Any footwear is subject to negative environmental influences. Snow, water, temperature changes, the sun can cause irreparable harm to both inexpensive and expensive shoes. This is especially true for suede and leather shoes, as well as made of textile materials. Sidewalks and roads are treated with reagents. Mixing with water and dirt, these substances can very quickly render the most resistant material unusable. There are different means for high-quality shoe protection. The purpose of each type of funds is different.
Some can be used for certain materials, for example for zeny or leather. Others are versatile and apply in any setting. You can use regular shoe polish and creams. But they do not always give a positive effect under different conditions. Today we are talking about special fluids. The article will consider: the best water-repellent impregnation for shoes in 2020; appointment; types of impregnating liquids; popular brands and manufacturers.
Content
Types of protective equipment
Today, foreign and domestic manufacturers offer consumers hundreds of water repellents. Users are assured of the particular effectiveness of their products. It is necessary to understand: what is the product intended for, what is its composition and conditions of use.
Water-repellent agents are produced in the form of: thick or liquid ointments; emulsion; spray. For shoes made of natural leather, use a thick cream. It is carried in cold weather. The composition includes: animal fat; solvent; dye; wax. When processing with cream, a water-repellent film is created on the surface.
In the warm season, an emulsion or liquid cream is used to lubricate shoes. Such products are not very suitable for full-fledged protection of shoes from moisture, only for creating a beautiful look, shine. Moisture protection spray lasts longer and is suitable for most materials. Water-repellent aerosol is used in the treatment of clothing and footwear.
Today the best water-repellent agents are impregnations. They differ in composition. Impregnations reliably protect shoes and clothes, penetrating deeply into the material. For any smooth surfaces and leather products, a filling is used, in the composition of which there is silicone.
For fluffy fabrics, nubuck and suede, a fluorocarbon resin product is suitable. For other materials, hydrophobizators are used containing fluorine. There are universal products that are suitable for all types of material.
What is the best water repellent impregnation for shoes?
The main action before purchasing a food is familiarization with the composition. You should pay attention to the certificates. A conscientious manufacturer does not indicate the presence in the product of some mythical component with water-repellent properties. The products contain information about specific substances in a certain amount, for example, fluorocarbon resins or silicone.
It is almost impossible to protect shoes made of a substitute for leather or fabric by any means. Impregnation for products made of smooth leather is completely unsuitable for velor, nubuck and suede.Large amounts of grease and wax are detrimental to suede shoes. When treated with such a tool, the suede fibers simply stick together. The corresponding unsightly look of the damaged shoes appears.
For suede, you should choose products with fluorocarbon resins. The main thing is not to get on fake products, where instead of the last component there is a cheaper substance - silicone. As a result of treatment with such a tool, air exchange will be disrupted. When suede shoes are treated with a fluorocarbon resin-containing agent, the substance penetrates between the fibers and is absorbed. In this case, the structure of the material is not disturbed.
Leather shoes treated with silicone are well protected from moisture thanks to the created film. Moisture is not absorbed and simply flows down, air exchange is not disturbed. A standard set of water repellents for leather goods is suitable for working with membrane shoes.
When choosing a water-repellent agent, of course, we focus on a well-known manufacturer and brand. The following are popular brands.
- Aquabron.
- Futon.
- Woly Sport.
- Grangers G-Wax.
- Olvist SMS.
Despite the quality of the impregnations, the effectiveness of their use will be higher if the shoes are processed on a regular basis. In this case, the original appearance will remain for a long time. In addition to regularity, it should be noted that shoes treated with a water-repellent agent should stand for several hours. Then processing can be carried out another 1-2 times. As a result of such actions, the substances are completely absorbed and the shoes will be reliably protected from the strongest negative influences.
Top best tools
The top best water repellents include impregnations from popular brands and companies. The list is compiled taking into account quality indicators, cost, demand and consumer feedback.
Collonil Carbon Pro
Average cost - 1500 rubles
An innovative spray from German developers is produced using the new technology "Carbon Technology". Collonil Carbon Pro is a universal colorless product designed to protect: from dirt; water; dust; reagents; from burnout. After using the product, the formation of salt streams, adhesion of dust and dirt are excluded.
The spray improves the color of the product, masks small scratches and abrasions, and is highly effective in protecting the product from getting wet. The spray is suitable for all materials, including Sympatex, TexGore membrane products and High Tex materials. The structure of any material is preserved for a long time, provided that the product is used regularly.
The spray protects items from UV rays, preventing fading and drying out of the material. The air permeability of the material remains after spray treatment. Available in 400 ml cylinders. The spray has a shelf life of 10 years.
For reliable protection, it is sufficient to process the product once before each use. The product has a strong odor, disappears quickly. Therefore, the processing should be carried out on the balcony or outdoors. It is necessary to spray the product evenly at a distance of 20-30 centimeters from the product. Then the material must be allowed to dry and soak. After impregnation and drying, the fleecy material is ruffled. Leather products are polished.
Pros:
- The optimal ratio of quality and cost;
- premium class means;
- shoes and clothes acquire color saturation;
- profitability;
- suitable for nubuck and suede;
- ease of use;
- extends the service life of products;
- burnout protection;
- prevents the formation of salt drips;
- universal product, suitable for all materials;
- the ability to mask minor damage;
- long shelf life;
- the effect of the accumulation of protective properties.
Minuses:
- No flaws were found.
Nikwax Fabric & Leather Proof Spray
Average cost - 500 rubles
Universal water repellent from British manufacturers is intended for: leather; tissue; combined; membrane shoes. The impregnation protects: from water; mud; dust.The tool helps to preserve the appearance of the product. The impregnation is primarily used as a water repellent in sports leather and fabric materials. Can be used as a sponge and as a spray.
After processing, the breathable properties of the material are preserved. With regular use, the water-repellent properties remain for a very long time. The release is produced in volumes: 125, 300 and 1000 milliliters. The spray is economical - a 125 ml can is enough for 2-3 months. After uniform processing, the product must be left to soak and dry for several hours. The warranty period is 4 years.
Pros:
- Low cost;
- ease of use;
- economy;
- harmlessness;
- fire safety;
- suitable for combined materials;
- versatility;
- long lasting effect;
- long shelf life;
- lack of fluorocarbons in the composition.
Minuses:
- Slight darkening of the material when the norm is exceeded.
Aquabron
Average cost - 900 rubles
The developers of the tool are German specialists. Production is established in Russia. In the production of impregnation, a special formula is used and the water-repellent properties remain much longer than most of the known products (2-3 months). There are no toxic substances in the product. impregnation has no chemical odor, does not change the color and appearance of products. Suitable for leather and membrane shoes. To achieve a persistent water-repellent effect, processing of products should be carried out 2-3 times with an interval of 2 days. After each treatment, the material should dry well (almost 1 day). The product provides additional protection against salt drips, abrasions and fungus.
Pros:
- Low price;
- absence of toxic substances and chemical odors;
- long lasting;
- protection against abrasions, salt drips, fungus.
Minuses:
- Dries up for a long time;
- the volume of the cylinder is not enough for the season.
Saphir Medaille
Average cost - 1300 rubles
High-performance universal premium impregnation for all types of materials from French manufacturers. The product is suitable for processing products: from nubuck; suede; skin; fabrics; membrane materials; High Tex. Excellent protection against moisture and dirt. The product ensures breathability of products. Impregnation composition: propane (butane); fluorinated resins; silicone oil. The spray formula provides deep penetration of molecules into the material and protection: from water; mud; salt; dust. Available in aerosol cans of 300 milliliters. During processing, the material should be thoroughly impregnated. Work on the street or balcony. Spray the product at a distance of 20 centimeters from the product.
Pros:
- The optimal ratio of quality and cost;
- air permeability of shoes and clothes is preserved;
- long term of validity;
- versatility;
- profitability.
Minuses:
- No flaws were found.
Twist
Average cost - 270 rubles
Multifunctional water-repellent impregnation of Russian production. The product is designed to protect shoes from dirt and moisture at any time of the year. Suitable for processing all types of material: textiles; nubuck; suede leather; leather. The impregnation contains a golden amber resin, which protects the material from moisture and deformation, helps to restore the structure. Of the negative points, a very pungent and strong smell should be distinguished. Therefore, processing must be carried out at a great distance from the product in the open air. After processing, products should be thoroughly dried. This requirement is highlighted in the instructions. The product is available in 250 ml aerosol cans.
Pros:
- A budget option;
- good moisture protection;
- ease of use;
- restoration of old leather shoes;
- versatility.
Minuses:
- Very strong odor.
Salton impregnation
Average cost - 250 rubles
Universal water-repellent impregnation of Russian production is designed to protect shoes from dirt and water.Suitable for all types of material: nubuck; leather; the cloth; suede leather; membrane products. The product can be applied to paint and cream, has a transparent color. Long-term protection and breathability of the material is ensured by the presence of fluorocarbon resin. The composition contains a solvent butane (propane).
For effective protection of the products, regular daily use of the product is recommended in wet weather. The impregnation is applied from a distance of 25 centimeters from the product, followed by drying for several hours. Processing is carried out in the open air, away from sources of fire. Avoid contact with skin and eyes. The impregnation period is 5 years. The product is available in aerosol containers of 360 milliliters.
Pros:
- Low cost;
- large balloon volume;
- versatility;
- provides breathability of the material;
- the effect of the accumulation of protective properties;
- provides masking of small scratches, abrasions;
- prolonged action (up to 1 day);
- long warranty period;
- can be used with other water repellents.
Minuses:
- No shortcomings were found.