It is quite rare today to see when the master uses rollers and brushes when repairing a car or performing finishing work on a room. These tools are gradually falling out of use. There are many reasons for this. Take, for example, the fact that a layer of paint with a smooth and uniform surface cannot be provided with their help. But the demand for a spray gun is growing every year. Back in the days of the USSR, many car owners tried to paint them by spraying.
The task of painting ceilings and walls is no exception. Often, the main assistant was a vacuum cleaner. Today, the market for tools is presented in a wide variety. That is why we decided to help you choose the best spray gun in 2020. The TOP of today's topical tools, as well as spray gun manufacturers, will be useful in this task. Please note that there is room for selection criteria in the article.
Purchase features
Before proceeding to the ratings, it is worth deciding on a number of criteria that you need to rely on if you want to buy a good spray gun for your home or car. This will be discussed right now!
So, first it is worth understanding the design features of the device. Pneumatic spray guns have the best spraying properties. You just need to take into account that for their purchase it is worth taking care of the presence of a source of compressed air. If at large enterprises there are no problems with this, then for home use you will have to purchase a compressor.
The best electric spray gun is a less expensive purchase. If you pay attention to the premium segment, then such models can compete with pneumatic design by 100 percent.
If the device is planned to be used globally, then it is necessary that the complete set contains replaceable nozzles, additional type sprayers. Such elements are produced in different diameters. They can be up to 7 mm. When choosing, it is also worth relying on the viscosity of the material to be sprayed. If it is less viscous, then the nozzle should be thinner. As a result, the spray quality will be higher.
When choosing which spray gun is better for painting, keep in mind that it should be convenient to work with it. In this case, it is worth relying on dimensions and weight. If this data is less, then it will be much more convenient to wield the tool.
As for paint tanks, their capacity, as a rule, is determined by manufacturers up to 1 liter. They are available in materials such as nylon or plastic. Installation is provided from the top of the structure. If the indicators of the containers are higher than 1 liter, then, most likely, the manufacturer has equipped them with metal. The mount in this case will be with the lower part of the structure.
TOP firms
Studying in more detail the question of which spray gun is better to buy, you should pay attention to the fact that manufacturers are popular in the market today. There are really many firms that specialize in these products. The assortment is presented in a wide variety.There are different proposals, among them there are those that are recommended to pay attention to when choosing a spray gun.
We have compiled the TOP manufacturers who have been able to establish themselves in the market on the positive side. Among them there are young brands, as well as those that have been known for a long time.
When compiling the TOP, such data as the opinion of consumers and experts were taken into account. We will not dwell on the description of the companies in more detail, but will only indicate their names. Most likely, many of them were on your hearing, and some of the brands will become a wonder.
The list of manufacturers whose assortment is worth paying attention to, if you choose which spray gun is best for your home to buy, includes the following companies:
- Specialist;
- Energomash;
- Caliber;
- Bison;
- Sturm.
After analyzing the information on the Web, we concluded that our compatriots are interested in tools, both domestic brands and foreign manufacturers.
Please note that although the brand belongs to the Russian Federation or other European countries, many production facilities are located in the territories of East Asia. Often, the bases are located in China.
The best spray guns for painting: TOP
When compiling the rating, we analyzed the reviews of independent users who shared their opinions on the Web on the purchase of a spray gun. Please note that the TOP is not of advertising value, like the entire article. They were created to familiarize readers. We do not seek to force you to buy products. The choice is always entirely yours.
In addition to customer reviews, we took into account such criteria as pricing policy, the opinion of professionals, studied the technical parameters and design features of spray guns.
The rating includes both cheap tools and expensive ones, full of high performance characteristics, reliability and options. Well, let's start getting to know the TOP positions right now!
HAMMER PRZ110
According to the combination of quality characteristics and the price set by the manufacturer, this spray gun option is one of the best. If we turn to the cost, then it varies around 2400 rubles. The manufacturer is a Chinese brand that doesn’t overprice, nor does it boast outstanding power capabilities. The parameters are around 110 W.
In fact, we are bringing to your attention a rare type of electric-type spray gun, which has good functioning parameters. The device works at the limit of its capabilities, you can't argue with that.
In the case of the nominal mode, the consumption of material for painting can be 0.3 liters in 60 seconds. Experts agree that these figures are really worthy for the budget proposal. It is also worth characterizing the viscosity indicators. At the maximum, it can reach up to 120 dyn⋅sec / cm². This makes it possible to work with both thick enamel and varnish.
This is not the end of the performance indicators. The tool is used in carpentry. For example, if you need to restore furniture. Only there are some nuances. They consist in the fact that it is not possible to change the type of spraying, which is circular. For this reason, do not even think about subtle manipulations, armed with this spray gun model. Although, as the experience of risky owners shows, there is a way out. For example, you can see a regular spray on a model with adjustment.
WAGNER CONTROL PRO 350 M AIRLESS
If the goal is to understand which is the best professional spray gun, you can pay attention to the offer from a German manufacturer. This model is expensive. Its price varies around 55 thousand rubles. The reliability indicators are really high, and therefore it is not surprising that flattering reviews about the tool are often found on the web.
This is a high-quality option that will allow you to use a spray gun to provide professional painting services for premises in the case of a forced mode of operation. The model will become appropriate for equipping production. Its power characteristics are impressive at 600 watts. In this case, the device generates streams of compressed air. The pressure is 110 bar maximum during operation. You can also adjust the spray liquid flow rate. Indicators are 1.5 liters in 60 seconds. In this case, the average values of the application rate will be equal to 7.5 sq. M. in 1 minute.
The model is distinguished by a complete set with a 15 m connecting hose. Due to it, you can quickly and efficiently paint rooms with a large area. In this case, it is better to place the instrument in the central part.
But all the same, this unit cannot be perfect in everything. Users note that it is really very noisy when working. Sometimes, the indicators reach 100 dB. But in order to eradicate the minus, it is worth using construction headphones.
BORT BFP-280
When choosing which spray gun is better, pay attention to this inexpensive model. According to the characteristics of the balance, it is optimal. The price is set in the region of 2900 rubles. A Chinese company specializes in the release of this spray gun. The model is suitable for home use. Power ratings are really high. This is due to the presence of a built-in electric motor, as well as the fact that the spray gun is lightweight.
Powered by a 280 W network, while the indicators are quite economical. Spraying is carried out with 200 ml every minute. The spray gun is not capable of more than this. This is due to the fact that the opening of the nozzle makes it possible to process only small areas. This allows you to increase the quality of the applied layer to the surface.
In general, each owner can change the spray pattern. It can be both horizontal and vertical coloring. And no one canceled the circular. In general, the spray gun is designed to be combined with materials of varying viscosity, ranging from thick enamels and varnishes.
According to its characteristics, this model deserves attention. There is a 700 ml liquid reservoir. It is equipped in the lower section of the structure.
Summing up the model, I would like to note that a good tool is presented to your attention. He receives a lot of support from those people who have collaborated with him. Buyers recommend it for consideration when choosing a spray gun from the budget segment.
WAGNER PROJECTPRO119
In accordance with the best qualities of a professional device, we have included this spray gun in the rating. The manufacturer is a German company. The price of the device corresponds to the professional line - 58 thousand rubles. In fact, the German company is distinguished by the release of quality goods, regardless of what the budget is.
The main emphasis in the development of the device was placed on user-friendliness. The tool is equipped with a trolley with wheels. In this case, there is a suction pipe system. There is a 15 m connecting hose, which is convenient for processing large areas.
The manufacturer has added a particle filter to the spray gun, even if the need for its use seems questionable to some consumers. It is also important to mention the power indicators - 720 watts. The engine is commendable, it is very efficient.
Turning a blind eye to the high technical specifications, it is worth noting that the overall price of the device is high. The margin in this case is related to the popularity of the manufacturer's brand. This is the main disadvantage of the proposal, since not everyone can afford such an expensive purchase.
PATRIOT SG 110
The electric spray gun is produced by a Canadian company. In fact, in this TOP, this option is the most budgetary. The cost of the spray gun is around 2,100 rubles. It is intended for work in the area of small areas.
The manufacturer promises that the device will work at high speed, and it works as quickly as possible. Only the engine is set to 110 watts. This delivers 300 ml productivity in 1 minute. In fact, the engine in this model is really weak, and therefore we will not praise it.
The same cannot be said about the brand's decision to provide a spray gun with a quality housing. The build is decent. The tool is made of plastic with impact-resistant characteristics. It is lightweight. The material is able to withstand an awkward drop on the coating, even if it is hard, and the height in the area of human growth.
The manufacturing company has equipped a handle with pads that have non-slip characteristics. This makes the grip comfortable. This has a positive effect in those situations where there is a long work ahead.
The buyer will also be pleased with the presence of an extension cord with flexible properties. It can be used when it is worth painting places that are not easy to get to. In fact, this model has a number of advantages, and therefore it is not for nothing that it entered the rating offered to your attention.
ASPRO-1800
The model is in great demand on the market, but it has a lot of contradictions. Its problem is that the filling is very powerful, but debugging is lame. A Chinese brand is engaged in production. The cost of the offer varies around 39 thousand rubles. In terms of power characteristics, the engine is impressive - 900 W, while the performance is provided by 1.8 liters of material (paint, varnish) in 60 seconds. Even if it seems that this is a decent return, but with such an engine, much more efficiency could be squeezed out.
As for the constructive solution, this option has been thought out 100 percent. It is convenient to work with a spray gun. The body is equipped with a stand that can be dragged if necessary. The complete set is represented by a 15 m long hose. This is very convenient, in particular, when it is necessary to paint a large room or work on ceilings.
WESTER FPG-30
A pneumatic type spray gun costs around 3100 rubles on the market. It should be noted that the device is manufactured in China, but the company belongs to our compatriots.
This offer was included in the rating as one of the best, where the cost and quality indicators of the tool are perfectly combined. You can work with it in any production environment. The construction is made on the basis of anti-corrosion steel, which is a kind of plus. It is completed with a nylon barrel. Its capacity is 600 ml.
This tool is capable of working with primers, paints and viscous varnishes. The pressure is in the region of 2-3.5 bar, which allows this. The viscous formulations pass through a 1.5 ml nozzle. In 1 minute, you can process 85-100 liters.
With such a tool, it will not be difficult to paint a car, and decorate the room inside.
ZUBR KPI-350
The domestic brand ZUBR offers an inexpensive spray gun, the price of which varies within 2,000 rubles, but with excellent power ratings of 350W. It should be noted that although the brand is Russian, production bases are located in the PRC.
This is a standard spray gun model, but it copes with its main tasks at the highest level. She manages to perfectly spray various types of varnish and paint coatings, the viscosity of which reaches no more than 60 DIN. As the experience of users shows, working with it is comfortable. The color is uniform, there is no overspray. Unlike competitors' models, this spray gun is able to provide its owner with autonomous operation without failures during the painting cycle, as well as excellent traction. In this case, the total duration of the process has no particular effect.
The HVLP system is responsible for spraying economically. It has a pronounced large spray head and low pumping pressure.
The special characteristics do not end there. The jet of paint can be fed both horizontally and vertically.This fact will vary due to the position of the rotary nozzle, which is made to ensure the convenience of using the spray gun.
In fact, buyers are really happy with their choice. For this reason, on the Web, you can find many recommendations on how to buy this particular model from ZUBR.
PATRIOT LV 500
The spray gun is pneumatic. It is marketed by a Canadian firm. The tool is made in accordance with the best standards of classic painting equipment. Its cost is quite acceptable - 4400 rubles on average. Those. if we take this indicator and quality characteristics, then this is an excellent offer for today.
The manufacturer has worried about a high-quality assembly. The model of the spray gun is beautiful in appearance, all the regulatory elements, the hose line, the trigger are made on the basis of a material that is resistant to corrosion. It is convenient to work with the tool. The gun fits well in the hand of the master, does not slip when painting, and is comfortable in weight, and therefore the brush will not be overloaded.
In fact, everything is not so smooth. Upsets the tank under the material. If work is carried out at a slight minus temperature or a minor blow is made, the plastic will become brittle. As a result, the tightness will be broken, chips, cracks will appear, and in general the structure may collapse. You can eliminate this minus, it is worth replacing the tank. But again, this decision can hit the budget.
CALIBER ADB-850
The airless paint sprayer is produced by a Russian brand, which surprises with the good performance of the device - 2.1 liters in 60 seconds. In this case, the engine operates at a power of 850 W.
It is also important to note the price of a professional tool - it varies around 36,400 rubles. Buyers note that for this money you can buy a "tank", which will be incredibly useful in the case of painting work. A single-phase collector motor is built into the unit. A high pressure of 227 bar appears when spraying. The device itself is economical. The liquid is crushed as it passes through the nozzles. It turns out that a large area of the surface falls under the color.
In fact, this professional spray gun model costs an order of magnitude higher than cheap counterparts. The assembly is of high quality, the Russian brand did not save on materials. And, as the analysis of reviews on the Web shows, the buyers of the tool model did not find any drawbacks in it during use.
SATA 100 BP
The tool is manufactured by a German brand. For a long time, the brand has managed to maintain its leadership position in the market. The cost of this pneumatic device is about 16 thousand rubles.
Suitable for spraying thick, viscous structures, water-based lacquer surfaces. In this case, the dimensions of the area will not matter much. The tool has excellent performance of adjusting elements that allow you to change the material consumption. The spray width can be adjusted.
The manufacturer has equipped a plastic handle, but the material is lightweight. But the compositions are poured into a tank, which is made on the basis of steel with anti-corrosion elements. It is made in the form of a thin-walled flask. This version of the spray gun is worthy of attention. But keep in mind that the price is too high, and therefore all ordinary consumers will not be able to afford such a purchase. If the budget allows, then you should not refuse this purchase.
BLACK + DECKER HVLP400
This spray gun has a large tank volume where materials for spraying are poured. It is designed for 1.2 liters. The device itself is really bulky. He has a hose 6 m long, a 450 W engine, and the flow rate varies around half a liter in 60 seconds. In principle, the manufacturer was able to create all the necessary conditions for the painting work to be carried out continuously and comfortably.
Experts and lay people alike agree that this tool is good. A special highlight is the speed indicator, which notifies of the consumption of material.It is installed on the body of the spray gun. In addition, the material spraying mechanism is also pleasing. It can be changed from horizontal to vertical circular. In general, this device will be appropriate for wall decoration, furniture, as well as car painting.
BOSCH PFS 5000 E
The German manufacturer Bosch is distinguished by the release of exceptionally high-quality products. This spray gun model was no exception, the engine of which was designed for 1200 watts. The cost of such a device is around 11 thousand rubles in the domestic market.
An excellent addition was the speed of paint application to the surface - half a liter in 60 seconds. The electric paint sprayer is suitable for treating walls, furniture surfaces, and can be used for cars. Glaze, enamel, varnish, stain, and other means for facing are used.
The company has paid particular attention to ergonomics. Installing the engine does not affect noise performance. They do not exceed more than 95 dB. In fact, this is a kind of achievement in this product segment, and therefore this tool deservedly entered the TOP.
But with the vibration level, everything is not so smooth - 2.5 m / s2, while the weight of the device is in the region of 5 kg, which is much higher than the standard.
ZUBR KPI-750
The manufacturer of the final TOP model of the spray gun is a Russian brand, but the main base is located in China. The cost of the instrument varies around 4,300 rubles. The main feature of this inexpensive option is the availability of a wide range of adjustment of the material supply intended for surface treatment. The tool is used for high-quality painting. The motor is rated at 750 watts, which is enough to get the job done quickly. The ejection of liquid in 1 minute is 800 ml. But keep in mind that there are certain requirements for the viscosity of the material. It should not be higher than 100 dyn⋅sec / cm². If this is not observed, the nozzle may become clogged and malfunction.
Vibration at minimum - 0.1 m / s2. At the same time, the mass of the apparatus is in the region of 4.8 kg. As for the noise, the indicators do not exceed 90 dB. In fact, there are much "louder" installations on the market, and therefore this disadvantage is peculiar.
This concludes the article. We hope that the material will be useful for you and will be useful in the future.
