Best puncher from Aliexpress in 2020

There are types of repair and construction work in which it is impossible to do without a high-quality hammer drill. This device allows you to make holes in vertical and horizontal surfaces, dismantle the finishing material or destroy the wall altogether. It is not difficult to guess that such units are quite expensive, especially if you buy products from well-known corporations. However, you can significantly save on this issue if you buy the best puncher from aliexpress.

Although the mentioned site has a huge number of users, there are still many people who do not know how to use it and find quality products. In this case, it is recommended to study the rating of the most popular, reliable and high-quality models, and then choose the most suitable one for your needs.

It is quite easy to buy a puncher on aliexpress. The main thing is to decide on the model. After that, you need to make a non-cash payment, fill in your personal data and confirm the order. Within a certain time, the puncher will be delivered to the nearest post office (with free shipping).

Transverse engine models

First of all, it is worth noting that all modern rock drills are divided into 2 main categories according to the principle of engine location: transverse or longitudinal. To begin with, it is proposed to consider the first case. Such units have increased power. In this regard, it is recommended to use them in professional activities.

Mekkan MK-81626

The first puncher from aliexpress that will be reviewed is the Mekkan MK-81626 model. Most of the parts in this product are made of metal. Only the shell of the motor is made of plastic, as well as the handle for holding. This is specifically made for harsh environments. Thus, the hammer drill will not be damaged by external influences.

The maximum power of the model in question is 1050 watts. This is quite enough for the destruction of stone, brick and concrete. If you activate idle rotation, the chuck will move at 4100 rpm. The length, width and height of the product are 27, 13 and 10 centimeters, respectively. The light weight allows you to work comfortably even on a stepladder under the ceiling.

Pros:

• When you press the activation trigger, you can use 3 fingers at once;
• Rubber handle;
• The cooling system is equipped with a powerful fan, which increases the time of continuous operation of the device;
• For each hammer blow, there are about 4.5 Joules;
• Spindle fixation is allowed;
• The basic package includes 3 drills, as well as an additional lance;
• Implemented 2 operating modes: drilling and chiselling;
• Service hatches have been implemented, through which you can quickly change the brush;
• The basic package includes gear lubricant, spare brushes, and a rubber pan for ceiling drilling;
• SDS Plus technology for instant tool changes;
• Reliable grip;
• Mode switching occurs using a special button. It fits tightly and cannot be pressed accidentally.

Minuses:

• Large mass - 5 kilograms;
• There is no blocking in case of accidental pressing of the trigger;
• The fan blows the air flow directly into the user's face;
• Lack of stabilization => strong vibration.

Trendsaw Viktor P-38ER

The top three professional punchers with aliexpress are closed by the Trendsaw Viktor P-38ER model. It should be noted right away that this device has the highest power among all those offered on the Aliexpress website. It is 2500 watts. It is recommended to buy the product in question only when it is necessary to carry out such work for which such force is required. For example, for drilling concrete slabs between the floors of a building, for laying sewers, and so on.

For Trendsaw Viktor P-38ER, drills with a diameter of 2.8 centimeters are suitable. The handle is equipped with dividing gaps. They reduce the vibration feedback to the hand, which increases fatigue-free working time.

Pros:

• Wide stops on the additional handle;
• When drilling, the speed reaches 4600 rpm;
• Low price from 5500 rubles;
• Quite small cartridge, allowing to boil in a hard-to-reach place;
• It copes well with bricks, concrete, asphalt and stone;
• The presence of many certificates that confirm compliance with all quality standards;
• Comfortable mode switching.

Minuses:

• Large mass - 7 kilograms;
• Depth gauge missing;
• Most of the body is made of plastic;
• Slippery activation button.

Ncctec EH3015

If you need to make a large and deep hole in the wall into which some pipe will be laid, then it is recommended to buy the Ncctec EH3015. The working power of this device is about 1500 watts. At the same time, the basic package includes drills with a diameter of up to 3 cm. Thus, the tool is excellent for spiral drilling with subsequent creation of a channel in the wall.

The surface of both handles is made of rubber. This allows you to hold the punch as securely as possible during abundant work. There is a small rubber gasket on the bottom of the motor module. In this way, the user can put the model on the motor during a break without damaging it.

Pros:

• High power up to 1500 W;
• Small size that allows you to work on a ladder;
• Limiters are installed on the additional handle;
• Rubber gasket on the chuck;
• Convenient location of the mode switch;
• Spindle rotation speed - 900 rpm;
• To pull the trigger, you need to use 2 fingers;
• Ventilation with partitions.

Minuses:

• Too high cost (from 16 thousand rubles);
• Weak stabilization => strong vibration;
• There is no reverse;
• The hand gets tired quite quickly when working;
• Resistant to damage from external influences, since the body is made of plastic;
• There is no protection against unplanned device activation;
• Time consuming procedure for replacing brushes.

Products with longitudinal engine arrangement

Now we propose to consider more amateur options that are recommended for use at home or for semi-professional activities. The power of such devices is an order of magnitude lower than that of cross drills. They are more mobile, lighter and less expensive. For repairs in your apartment or house, you should pay attention to exactly this type of product.

Victor P26ER

The next step is an affordable hammer drill, which can be purchased for only 4 thousand rubles. The power of this tool is 900 W, but this is quite enough for domestic use. As the name implies, this model is made by Chinese manufacturers for the Russian market.

The Victor P26ER unit has 3 operating modes. This includes standard drilling, chiselling, and the combined version. On the side of the handle there is a special button that acts as a safety lock.

Pros:

• Wide trigger;
• Depth gauge;
• Holes up to 2.6 cm in diameter can be drilled;
• Ergonomic holder;
• Reverse;
• The suitcase can fit not only the unit itself, but also an extension cord for it;
• Width and length are only 38 and 21 cm, respectively.Thus, the device is quite mobile and compact;
• The basic package includes several additional drills;
• SDS can be exchanged for a classic drill chuck.

Minuses:

• The standard wire is too short. You will have to use an extension cord;
• A drill that is too long may not fit in a suitcase;
• The latches on the suitcase are too flimsy, which quickly break;
• Large weight;
• The body is made of cheap plastic.

Deko GJ180

The last rock drill in this ranking is the Deko GJ180 model. This model is one of the best-selling on Aliexpress. She has about 300 positive reviews and is considered the best option for household use on this site. The body of the instrument is yellow and black, alternating in the middle.

The power is 800 watts. At idle, the chuck rotates at up to 850 rpm. If you use the chiseling mode, then up to 4300 beats per minute will occur. The cartridge model is SDS Plus.

Pros:

• Compact size;
• Good torque;
• Reliable body assembly from quality parts;
• Vibration stabilization;
• Suitable for drills up to 2.4 cm in diameter;
• Stylish plastic case;
• The production is carried out by a well-known company that is popular in China;
• Convenient mode switch;
• Depth gauge;
• Several attachments as standard;
• The additional handle has a small cache where additional drills can be folded;
• Low cost.

Minuses:

• Reducer with plastic housing;
• Weight 5 kilograms;
• Time consuming procedure for replacing brushes. To do this, you need to disassemble almost the entire unit;
• The rubber is only stretched over the rear handle, not both.