160

A famous product among craftsmen from a British manufacturer. With the help of a cable, you can make a warm and cozy room. The product is characterized by optimal power and low energy consumption. In addition, the manufacturer took into account environmental requirements, therefore, during operation, the cable does not emit harmful substances and is completely safe for the human body.

The wire length is 8.5 meters, the product warranty is 20 years, and the power is 150 W per 1 sq. M. The amount of wire is sufficient for heating only 1 sq.m. The design itself is such that it is suitable for any floor covering, including tiles, laminate, wood, linoleum or carpets.

pros:

• Affordable, the product is sold in any store.
• Easy installation.
• Long warranty period.

Among the disadvantages is a small overlap area.

Rating of film warm floors

The film cover is always used as a supplement to the main heating when it is necessary to reinforce it. Structurally, the models are made in the form of a pair of copper busbars, which are connected using carbon paste. With its help, an electric current is conducted, which serves as a source for heating. The heat itself is emitted as infrared rays. The film is very thin and one of the safest on the market.

PNK - 220 - 440 / 0.5 - 2m2 film heat-insulated floor "National comfort"

Domestic product from the manufacturer «Teplolux "with an affordable cost. The main part of the entire canvas is IR film, which was created by a South Korean company and its specialists. Craftsmen of the construction industry positively assessed the quality of the product, with the help of such a film you can heat the floor and its covering. Recommended for use under linoleum, wood, carpets.

Installation work can be done on your own, the main thing is to carefully follow the steps in the instructions. Complete with film, wiring, tape for fixing and special clamps. Specialists and ordinary consumers highlight the high efficiency of the coating, the quality of production, a long operational period, and all this for an affordable price.

pros:

• Acceptable cost.
• High quality of goods.
• Easy DIY installation.

Among the disadvantages, the insufficient power of the device is distinguished.

Caleo Platinum 50-230W

South Korean product, which occupies a leading position and the set can warm up 3.5 sq.m. premises. The peak power is 230 W. Experts highlight the possibility of sex for self-regulation. This option helps to reduce electricity costs up to 6 times.

The film is suitable for laying under any coating. The use of the material is completely safe due to overheating protection and anti-spark grid. The installation itself is straightforward and is simplified by the video material that comes with the kit.

pros:

• Wide functionality.
• There is an independent regulation.
• Low electricity consumption.

Among the disadvantages, clients and experts point out the high cost with a small area heating.

Caleo Grid 220W 3 m2

This is the best underfloor heating for laminate, tiles or linoleum and is well suited for bathrooms, since the technology is completely safe and does not get exposed to fire. With the help of the film, you can overlap up to 3 square meters, for cutting, a step of 2.5 mm is used, so there are no problems with shortening.

The structure and heating elements are placed on an anti-spark grid, which excludes the possibility of arson. The total power is 660 W per 1 sq. M. and this is enough to warm up and save energy.

Pros:

• The proportion of infrared rays is up to 90%.
• A rich set, which includes clamps for connecting contacts, insulation, wiring for installation and detailed instructions.
• All parts of the device are not subject to overheating, since they can withstand up to 130 degrees.
• Installation is very quick with glue.
• Suitable for laminate, linoleum or tiles.

Minuses:

• Quite a high cost of acquisition, which starts from 6,000 rubles.
• Low efficiency if used as main heating.
• The width of the strips is 50 cm, which is inconvenient and requires joining the strips if the room is large.

Rating of water-heated floors

When choosing the best underfloor heating for tiles, you should definitely pay attention to water models, which will immediately heat the entire room. They are powered by a boiler with a pump. Installation is carried out with the help of special labor, the system requires the installation of a collector that will move water or glycol mixture for heating. This type is suitable for tiles, wood and the owners do not have to worry about fire safety.

Corrugated pipe 15A, Annealed

The best option for a private house or apartment where there is already a boiler. The layout can be without joints over the entire area. The tube is corrugated and easy to handle due to its flexibility, which increases comfort in the event of turns or level changes.In the manufacture, stainless steel is used, which increases the service life and you can safely pour concrete on it. The sale is carried out in packs of 100 and 200 meters.

Pros:

• High quality annealed steel with increased fracture toughness and ability to withstand up to 21 atmospheres.
• High degree of thermal conductivity.
• The pipe diameter is excellent for flow capacity and fast circulation.
• Affordable price per bay.
• Ability to withstand up to 150 degrees and even up to 400 if the impact is short-term.
• Fire safety.
• The pipe has a lifetime warranty.
• Good flexibility of the product, which helps to define any geometric shapes.
• Does not burst in the absence of heating and does not freeze.
• Tolerates water hammer.

Minuses:

• Requires the purchase of additional elements for the installation of a warm water floor.
• Crimping is required before the screed is laid.

Neptun IWS PE-Xa pipe

These are the best budget options for arranging heating in a house or apartment with individual heating. The cost of a 100 m pipe will be about 6,500 rubles. It itself is made of polyethylene, there is a protection that is a barrier from oxygen and is characterized by a long service life.

Pros:

• Excellent flexibility, which makes it possible to expand the pipe with any turns, bends.
• Easy to slip on fittings to fit any manifold.
• The presence of a protective layer.
• Bending radius 8 cm.
• Outside diameter 1.6 cm, which is well suited for laying finishing materials.
• Inner diameter 1.2 cm - great for fluid circulation.

Minuses:

• You need to purchase fittings, pump, manifold separately.
• During installation, there may be creases that need to be corrected with a construction hairdryer.
• Crimping required.
• The screed layer should be up to 3 cm in order to exclude bumps.
• Transportation and storage requires care, otherwise the protective coating will be damaged.

Having studied which warm floor is better for laminate, tile, wood or other finishing materials, as well as having read the rating, it will be easier for each potential buyer to make a choice, taking into account the purpose and characteristics of the room.