Best vices in 2020

Sometimes it is necessary to process a part by means of a powerful impact on it. For example, cut an iron bar with a grinder. To do this, you must first firmly fix it in one place for more efficient work. The best grips in 2020 can handle this challenge. Such devices are usually used in many areas of life: jewelry, carpentry, locksmith and automobile workshops.

Any self-respecting owner has a quality vice in the garage or in the country. If this is not the case, then you need to solve this problem as soon as possible and purchase a good model. Many are wondering which vise is best to choose, as well as what to look for. The answers can be found in this article.

Best Steel Vise in 2020

Wilton Q75 75 × 80 mm

First of all, we propose to consider an interesting model that is great for drilling. This option can be used both in industrial production and in your garage at home. The product is installed on the bed using four slots. The length of each is 6 centimeters. Special spikes are inserted into them.

The frame has special slots to facilitate precise object placement. The vise is 7.5 centimeters wide. This is enough to fix a square, plate or short pipe.

Pros:

• Low weight relative to other models. Only 2 kilograms;
• The cost is around 1000 rubles;
• The width of the vice is almost 8 centimeters;
• Compact handle for clamping, which does not interfere when working with an object;
• On the surface of the clamping jaws, notches are made for a tighter clamping;
• You can cool the tool with water as it is made of stainless steel.

Minuses:

• There is a slight backlash in the moving lip that is difficult to eliminate;
• There is no limiter;
• There are many burrs on the casting.

Russia 140 18667

As the name implies, the next option is produced in Russia and is aimed at the domestic market. Experts point out that this model is ideal for car services. The main feature is a reliable and durable construction, which allows the tool to effectively serve for many years. As a material in the manufacture, steel of the S35L marking is used.

The clamping width is 14 centimeters, which is almost 2 times more than in the previous version. Such a tool allows you to tightly grip the channel, the hub and other massive parts. On the lateral ends of the rod, rubber pads are provided, which increase the safety of the user.

Pros:

• The surface of the jaws has a corrugated structure, which increases the clamping density;
• Small size that allows you to place the device on a table;
• Nice color;
• A reliable bushing is provided on the main working shaft;
• U-shape, which is great for most parts;
• Three-point mount.

Minuses:

• Anvil is missing;
• High cost from 6 thousand rubles;
• Large weight of 15 kg, which does not allow placing the product on a regular table. You need a specialized workbench. It is also difficult to transport.

RIDGID 25 40100

The next model is for clamping pipes.They can accommodate a pipe with a diameter of 6 millimeters to 10 centimeters. You can quickly place and retrieve an object by flipping the top of the hook-shaped product. The screw is only needed for a firm hold when the pipe is already in the tool.

Pros:

• Robust construction with side reinforcements;
• Stroke from 0.6 to 10 cm;
• Quick extraction of the pipe from the tool using the convertible top;
• Plates are made of alloy steel;
• Reliable and tight coverage;
• Limiters are provided at the ends.

Minuses:

• You cannot turn the body;
• Extremely high cost from 25 thousand rubles.

Wilton WWV / 175 65017EU

Another Wilton model that will be covered in this list is the WWV / 175 65017EU. Typically, such a tool is used in carpentry shops. It is excellent for cutting thick cants as it has a width of 21 centimeters. In this case, the height of the sponges is 7 centimeters. This distributes the load evenly enough not to harm the wood.

The structure has special holes that are necessary for installing the product on the table. In addition to the screw, 2 additional stainless steel guides are implemented here. They enhance the device.

Pros:

• The screw is made of thick cast iron;
• The product is made of materials that cannot corrode;
• The shaft has a fine thread, which makes the stroke smoother;
• The small dimensions of the product make it possible to place it on a small table;
• There are no notches on the lips. This is done in order not to damage the pressed object;
• Good spreading width.

Minuses:

• Do not rotate the product;
• There is no clear parallelism;
• The cost is from 4 thousand rubles.

SPARTA 186255

If you need a budget, uncomplicated vice for working in your garage, then you should pay attention to the model SPARTA 186255. The width of the breeding is 12.5 centimeters. This allows most wide parts to be machined as well as many types of work on them. Moreover, a comfortable anvil is provided here.

The main feature of this design is its superior strength. There is reinforcing molding along the entire perimeter of the structure. Thus, this model will serve the master for many years with maximum efficiency.

Pros:

• Compact dimensions that allow placing the product on the table;
• High clamping power;
• The presence of four holes for tight fastening;
• Budget cost in the region of 1800 rubles;
• The presence of an anvil;
• The jaws have a grooved surface that will not allow the object to slip out;
• Impressive depth of the lips, which allows you to grip massive objects;
• Most parts in the assembly are stainless;
• Attractive design with pleasant coloration.

Minuses:

• It is not recommended to tighten the object too tightly, as it may crack;
• Large mass. Must be placed on a sturdy table or workbench.

Triton SJA100E TR281928

The next model can be called a novelty. It appeared in 2017 and has already taken a strong position in the domestic market. The main feature of this vise is the spreading width. They can even open up to the width of the door. If you need to clamp a massive object and other options are not suitable, then this is the best choice.

The screw is missing here. The mechanism works on the principle of a foot drive. In this case, the sponges themselves can be spread with your hands if you loosen the mechanism. This is convenient because you do not need to loosen the screw for a long time.

Pros:

• Massive sponges;
• Durable body;
• Maximum load - 200 kilograms;
• The presence of legs for installation on a horizontal surface. In this regard, a table is not needed;
• The breeding width is almost a meter;
• The legs themselves can be folded compactly;
• You can turn the product in any direction.

Minuses:

• The device weighs 14.5 kilograms, which complicates transportation;
• High cost from 9.5 thousand rubles.

ZUBR Expert 32731-175

Next in line is the ZUBR Expert carpentry vice.Manufacturers were able to achieve excellent quality at a pleasant and affordable price. This model is intended for fixing wood. It is noteworthy that the screw has a trapezoidal thread. Thus, the fastening efficiency is increased as well as the durability of the material. For a smoother and more correct clamping, two stainless steel guides are made.

The product can be tightly fixed on the workbench with hardware. It is worth noting that the manufacturer has provided 2 small holes on the sponges. They are needed if the user wants to install overlays on them.

Pros:

• The jaws and screw have no backlash. The stroke is smooth and even;
• The width of the sponges is almost 20 centimeters;
• Versatility;
• The screw belongs to the category of quick-clamping.

Minuses:

• There is too much grease on parts that gets onto the object.

Kobalt 246-012

Kobalt 246-012 is a quality rotary vise that works in two planes: horizontal and vertical. In addition to good quality and efficiency, the manufacturer paid attention to the appearance, creating an attractive design. The jaws and screw are made of durable stainless steel. In this case, the jaws can be replaced if necessary.

The product is equipped with a percussion anvil. It does not have such a large area, but most modern vices do not have such a module at all. Attachment to the workbench is carried out with 4 screws or screws. Their length should be 8 mm. The main drawback of this model is the uncomfortable and fragile handle, which is inconvenient to work with.

Pros:

• Durable jaws and screw made of stainless steel;
• Impressive stroke width;
• Attractive design and pleasant coloring;
• You can work in two planes.

Minuses:

• Inconvenient and fragile handle.

Zubr 32611-2 2438

The next model is designed to work with pipes. It is manufactured by the Zubr company. The first model allows you to tightly fix pipes with diameters ranging from 5 - 9 centimeters. The body is made of steel, which is protected against corrosion by a special coating. The mass of such a product is about 5.62 kg. Thus, it can be easily transported. However, for effective operation, you need to fix the device to a table or workbench.

The sponges are also made of durable material, and their surface is embossed. This allows the pipes to be clamped with maximum reliability.

pros:

• Effective pipe fixation;
• Low cost;
• Reliable build from quality materials;
• Comfortable and secure grip.

Minuses:

• Narrowness;
• Lack of features.

Zubr 32712-100

Another product from Zubr is next in line, but this time not for pipe fixing. This model is versatile and suitable for many workpieces. The manufacturer uses cast iron marked SCH-25 as the main material for the manufacture of such a tool. The surface of the jaws has a corrugated surface.

The basic kit includes additional elements for changing. The base can be rotated horizontally. Thus, the master can fix the workpiece in the most comfortable position. To accurately measure the distance between the jaws, a special scale is used on the body. A small anvil area is provided.

Pros:

• Compact dimensions;
• The presence of a measuring scale for accurate calculations;
• The manufacturer has ensured a smooth and even run without backlash;
• Budgetary cost.

Minuses:

• Inconvenient little handle;
• Casting is of poor quality.

WEDO TSCH-180

The following vise is for locksmithing. Their production has been established with the cooperation of specialists from Russia and Belarus. The base is made of cast iron and the sponges are made of steel. Experts note the excellent build quality. Moreover, the cost is quite acceptable. It is worth noting the increased stability of the device. It can be operated even without being fixed to a table or workbench. At the same time, comfort and efficiency are not lost.

Many users and professionals recommend this particular vice because it is versatile, has a good working stroke, low weight, and great stability.

Pros:

• Reliable sponges that will serve the master for many years;
• The clamping mechanism can be easily rotated horizontally;
• Durable cast iron and steel;
• The entire structure can also be rotated 360 degrees.

Minuses:

• Not the most pleasant appearance. However, this is not so important in the case of a vice.

Enkor 20081

The last model to be considered in this list is the Enkor 20081. It should be noted right away that this is an expensive product and not everyone can afford it. However, the price is fully justified. For this money, the buyer gets a high-quality and reliable device with an attractive appearance, which will cope with its tasks "one hundred percent".

The main feature of this design is the ability to move the workpiece after it is clamped. For this, 2 additional handles are provided here. Clamping occurs with three screws at once. Thus, the developer completely got rid of backlash. The product itself is fixed on a table or workbench using 7 mounting holes and bolts or self-tapping screws.

Pros:

• Impressive functionality in terms of adjustments;
• No backlash;
• You can move an already fixed part;
• Simple and easy to use.

Minuses:

• High price;
• The workmanship is a bit rough.

Recommendations for the selection of quality vices

Most vices have roughly the same design. They can vary in jaw width and height, travel, material and so on. Most of the factors you need to pay attention to if you want to purchase the most suitable option for yourself. Typically, the vise is made from steel or cast iron. Sometimes you can find a combination of these materials. Wooden structures are rarely seen. But they are less promising and it is not advisable to buy them.

It is worth paying attention to the purpose of the vice. They can be designed not only for different types of work, but also for different materials. Some are designed for massive metal objects, some are suitable for wooden beams. It is not recommended to buy a vise for metal and use it with wood.

It is recommended to take into account the weight of the product as well as its dimensions. You must be sure that you can transport such a device and that there is a suitable table or workbench for it. If you often have to carry a vice with you, then you should pay attention to small models with a small mass. If they are permanently fixed in the garage, then the weight does not matter.

Some models have additional options that make working in a vice more comfortable and functional. For example, many models can be rotated 360 degrees. There can be a whole variety of such functions, it all depends on the imagination of manufacturers and the range in stores.