Choosing a ring for yourself or as a gift is a rather difficult task. Difficulties often arise when it is necessary to determine the size, since even millimeters play a role here. It is good when a piece of jewelry is purchased for oneself - it is possible to measure it directly in stores and understand whether it will fit or not. To know how to choose a ring size, you need to read the recommendations.
Content
Parameters influencing the choice of ring size
The question often arises of how to choose the right ring size. To purchase a quality product, you need to pay attention to the details.
Shank width (hoop)
The width of the main part of the decoration is an important point that is simply ignored by many. The toes have a conical shape, so high cylindrical rings will pass through the joint without problems, but they will not be able to properly sit on the phalanx, getting stuck in the middle of the path and provoking inconvenience during the wearing process. Key recommendations:
- When buying jewelry with a large hoop, you should choose a piece that is half the size.
- Thin rings should be extremely tight on the finger, otherwise they will twist and fly off.
- The sizes for rings with large stones are selected end-to-end so that the product does not dangle on the sides.
Exposure to air temperatures and time of day
The dressing period also plays an important role. In the morning, late in the evening and after heavy physical exertion, the human body will swell somewhat and blur, although this cannot be noticed from the outside. At such moments, there is no point in taking measurements from your fingers or trying to put any ring on your hand in stores.
It is optimal to postpone shopping in the middle of the day, when a person is active, muscles and blood vessels are in good shape. Ideally, when there is the option of measuring the jewelry you like 3 times throughout the day (in the morning, in the daytime and in the evening) - in particular, if you are purchasing a ring for daily wear.
Weather can also affect the parameters of the human body. In summer, due to vasodilation, it will slightly increase, and in winter it will become smaller in volume. This circumstance should be taken into account when purchasing a ring.
Dimensional grids of various developers
Above, the parameters of jewelry are indicated in those units that are used by domestic developers. Similar designations for jewelry are provided by German manufacturers. However, other countries have their own measurement systems: there are a large number of them, which makes it easy to get confused in them:
- In France, the dimensions of the jewelry in question will correspond to the circumference of the finger in millimeters. In Switzerland, a similar system is used, but the marking is recorded a little differently: 4 cm is subtracted from the circumference and only the remainder is indicated.
- Very similar grids are used by Italian and Japanese developers, although there are still minor differences between them. Here the dimensions are in the range of 4-26 - it will correspond to a diameter of 2.25 cm.The pitch fluctuates significantly.
- The USA and Canada have their own scheme - these designers mark jewelry in the range of 3-13 sizes.
To determine the appropriate size of the considered jewelry, it is possible to use the formula: (Finger diameter - 11.5) ÷ 0.83. The finished results are rounded to the nearest whole or half numbers.
The best ring manufacturers - which company to choose
When you decide to buy a ring, you need to choose the best. It should be liked by its appearance, as well as by the workmanship. It is extremely disappointing when an expensive and beautiful piece of jewelry, after a few months, begins to fade, become covered with small scratches, or loses a stone.
To prevent this from happening, you should choose products from well-known developers. Even if the user does not have enough funds to purchase the most popular rings from Cartier, Bvlgari or Tiffany, there are quite a few brands on the domestic market that offer quite beautiful jewelry.
The best foreign developers are old jewelry companies that are famous in the world:
- Piaget;
- Harry Winston;
- Van Cleef & Arpels.
Among domestic producers, young companies should be distinguished:
- Markin;
- JUD “Cluev”;
- Jewerly Theater.
The named manufacturers independently develop the style of the rings and produce truly high-quality jewelry. In their lines you can find rings made of gold and silver, rings with precious stones, unique products inlaid with pearls.
However, whatever the luxurious ring, it must correspond to the size of the owner, otherwise such a gift will not bring joy.
How much is the ring
Of course, such a gift is quite expensive. The cost of such a decoration will fluctuate, due to a large number of factors, in particular metal:
- Bijouterie made of jewelry alloy will be released approximately in the amount of 150-3000 rubles.
- Ordinary non-incrusted silver rings can only be purchased for 300 rubles. Expensive items with precious stones or pearls will cost 27,000 rubles. Men's jewelry costs 2-6,000 rubles.
- An uncomplicated gold ring will cost about 3.5-76 thousand rubles, for a chic jewelry that includes various metals you need to pay 6,000-1,000,000 rubles. A gold ring for men costs 10-120,000 rubles.
- Platinum jewelry is considered the most expensive. For a small delicate decoration, even domestic developers will ask for at least 8-9 thousand rubles. And the price of a designer ring with precious stones will reach 2-3.5 million rubles.
Types of rings
The ring is a symbol of infinity and has a large number of options and incarnations: classic forms of jewelry, a variety of modern products. In each individual situation and individuality, you can choose an original model. When choosing a ring for yourself or as a gift, you should familiarize yourself with the variety of types of rings.
Simple
Rings for weddings, religious ceremonies, solid rings are considered common. There are no large stones, but it is possible to replace them with a scattering of small ones. In addition, such items are often made from various precious metals.
Pros:
- a significant range of jewelry for women and men;
- simple, bright style;
- suitable for daily use;
- will not cling to clothes and hair;
- no special grooming is required;
- dimensions, if necessary, can be made smaller or increased - roll out the decoration when the user has grown fat.
Minuses:
- some users find jewelry too modest.
Complex
Signet rings, rings with large stones, ornaments of unusual shapes are considered complex. They are distinguished by their bright decor, so they are usually worn only "out". Such jewelry will attract the attention of others - they are large enough and look luxurious in any situation.
Pros:
- bright style that will not go unnoticed;
- are self-sufficient and do not need the use of auxiliary products;
- a large selection of jewelry for any consumer and budget.
Minuses:
- such models are difficult to clean, and it will often be necessary to do this due to the large number of decorative components;
- sometimes they are able to cling to hair or clothes, tear tights.
Ring size determination methods
The question often arises of how to correctly determine the size of the ring. A particular difficulty arises when the jewelry is intended for another person. In order not to be mistaken with the choice, you should familiarize yourself with the following recommendations.
By reference
When a key date approaches - the anniversary of a loved one or the anniversary of an event - the person begins to fuss and look for the necessary gift. This is often a ring or signet (when intended for a man).
It is rather difficult to measure the finger for what the gift is intended for, otherwise the surprise will spoil. However, it is possible to buy the ring that he often wears, to choose the dimensions of the new over the old as a sample.
There is no need to steal or take value out of the premises. You just need to find samples on the net or in other catalogs, and then attach the sample to the circles in order to determine the exact dimensions. The decoration should match the design in the best way. When it is a little smaller, you need to throw on half the size.
It is possible to simply put an old piece of jewelry on paper and circle it inside. With such a template, you can easily find the required size in the store.
The easiest but most reliable method is to put the sample ring on your own finger and mark with a pen where it fits firmly. Then, in a jewelry store, it is possible to simply try on rings when looking for similar in size.
By finger diameter
When it is not possible to measure jewelry, you will need to take measurements as expected - from your finger:
- A thread that does not stretch, or a thin tape of paper, no more than 0.3-0.5 cm wide, is taken.
- Wrap around the base of the phalanx.
- The place of the joint is marked with a marker.
- The thread is unfolded and the length is measured to the mark with an ordinary ruler.
In addition, it is required to take measurements near the finger joint, and then the arithmetic mean is derived from 2 indicators.
Thus, it is possible to choose an ornament that does not dangle or press. In addition, in order to take measurements, it is still optimal to use a paper strip - it gives accurate data, taking into account the width of the rim.
By calculating the length of the circumference of the finger, it is possible to find out its diameter - this will become the size of the jewelry. Then this figure is divided by the number Pi, and then the closest indicator from the series 14-25 is selected with a step of half a millimeter.
In any situation, having made accurate measurements of the thickness of the finger, it is possible to go to the seller and ask him to choose the required ring.
By clothing size
A rather unusual way, which is based on the laws of body proportions. Of course, it is not very accurate, but when other methods are not available, it is possible to use it:
- S in clothes will match the ring size 15.5-16.5;
- M - 16.5-17.5;
- L - 17.5-18.5.
- Each “X” will increase the jewelry's diameter by 1 size.
How to choose the right ring size for each finger
Often the question arises of how to choose the size of the ring on your finger. Often, when it comes to choosing the size of jewelry, they suggest the ring or middle fingers. However, many do not know how to choose the size of the product when it is supposed to be worn on the little finger or other fingers:
- Large is sometimes close in size to medium, and also much larger due to the wide phalanx. When choosing a thumb ring, keep in mind that it is difficult to put on and take off. At the same time, it sits comfortably on the finger.
- The index finger or finger, which gave the name to the ring, needs a wider or larger decoration that fits tightly on the finger, at the same time, it will make it possible to bend it easily and does not interfere.
- The middle is sometimes the same size as the index.When a person is convinced of this, you need to choose jewelry that is worn on both fingers.
- On the nameless one, they wear engagement rings. They must be chosen very carefully in size. Regarding other jewelry, the recommendations are the same: the width and size of the ring are taken into account, then it will be used with comfort.
- Choosing the size of a pinkie jewelry is a difficult task. It is less involved in gestures and everyday actions with a finger, therefore it is the least controlled: the risk of losing jewelry is quite high. Small, tight-fitting, streamlined ornaments are selected.
Often the question arises as to which ring size to choose. To find out how to purchase a quality product, you should read these recommendations.
