The technical characteristics of circular saws are closely related to what diameter the saw blade will be. In fact, the larger it is, the better the engine power should be. It is important to pay attention to the complexity of the tool design as well as its weight. After reading our article to the end, you will understand which is the best circular saw of 2020. We present to your attention the ratings of the best models, which sections according to the cutting depth.
In addition, the performance indicators of the instruments are taken into account. Please note that the rating of the best includes models that customers like and appreciated by experts.
Please note that the TOP is not of advertising value, like the entire article presented. They were created for the purpose of familiarization. We do not seek to force you to buy products. The choice is always entirely yours.
Content
Mini Circular Saw
Such tools will be useful if you need to do simple work. They are mainly used for finishing materials. Such models will be appropriate for craftsmen who travel to the site or for stationary use. Manufacturers supplement the units with special cases. And convenient for transportation is that even the best circular saw in this segment will have a compact size.
Einhell TC-CS 860 Kit
If you need a circular saw, which model is better will be able to interest every buyer. Our TOP opens the option for thin materials. For example, he is able to cope with wood, plastic, ceramics. The complete set from the manufacturer is represented by a set of 3 discs. They all have teeth and a corresponding structure.
A good circular saw for wood will sit comfortably in the hand of the master. The manufacturer thought about this point by making the handle in the form of a curved shape. It is equipped with rubber stops, both at the bottom and at the top. There is a power button located on the side of the device. The shutdown option is supported. To do this, press on the tip with one touch.
You can work with the tool, both in the case of the need to cut slabs and boards, and longitudinally, performing long cuts. In the latter case, a side limiter with a scale will be useful. It will keep the performance of a flat surface.
The motor's characteristics are decent - 450 W, while the device is quite quiet. The pluses of the model also include the ability to perform submersible actions. This is possible due to a certain disc stroke. But with the help of a nozzle for a vacuum cleaner, you can ensure a minimum amount of chips during operation.
The main advantages
- the body is made of metal;
- the package contains a case for a saw and additional elements;
- weight no more than 2 kg;
- acceptability in price - 5 thousand rubles on average in the domestic market;
- able to process non-ferrous metals;
- it is convenient to work with one hand for the master;
- equipped with an overload protection option;
- the rotation speed is in the region of 6 thousand revolutions in 60 seconds.
Main disadvantages
- short wire - 2.3 m;
- rpm cannot be adjusted;
- a decrease in speed is observed when working with a dense material surface;
- the start is on the right side, it is inconvenient for left-handers;
- there is no soft start option;
- disc in diameter 85 mm.
Plunge-cut circular saw
When choosing which circular saw is better to buy, pay attention to the versatile tool. He is able to start sawing from the workpiece, or rather its center. Those. it allows you to make through holes in it. In the event that it is necessary to carry out just such a segment of work, then take a closer look at the indicated TOP below.
Makita SP6000 Set
Saw from the professional segment. Allows you to adjust the depth, as well as change the desired cutting angle. A disc is used for work 165x20 cm. The depth of the cut is 56 cm, and the inclination by 45 degrees is 40 mm.
The tool can be used to work on walls or floors. The cut can be made at a distance of 18 mm. It should be noted that such a device is suitable for installers who assemble furniture. The thing is that it is distinguished by high accuracy and good cut quality.
The main advantages
- complete electronic content at the level;
- engine braking option;
- it is possible to adjust the speed;
- there is a soft start option;
- equipped with overheating protection;
- quality matches the price;
- engine power characteristics - 1.3 kW.
Main disadvantages
- weak outsole characteristics. If the saw falls or gets caught strongly, the mount may fall off. It is supplemented with 4 self-tapping screws;
- good circular saw blades are worth looking for. It is better to take the set together, paying attention to the fact that the course is smooth;
- the application is mostly designed for carpentry purposes, but when sawing hard wood, it will not please the result.
ELITECH PD1255P14
A device for precise work is suitable. The complete set includes a guide blade, as well as clamps. All this will allow the tool to work on the treated surface. You can also make cuts in the targeted area. This is especially useful in the case of symmetrical work.
In size, it is a compact device. The handle is long. As a result, the unit can be used with 1 hand. The upper part of the device is covered with rubber stripes. A second supporting handle is also available.
The engine is equipped. According to the power characteristics, it is 1200 W. This is enough to cope with different types of materials. There is a special outlet where you can connect a vacuum cleaner.
The main advantages
- the casing is made of durable metal;
- a disc of 160 mm in diameter, which is sufficient for making cuts in a depth of 55 mm and 41 mm at an angle;
- no backlash was noticed in the main attachment points;
- the shafts rotate in the area of the bearings;
- the body is compact in size;
- disk size is often found on the market, if necessary, it can be easily replaced;
- 5500 rpm is enough to get the job done.
Main disadvantages
- high price in the region of 11 thousand rubles;
- there is no rubber coating on the second handle;
- weight 4.8 kg, which is uncomfortable for long-term work;
- there is no brake disc;
- the splice of tires may detect a gap that needs trimming;
- 2 m of cord, which is uncomfortable when moving in work;
- the revolutions are floating, if you change the type of load;
- lack of a smooth start;
- an uneven sole comes across.
Bosch GKT 55 GCE
This tool belongs to the category of professional. It has an excellent set of options, both primary and secondary. Here it will be appropriate to indicate the possibility of a soft start, a system for supporting the speed during operation, as well as adjusting their number. Conveniently, this saw allows you to make a cut, both at an angle and in perpendicular variation.
The tool manufacturer is a German company. The build quality and structural elements are top notch. The Germans did not fail this time either.
It is a very good model with great speed, excellent accuracy and ease of use. Everyone who has dealt with the tool notes that they can recommend it for purchase.
The main advantages
- the cut is even, clean;
- the rulers for adjusting the cutting depth and the angle of inclination are set as accurately as possible;
- if the instrument is registered in accordance with the serial code on the manufacturer's website, the warranty for it will be up to 3 years;
- tires from other manufacturers can be applied successfully.
Main disadvantages
- you will have to buy guide rails, since it is inconvenient to work without them. Sizes should be 800, 1600 and 1100, and it is better to pay attention to new elements;
- angle adjustment is not accurate;
- the price is high. It will pay off if you use the tool professionally.
Circular saws with a cutting depth of 70-85 mm
A cut with 70 mm in use in everyday life is not appropriate. Therefore, this segment of products is professional. But what kind of saw you need in your case should be chosen, relying on the main production tasks.
Makita 5008MG
A good saw, which, when tilted at 57 degrees, has a 210x30 mm working disc. Cuts 57 mm and 75.5 mm. The engine produces 1800 watts, which allows the instrument to function confidently. The saw blade is capable of reaching 5200 revolutions in 60 seconds. The saw runs smoothly, there are no jerks during the process, while the high power makes itself felt immediately.
In general, customers are satisfied, they note that the saw is a universal saw with good power ratings. It can be classified as one of those tool options that take time to get used to. Suppose the racks are not securely fastened, and there is no smooth inclusion, but this is an accurate and powerful device.
The main advantages
- weight 4.8 kg;
- decent weight distribution;
- general indicators of ergonomics;
- you can work with one hand;
- the handle has rubber pads that allow you to hold the tool comfortably and confidently during operation.
Main disadvantages
- 2.5 m network cable;
- the parallel stop is springy;
- lack of a groove for movement in the case of a guide rail;
- the backlight automatically starts up when switched on, but it is not always necessary.
- it is difficult to inspect the working area, and all because some of the design features of the saw interfere.
Bosch GKS 190
The German manufacturer pleases with a circular plate from the professional segment. The disc spins at 5500 revolutions in 60 seconds. Equipped with a saw with a 1.4 kW motor. The depth of cut is 50 mm when tilted at 45 degrees, and 70 mm in the normal state. The tilt angle can be changed up to 50 degrees.
The cutting depth is enough if it is necessary to process the boards with manual circulars. If you need a little more, then remove the lower casing, install a 200 mm disc. The cutting depth will increase by up to 75 mm.
This tool will take the strain on a long-term basis. Its price is not small, and therefore it is better to buy a device for professional purposes.
The main advantages
- the cable is designed for 4 meters. This is a convenient solution from the manufacturer. The master will be able to move comfortably with the instrument in his hands, even if the room is large in area;
- the device weighs about 4.2 kg. This allows you to comfortably hold it in your hand, work vertically;
- disc speed at high rates will give a smooth clean cut. Users note that it does not always need processing.
Main disadvantages
- The 6-greenhouse, to clamp the disc, falls out of the mount equipped in the case. It is recommended to keep it separate;
- there is no smooth start;
- the collection of sawdust is not always correct. Chips can often fly out from under the knife;
- Finding a disc with a diameter of 190x30 mm is not always easy.
Circular saw with a cutting depth of 60-65 mm
This category of devices can be found both in household and professional lines of tools. True, in the first case, you should rely on special criteria.Please note that such tools have a high power, it will not be in demand for those situations when you have to make a couple of board cuts.
Makita 5477NB
The engine has an impressive 1.8 kW performance. This reduces the likelihood of the wheel getting stuck while it is operating. Discs are used to work with dimensions 185x15.8 mm, an adapter designed for 30 mm is also taken into account.
The saw model is convenient due to the fact that the engine itself is located along the cutting line. With an effort to move the device, less time is spent. The force on the shaft is carried out by means of a hypoid transmission.
Often, this tool is bought by those people who, on a professional basis, are engaged in the construction of frame houses or bought a saw to conduct private construction. But for household purposes it is better not to purchase it. Its price and power characteristics are painfully high, which will simply be superfluous.
The main advantages
- ease of use even with one hand;
- movement on the surface is comfortable. Good and reliable ergonomics;
- the power characteristics are high, but within the limits of the cutting depth, the saw is able to confidently process many materials;
- the view of the work surface is great. In the case of work, it is clearly possible to see the cutting line.
Main disadvantages
- when starting, the engine "tears" the saw forward, which is significantly felt by the master. The lack of smooth startup frustrates users;
- the saw weighs a lot, but it is felt during work;
- delivery does not include rip fence. Replacement can be carried out at the expense of the Svenson square;
- when used for roofing work, it is possible to feel that there are no fasteners. They could be used to hang the device from the beam during breaks;
- the retainer is fragile and may break.
AEG KS 66-2
A decent circular saw is presented to your attention, which can be useful for a wide range of carpentry work. It equips cuts of 47 and 64 mm when the blade is positioned at an angle of 40 and 90 degrees in relation to the surface. This saw is determined by 1.6 kW of engine power, as well as 5800 disk revolutions in 1 minute.
Ergonomic features are at a high level. The shape of the handle corresponds to the anatomical shape of the hand, and therefore it is convenient to work with the saw. Due to the use of rubberized coating, the tool is held comfortably and confidently. The build quality is top-notch, and the power characteristics are sufficient to handle materials up to 65mm thick.
The range is set to a floor angle of 56 degrees large. The position of the disc can be easily adjusted by means of a thumbscrew equipped with high-value stoppers.
Analyzing consumer reviews on the Web, it became clear that this device can be used for semi-professional and household tasks. It will be useful in those situations when from time to time you need to file something, while in a hurry.
The main advantages
- ergonomics indicators;
- lack of backlash on the body and adjusting elements;
- high characteristics of engine power;
- power cord 4 meters, which is convenient for a number of different jobs.
Main disadvantages
- equipped with stiffening ribs "flimsy" sole. This decision is somewhat unexpected. But this will be enough for the saw to function at high power. There were no complaints about breakage in the reviews;
- the lack of a soft start is strongly felt when the engine is started up;
- the tool works for 15 minutes, after 10 minutes it needs to be allowed to rest. It's still a household saw.
DeWALT DWE 560
The saw weighs 3.7 kg and has 1.35 kW of engine power, which is a decent combination. The disc rotates at 5500 per minute. The device can be a good helper if you need to perform carpentry tasks, while the thickness of the material will be in the region of 65 mm.
The package bundle is represented by a high-quality disc.As the experience of buyers shows, it can last long enough. He even manages to handle nails, although there is a catch - many of them are made on the basis of mild steel.
Overall, the device is noteworthy. It was able to combine good performance characteristics and prices. The weight is small, and therefore the saw can be used for semi-professional and domestic purposes. In general, buyers recommend the device for purchase.
The main advantages
- due to its low weight, working with the tool is comfortable. Even if you keep the device suspended, your hand will not get tired;
- the assembly is of good quality, as are the materials used to make it. There is no smell of plastic, no backlash was found;
- the design is well thought out. There is a blowing of the working area and removal of sawdust;
- the length of the cord is about 3.5 m. This is enough if you need to move around the site during work.
Main disadvantages
- if you need to purchase accessories or spare parts, difficulties may arise. For example, the disc size is 184 mm, which is not the best deal on the market;
- the flag is used to change the cutting depth. According to the wing screws, this is not the best option;
- keep in mind that when working, it is better to double-check with a square, what is the marking of the inclination of the disc.
Cordless Circular Saws
The tool is used in the case of field activities. It will help to remain independent of the extension cord or the location of the outlets. With its help, you can block the roof, carry out construction work in the attic, where there are no better options for connecting carriers.
Bosch GKS 12 V-LI
A professional saw that is required by a master who is engaged in floor processing. Using the device, you can cut laminate, plywood, parquet or PVC boards. The saw is made in accordance with the pistol shape. Rubberized handle. Management is carried out by one hand. It is quite convenient, because the device weighs 1.4 kg.
The design is compact. It is easy for her to perform various manipulations, even if the space is limited. Changing the angle of inclination of the base plate is possible due to the screw from the end part. The cut in depth will be 26 mm.
Works with a 12V battery, the power characteristics will be quite acceptable. The 45 degree tilt angle allows you to cut boards up to 17 mm thick. There is a battery in the kit, it is designed for 2 A / h, which allows you to work with the device for a long time.
The main advantages
- the complete set is represented by 2 batteries;
- there is a convenient suitcase for transportation;
- the device operates at 1400 rpm;
- length 279 mm;
- available dust extraction adapter, as well as guide rail mount;
- fast charging capability;
- there is a backlight for the work area.
Main disadvantages
- the price is in the region of 12 thousand rubles, which not all our compatriots can afford;
- lack of rotation speed adjustment;
- discs for metal are not commercially available, mostly only for wood.
DEWALT DCS576N
This is a great option for long term work. It does not include brushes in the package, and therefore the heating of the device is minimal. And the care of the optional part does not require much effort. The rubber coated handles stop slipping even if your hands are sweaty.
The battery is taken out to the end of the handle. He is able to provide an optimal balance. There is also a mushroom-shaped handle. It allows you to direct the course. But the angle of inclination of the platform is carried out not by a screw, but by rearranging the groove. This speeds up the process 3 times faster. The pluses include the key mounts in the body area, this gives instant access to changing the saw equipment. The 45 degree angle of the saw allows for a 43 mm depth cut.
The main advantages
- stylish design;
- steel coating;
- there is a slot for a finger with a trigger;
- the start button is fixed;
- light weight.
The main cons
- the price is around 15 thousand rubles;
- no charger and battery included;
- turns are not regulated;
- delivery in a box.