Best roof shingles in 2020

Tiles have been used for a very long time and are considered an ancient material for arranging roofs. The advantage of this material is its insensitivity to fire and wind. In addition, sound insulation is created, and the roof itself is insulated. After installing the tiles on the roof, they can serve up to 100 years.

Previously, it was made exclusively from clay, but today different manufacturers offer more modern raw materials. Before choosing, it is recommended that you determine which is the best roof tile on the market today.

Main types

The best tiles in 2020 are represented by 4 main types:

• Classical - shingles that were used for roofs many years ago. The manufacturing process has barely changed, apart from some improvements. The manufacturers were able to make a wider range of colors, and also use substances that exclude the formation of mold. The cost is very high, which affects the popularity, but its quality is at a high level and is considered one of the best. It is characterized by durability, safety, noise and heat insulation properties.
• Metal tile is an inexpensive material with a beautiful appearance. Installation work is carried out quickly and at an optimal cost. Visually, the roof is similar to the finish with natural tiles. There is a large selection of colors on the market. The downside is that you need to carry out additional insulation work, insulate the surface inside.
• Flexible shingles are created on the basis of bitumen, which is mixed with stone chips and colored elements. The coating is quite thin, but has good insulating properties. The material is soft, so in case of heavy precipitation, noise is damped and the room will be quiet. The main plus is flexibility, which will allow you to clad a roof of any shape and complexity.
• Composite shingles - affordable, sold in galvanized sheets, on which chips are glued and all this is painted with a protective coating. Due to the relief structure, the product is visually similar to the classic version.

Now you can figure out which tile is the best from each described option.

TOP ceramic tiles

This type is considered natural and is created on the basis of clay, which is annealed to achieve high strength. Sold in red, brown with different shades. It is characterized by a long service life.

Roben Piemont Autumn Leaf Engobe

The best option among natural roofing material and a beautiful appearance that shows uneven firing. This makes the roof color different in certain areas. The effect of autumn leaves appears on the large roof, the appearance of the building will be luxurious. It is sold in the size 47.2x29 mm.

Pros:

• Enhanced smoothness of the upper part, which is achieved thanks to the special Engob coating. A liquid layer is spread on it, after which everything is placed in a kiln for firing.
• It is allowed to be used for roofs with a slope of 22 degrees.
• The profile is flat, so snow, rain, etc. quickly come off the surface.
• One pallet contains 240 tiles, so you can save on supplies to the construction site.
• It is not exposed to cold and heat, temperature is not transferred under the roof.
• Fire resistant material.

Minuses:

• High price, one element costs about 160 rubles.
• Large weight, one unit of goods is about 4 kg, which requires a strong and reliable foundation of the building, as well as a high-quality mounted lathing.
• For facing 1 sq.m. roof will need to use 11 units.

Koramic Alegra 9 Brown Engobe

A ceramic product that is one of the best for roofing work, when the main task of the owner of the building is to create a beautiful and neat appearance while maintaining the classic forms. The shingles are small in size with a groove for precipitation drainage, there are locks that allow strong and reliable connection of all elements.

Due to the small ridge, there is a high degree of resistance to winds, but this has a positive effect on the appearance. The product from a Polish company has a smooth surface, so snow and water drain off quickly.

Pros:

• It is sold in a small size of 31x47.7 mm, so it can be transferred in large quantities with a compact placement on a pallet.
• Useful dimensions 26.9x40.6 mm.
• The pitch of the lathing for reliable fastening should be 39x41 mm.
• The pallet includes 210 tiles at once.
• To cover 1 sq.m. roofs must be used 9 pieces.
• Arrangement of the roof with an inclination of 18 degrees is allowed.
• High degree of strength, the surface is not subject to mechanical impact from stones, hail.
• The material does not burn.
• Low profile neat and beautiful appearance.

Minuses:

• Large shingle weight of about 4 kg.
• The high cost of the product, about 140 rubles per unit.

TOP cement-sand tiles

For those who want to buy tiles at an affordable price, it is recommended to pay attention to these models, since the reduction in the price of goods is achieved by a combination of sand and cement. At the same time, the classic design of the material is preserved, as well as strength and other characteristics. The surface does not burn, easily reflects the sun's rays, is not exposed to mechanical damage, wind, and all this is 4 times cheaper than ceramic types.

Sea Wave gray economy

One of the best options at the lowest price, which is recommended for summer cottages, garage and other buildings. The average cost of a product starts from 25 rubles per tile. It is made in the form of 2 waves, it is intact, and the second is used to overlap another tile. At the junction there are a couple of grooves to improve water flow. The overall structure makes it possible to withstand heavy loads like ceramics.

Pros:

• Quite low unit price.
• For covering 1 sq.m. the roof needs almost 10 tiles.
• Large dimensions, which are 42x33 mm and help to increase productivity during installation work.
• There will be 240 units on the pallet.
• When used, the best cement model M600 is used.
• Withstands heavy loads.
• You can use a batten with dimensions of 32x37 mm.

Minuses:

• The large weight of the product, which is 4.3 kg, increases the requirements for the quality and strength of the batten and the foundation of the building.
• No additional protective coatings.
• It can only be used for roofs with a slope of 35 degrees, which will allow precipitation to pass normally.

BRAAS Frankfurt red

An excellent concrete option for a large roof area. Often used for attic floors. The average price for a tile will be from 55 rubles, so the owners of buildings can save on roof finishing in comparison with analogues. Roof tiles with 1 whole and half wave, which is needed to cover another tile and bond the material. Sold in large size 42x33 mm.

Pros:

• Excellent red color, similar to real ceramics.
• Affordable unit cost.
• Can be used for roofs with an angle of 22 degrees.
• Well-marked grooves for a tight connection.
• Does not fade under the sun.
• Does not let heat into the room in summer.
• There will be 240 units on the pallet.
• Casting of excellent quality.

Minuses:

• Large weight within 4.5 kg per 1 tile.
• For 1 sq.m. roofing is necessary from 10 tiles.
• Not covered with protective substances.
• For installation, the lathing must be shallow in the size of 31x34 mm.

TOP composite shingles

Due to the complex structure of the product, the cost is considered one of the highest, but the roof is beautiful and very durable. It is based on galvanized steel with silicon. Stone chips, paint are applied to it, all this protects against fading and mechanical damage, in addition, good insulating characteristics are achieved.

LUXARD Roman absinthe, 1330x430 mm

Good soft tiles for restaurants, hotels and similar buildings, due to the expensive finishes with stone chips. Outwardly, it looks expensive, is characterized by durability, degree of protection from moisture and other weather factors. It is made in large sheets with wide waves, so it will be easier for the snow to melt.

Pros:

• Large dimensions, simplifying the work, are 1330x430 mm.
• The plates are thick, therefore they perfectly insulate from temperature and sounds.
• During heavy rain, there is no extraneous noise in the room.
• Does not conduct electricity.
• Large waves distribute the load evenly over the surface.
• Internal double galvanized steel sheets.
• The optimal weight of the product is around 3.5 kg per sheet.
• Thick metal.
• Does not burn.
• High degree of sheet elasticity.
• Average service life is about 50 years.

Minuses:

• The average price starts at 550 rubles per sheet.
• The lathing for such material should be a step of 37 cm.
• After a while, the crumb begins to crumble, especially in places of high load.

METROTILE MetroBond

An excellent option for rooms that need to be distinguished against the general background with an original appearance. Produced by a Belgian company. The panels are large, with semicircular docking lines on them, similar to reptile scales. The design itself is rather complicated, which attracts the glances of passers-by. Due to the brown color, the roof will fit any finishing materials that are used for the walls.

Pros:

• Large dimensions that allow you to quickly sheathe the roof and are 1305x415 mm.
• To close 1 sq.m. you need to use a little more than 2 sheets.
• The optimal weight is in the range of 3 kg per 1 sheet, so there will be no heavy load on the crate and foundation of the building.
• The waves are 3.7 cm high, which increases reliability, the snow does not accumulate, and the wind does not tear off the material.
• Inside a layer of steel 0.5 mm.
• Can be used in frost down to -50 degrees and in heat up to +100 degrees.
• Long-term color retention.

Minuses:

• The high cost of goods, which starts from 950 rubles per sheet.
• Due to the use of stone chips, snow can remain on the roof for a long time.

Best flexible shingles

This product for roofing is in great demand and is a modern type, which is made on the basis of fiberglass with bitumen applied to the surface. This allows for excellent isolation. Due to the connection technology, the joints are sealed, the wind is not an obstacle. Approximate operational period up to 50 years, subject to correct installation. It is difficult to determine which shingle is better to say, but there is a clear leader in the market, which is described below.

SHINGLAS Country Dragon Tooth, Arizona

An excellent option for both horizontal and vertical roofs. It is characterized by low weight, flexibility, elasticity. Sold in strips of 100x33.5 mm, which speeds up the work. The surface is in the form of trapeziums with projections and dense parts, so the appearance is very beautiful and the bituminous part is even invisible.

Pros:

• Affordable price, starting from 390 rubles per 1 sq.m.
• High insulating performance thanks to multiple layers.
• Little crumb loss.
• Externally, after installation, an imitation of stone appears.
• It can withstand frost and heat up to 110 degrees.
• Average service life is 50 years.
• There are 36 sheets on the pallet.
• Easily resolved with an ordinary knife.
• Product flexibility.
• Not exposed to mechanical damage.
• Bitumen provides additional protection against water.

The main disadvantage is that crumb can fall off, where snow often melts.

The article is for informational purposes only and does not force the purchase of the described goods, therefore, each person determines for himself what will be tiles or metal tiles on the roof. Much depends on financial capacity and personal preferences.