The best motor drill in 2020 for excavation

For fast drilling of small holes in the soil or ice, motor-drills are used. They are powered by gasoline engines. Through the gearbox, the torque will be transmitted to the auger, which simultaneously makes a hole and throws earth or ice upward.

There are products of many domestic and foreign manufacturers on the market. The advice of experts makes it possible to make the right choice when purchasing a quality device. To choose the best motor drill in 2020, this rating was compiled, which included the best products.

How to choose a motor drill

The question often arises which motor-drill is better to buy. You need to familiarize yourself with the key characteristics:

  • Purpose of the device. Often this type of tool is used in 2 areas of activity. Builders and owners of country houses purchase motor-drills in order to install poles during the construction of greenhouses, swings or fences. When the soil is clayey, it is advisable to purchase a powerful device that is capable of making deep holes. Fans of winter fishing may find themselves in a difficult situation when the ice reaches 1 m in thickness. Only a gas drill makes it possible to make many holes with a diameter of 15-30 cm with the least effort.
  • Engine type. Gas drills available for the domestic consumer are equipped with various engines. The most productive and environmentally friendly are 4-stroke, where gasoline and oil are poured separately. For a 2-stroke engine, you will need to mix fuel and lubricant in a special canister in advance. 2-stroke units have a lower price, however, during operation, they emit a large number of harmful elements and generate a lot of noise.
  • Engine performance. Taking into account the tasks assigned to the gas drill, a certain engine power is required. To make deep wells in heavy soil, it is necessary to choose a device with a capacity of up to 8 liters. from. In the same period, a 2.0-3.5 liter engine is enough for fishermen to drill holes in ice 15-20 cm in diameter. from.
  • Rigging. Gas drills are available for purchase often without auger. Therefore, the equipment will need to be purchased additionally. To make the right choice, you need to know the fitting dimensions of the connection. The standard fit is 2 cm in diameter, but the most powerful motor drills can be larger (3.2 cm). Some developers complete their own products with adapters that allow using any augers.

To choose the optimal device, a rating of the best motor-drills was compiled. During the compilation of the list, expert opinion and customer characteristics were taken into account.

The best fishing motor drills

For those who love winter fishing, you should pay attention to the device's weight and dimensions. When using the auger with a diameter of 130-180 mm, high performance is not required from the motor.

ELITECH BM 52E

The best motor drill in 2020 for excavation

This model represents the optimal balance between adequate cost and proper performance. The advantages of the device include a standard connector, which makes it possible to use screws of various diameters.

The gasoline engine provides powerful torque. The device from the manufacturer from China is inferior in some indicators to the leading models, however, due to its small mass, it is easy to carry it along a frozen river or lake. With regard to the diameter of the holes, the basic set includes equipment with a diameter of 20 cm.The greatest drilling depth will reach 1.8 m.

Consumers note the adequate cost, low weight and efficient motor. In addition, the package contains a canister, tools, a funnel. There are complaints about the build quality.

Pros:

  • adequate cost;
  • small weight;
  • efficient engine;
  • standard connectors.

Minuses:

  • not too high-quality assembly.

RedVerg RD-EA630B

The best motor drill in 2020 for excavation

To catch large fish in winter, you need to pay attention to this product. A device that is equipped with a powerful 3 liter gasoline engine. with., can drill large holes (30 cm). Through such holes in the ice, you can easily pull out a bream or pike.

For comfort in operation, the product is equipped with shock-absorbing handle pads. Experts appreciate the power and performance of the gas drill, as well as the emergency braking system. The volume of the tank is large enough that it will make it possible to make many holes in the ice. Buyers discovered 1 drawback when using. The kickstarter rope may break during a cold start. In other aspects, the fishermen have no complaints about the motor-drill.

Pros:

  • increased productivity;
  • large holes;
  • anti-vibration handles;
  • emergency braking.

Minuses:

  • the kickstarter rope may break.

CHAMPION AG352

The best motor drill in 2020 for excavation

The product in question will be the lightest and most comfortable gas drill in this segment. The motor-drill is equipped with a 1.9 liter engine. with., there is enough torque to drill holes in a diameter of 60-250 mm. Only the auger must be selected with a landing diameter of 2 cm.

Experts point out a strong frame of the device, comfortable handles with shock-absorbing pads. One contains interface elements. Due to the presence of electric ignition and a diaphragm carburetor, the developer manages to achieve uninterrupted operation of the engine, as well as reduce the emission of harmful substances by 1/3.

Buyers note adequate cost, light weight and ease of use. The disadvantages include a low-power motor.

Pros:

  • adequate cost;
  • small weight;
  • shock absorbing pads;
  • environmental friendliness.

Minuses:

  • insufficient performance.

The best motor drills for earthwork

In order for the gas drill to cope with any soil, the device must have a productive motor. Since large holes are easier to make with two people, mass is not key.

Fubag FPB 71

The best motor drill in 2020 for excavation

These devices are highly popular among domestic buyers. Recently, the number of views of the gas drill card has increased significantly.

Adequate cost will be the main attractive factor. In addition, the gas drill is equipped with a high-quality 2-stroke engine. The model has universal qualities, suitable for drilling land and drilling ice.

The product is inferior to analogues in the diameter of the holes (up to 25 cm) and the greatest depth of the holes (80 cm). The cushioning pad of the handles will be a pleasant addition to the operation. Buyers also note the low weight of this technique (11 kg). Of the minuses, it should be noted low-quality plastic and insufficient fastening of the tank lid.

Pros:

  • acceptable cost;
  • good performance;
  • shock-absorbing handles;
  • versatility.

Minuses:

  • low quality of plastic parts;
  • shallow hole depth.

ADA instruments Ground Drill 14 Reverse

The best motor drill in 2020 for excavation

The device in question is designed specifically for professionals. Such a powerful device needs well-coordinated work of 2 people, therefore 4 handles are included in the package.

The motor-drill is equipped with a 4-stroke gasoline engine with good performance and a low amount of noise. The diameter of the holes in the soil is 60 cm. To prevent the equipment from getting stuck in the soil, the developer provides a reverse option. Due to the special design of the drive shaft, it is possible to attach standard augers (2 cm) to the device, as well as accessories with an increased landing size (3.2 cm).

Experts consider this device to be the best, despite the rather high cost. Buyers liked the technical performance of the gas drill, in contrast to the price of the device.

Pros:

  • increased productivity;
  • large diameter of the holes;
  • reverse;
  • 4-stroke motor.

Minuses:

  • overpriced.

ELITECH BM 70V

The best motor drill in 2020 for excavation

This device has a number of important qualities. These include acceptable cost, good productivity, decent drilling depth. The 2-stroke engine is fuel efficient (0.8 liters are burned per hour).

The diameter of the holes can be adjusted (the screw changes 40-300 mm). The product is equipped with a standard 2 cm connection. The 10 kg device can be operated by 1 or 2 people.

Experts distinguish an acceptable cost and high-quality assembly in a gas drill. As for the disadvantages, buyers highlight the short muffler nose, drying out of the seals on the canister and tank lids.

Pros:

  • adequate cost;
  • easy start;
  • comfort in use;
  • high quality build.

Minuses:

  • flaws in the design;
  • fragility of seals.

Hitachi DA 300 E

The best motor drill in 2020 for excavation

The best motor-drills for earthwork. They can make holes even in frozen soil. The device is intended for operation by 2 operators. The steel frame is made in the shape of a figure eight with square hinges.

The corners are covered with wide rubber pads that reduce vibration. The assembly provides for strong pressure and rapid drilling. During carrying, the handles can be easily detached using screws on the body, which will reduce the size of the gas drill by 3 times.

Pros:

  • tightly braided protected accelerator cable;
  • comfortable gas trigger;
  • performance;
  • capacious tank that will last for a long time;
  • screws can be installed in diameter up to 30 cm and length up to 200 cm;
  • endurance of the device, unpretentious to the conditions of use;
  • starts even at -20 degrees;
  • build quality;
  • Japanese motor.

Minuses:

  • high price;
  • there is no auger;
  • heavy weight;
  • gasoline and oil are mixed in certain proportions before refueling, otherwise the piston system deteriorates;
  • there is no reverse;
  • an ill-conceived exhaust pipe assembly is capable of directing the flow to the face.

CHAMPION AG364

The best motor drill in 2020 for excavation

A wide range of works makes it possible to make the device in question one of the best on a personal plot. This easy-to-use device is suitable for drilling holes in the soil under pillars or trees, in order to drill holes in a frozen reservoir.

Due to the standard connection (2 cm), it is possible to select a variety of augers for the technique. The largest diameter of the holes is limited to 30 cm. The product from the manufacturer from China is equipped with a 2-stroke 3 hp engine. with., which will be enough for household needs. The design is based on a robust steel frame.

Experts note the ease of use and reliability. In accordance with the opinion of buyers, a gas drill is perfect for solving local problems at a summer cottage. Only functional equipment will leave much to be desired.

Pros:

  • versatility;
  • simple application;
  • reliable frame;
  • adequate cost.

Minuses:

  • insufficient functionality.

The question often arises of what good motor-drill to buy for home and work. For this purpose, this list was compiled. The list includes the best models from well-known manufacturers. Products are characterized by reliability and quality.

( Total:0 Middle:0/5 )

Add a comment

Go up to the top of the site

Ratings

Reviews

How to choose