The best Interskol rock drills in 2020

Interskol perforators are considered an excellent analogue of foreign products, as they are equipped with the same parameters, but have a lower price. The models of this developer will not be an exception, they are divided into home and semi-professional devices.

From this list of the best products, it is possible to find common rotary hammers for working with stone, bricks, concrete, wood and metal, when installing the corresponding drills. To choose the best Interskol rock drills in 2020, this rating was compiled.

The best household rotary hammers Interskol

They are budgetary tools for the installation of hinged furniture, household appliances or bulk work on hidden wiring. According to the parameters of the device, it will surpass the products of analogues of foreign developers, and the price of the domestic manufacturer is significantly lower.

P-18/450 ER

It is the best perforator Interskol for making holes in the ceiling or in hard-to-reach areas, as it can be held in one hand due to its low weight.

The product is equipped with a reverse, which is located above the trigger, a wide lower stop on the handle (prevents slipping in wet hands). Small parameters will be comfortable for working on a ladder.

Pros:

• there is a retainer in order to limit the depth;
• the blow is characterized by the vacuum-compression principle;
• 2 supporting handle with a change in the angle of inclination;
• adequate price;
• regulation of turnover on the trigger;
• 2 rubber grips;
• the number of blows up to 7500 / min;
• the spindle can rotate at speeds up to 1650 rpm;
• 2 modes for drilling and drilling;
• it is possible to create holes in concrete with a diameter of 1.8 cm and in wood up to 2.4 cm;
• integrated protection against interference in the mains.

Minuses:

• insufficient impact force;
• performance of 450 W is sometimes insufficient for long-term work;
• with the help of a dense cuff, thin drills are firmly fixed, which complicates extraction;
• there is no hammer mode, no drilling.

P-24 / 650ER

It is the best perforator Interskol due to its own democratic price, which is less than ordinary percussion products from foreign manufacturers. At the same time, it has sufficient performance, which is enough for various types of work in summer cottages and in houses.

The handle of the product is supplied with rubber inserts from the front and back to the top. The mode switch will be located on the right side and has 3 positions: drilling, drilling and chiselling.

Pros:

• comfortable grip due to the limiter at the bottom and the wide trigger;
• the start key is fixed;
• adequate cost;
• part of the housing made of rubber with a gearbox protects against cracking during a fall;
• rearranged 2 handle;
• the safety clutch is triggered when the drill is blocked;
• aluminum alloy body;
• quick replacement of the drill due to the presence of the sds plus chuck;
• comfortable mass;
• a hole 6.5 cm in diameter will be created in the concrete through a crown, and 2.4 cm in diameter with a drill;
• the blow is carried out with an effort of 2.3 J;
• in order to start the reverse and release the drill, a lever with the rotation of the brush is provided;
• cord 4 m long.

Minuses:

• there is no drill chuck;
• the reverse switch will move randomly from vibration;
• noise during operation.

The best semi-professional rock drills Interskol

This line is characterized by a higher productivity and impact force, which surpasses the parameters of foreign counterparts. They are used for long-term household repair work or for the purpose of occasional production activities. It is extremely important to focus on performance, impact force and the number of modes.

P-28 / 800EV

It is considered the best Interskol perforator for professional work under the ceiling, where it is often necessary to intercept by hand and drill close to the wall. For these purposes, the product has a transverse engine, which allows you to effortlessly hold the device and give a small length of 33.7 cm.

D-handle with wide trigger is suitable for 1-handed operation. 2 the handle will provide an opportunity to emphasize and support the device.

Pros:

• the hammer drill can be placed on the engine, as a stand;
• fully rubberized handle;
• the proper mass for use throughout the day;
• good performance;
• the rotation speed will change taking into account the density of the materials;
• the number of strokes is set in the range of 0-5780 / min;
• a cord length of 4 m will make it possible to do without carrying in a small room;
• drilling wood with holes up to 2.4 cm, and in concrete with a 2.8 cm drill;
• the spindle can rotate up to 1250 rpm;
• there are 3 modes for different production tasks;
• in the body itself there is a vibration protection system, which reduces the load on the human limbs.

Minuses:

• overcharge;
• the volumetric motor prevents the auxiliary stick from being properly supported;
• ventilation on the gearbox provokes dust accumulation on the main unit;
• no drill chuck.

P-26 / 800ER

It is considered the best semi-professional product from this manufacturer for the purpose of drilling dense materials, since the model is equipped with a capacity of 800 W and a shock of 3 J. This makes it possible to effortlessly cope with different densities and structures. The device is delivered in a plastic case, which is comfortable for transportation.

The ribbed top will prevent damage during a fall. The front part is made of aluminum alloy, so it will extend the life of the rock drill in difficult building conditions.

Pros:

• there are 3 modes of operation, including the chisel is fixed without rotation with the vario-lock option;
• large upper handle stop;
• regulation by means of a speed ring;
• the start button is fixed in order to relieve the finger while drilling;
• holes are provided for mounting the depth limit, so as not to lose it after the end of the application;
• comfortable grip with a curved main handle and rubber pad;
• the cartridge makes it possible in the shortest possible period to change the equipment in the process of various kinds of work;
• adequate price;
• adequate weight for long-term operation;
• a wire length of 4 m makes it possible to carry out surgical intervention by making a connection directly to the outlet;
• high performance;
• makes holes up to 2.6 cm in concrete, 6.8 cm in brick (by means of a crown);
• the device can drill metal (holes up to 1.3 cm);
• blows are applied with a frequency of up to 5400 beats / min;
• there are no levers in the reverse;
• a special coupling will prevent damage to the bushing;
• the main axle speed is 1250 rpm.

Minuses:

• large dimensions, as a result of which the product will take up more space during transportation, uncomfortable in narrow places;
• no chuck for drilling;
• anti-vibration system is not provided.

P-26 / 750EV

A good perforator interskol for working in narrow areas, where the width of the passage is sometimes 40 cm, but you will need to drill holes.It is comfortable to use the device in question with 1 hand due to the length of 35 cm and the engine.

All keys for switching purposes are accessible during operation (change speed, select mode). The cartridge will not obstruct the view and will make it possible to replace the equipment in the shortest possible time.

Pros:

• the back of the handle is fully rubberized;
• there is a launch lock;
• D-shape for a firm grip;
• there are 2 modes of operation;
• light weight;
• good performance;
• impact force makes it possible to cope with concrete;
• a special coupling separates the motor and the axle with the drill during seizure;
• the number of strokes is set by the buyer in the range of 0-4500 / min;
• there is a regulation of rotation with a wheel on the trigger;
• the product makes holes in metal up to 1.3 cm, in concrete 6.8 cm, if a crown is present, 2.6 cm with a drill, 2.4 cm in wood;
• wire with good length up to 5 m;
• there is a depth limitation in the configuration;
• there is an electronic reverse system.

Minuses:

• it is uncomfortable to hold the handle 2 due to the proximity of the motor;
• overcharge;
• no drill chuck;
• vibration protection is not provided.

Often the question arises which perforator interskol is better. To get a good product, this list was compiled. The list includes the best models. Products are characterized by reliability and quality.