Best siding in 2020 for home cladding

Erection of the house box, roof and foundation pouring is only the third part of the whole work. Approximately 30% of the total cost is occupied by internal work, 40% by external finishing. The comfort of living, economy and other characteristics depend on the facade.

Siding is most often used, since the material is considered the most affordable and successful for finishing a new or restoring an old building. It has a small mass, installation is quite quick and it itself can become part of the insulation. In addition, bumps and other imperfections can be hidden during installation. An article and a rating of manufacturers and their products will help you choose the best siding in 2020.

The main types of siding

Determining which siding is better can be very difficult due to its variety in shape, appearance and materials. The main types that are widely used for facade decoration are as follows:

• Chipboard or glued lining. It is produced using wooden elements, namely fibers, which are pressed after preliminary heat treatment with the addition of resins to bind them.
• Vinyl. Siding is presented in the form of thin plastic based on PVC materials, from which a cut is made on a panel strictly according to size. The material is characterized by durability and affordable price.
• Metal. Such facade material is often made of stainless steel, often used for cladding workshops, industrial facilities. The product is not afraid of corrosion, mechanical damage, but in case of incorrect installation, there are risks of collapse from its own weight.
• Cement-bonded siding. It is presented on the market in the form of plates, which are made on the basis of cellulose fibers and cement, the raw materials are pressed, and after production they are not influenced by external factors, fire. It is characterized by flexibility, massiveness. Before finishing buildings, it is important to carry out high-quality preparation of the battens on which the slabs are installed. The product is rarely used due to its high cost.

The main characteristics of the material that you should pay attention to, as well as knowledge of the best manufacturing companies will help you choose the best siding for your home.

Selection rules and determination of the best manufacturer

Due to the high popularity of siding on the market, many large manufacturing firms have appeared, which complicates the choice for the end user, because it becomes more difficult to determine what good siding for the house is. Almost all stands in stores with siding have a beautiful design, the presence of different decor and distinctive parameters, but often there is paint fading, panel deformation and other troubles. For the longest possible service life, not only correct installation should be done, but also the choice of material for quality.

This leads to the fact that you need to carefully approach the choice of the manufacturer itself. You can define a good company and their products by several parameters:

• Start of activities in the field of finishing materials.In the event that a company has been engaged in siding and other facade materials for several decades, many people buy their panels. More often builders know all the pros and cons of a particular company, and can also recommend whose products are better, the buyer can read the reviews about a particular manufacturer himself.
• Availability of quality certificates, tests and other degrees of control.
• Range of products, siding colors and other additions.
• The presence of dealer networks indicates quality, the possibility of quick delivery or return of goods in the event of a defect.

In addition, there are several practical recommendations and selection rules to determine which siding is best for house cladding:

• The number of layers. Depending on the coating of the panels, their resistance to sun fading or precipitation depends. Single-layer products are the cheapest and can only last for a couple of years, after which the paint peels off or burns out. It is best to opt for 3-4 layers.
• Impact resistance. Sensitivity to hail or mechanical damage depends on this value. In the case of a small value of impact resistance, there are risks of deformation, cracks.
• Fire resistance. Some manufacturers make melting siding, which will release toxic gases when exposed to fire. The second manufacturers offer a non-combustible type of NG class and this is the best siding for a wooden house in terms of safety.
• Wind resistant. The indicator is important for residents in areas where there are frequent and strong winds. Measurements are made in km / h within 180-290 units.
• Place of application. In this case, there are environmentally friendly products for interior decoration on sale, as well as exterior views, from which immediately after installation there may be a slight chemical smell.
• Texture. All panels are different, they can imitate wood, stone or other materials, so the choice here depends on the overall design of the house and the client's preferences.
• Equipment. Before buying, it is important to calculate the area of ​​the facade, as well as the number of corners, frames and other parameters. This will allow you to sheathe even the most complex structures. The kit may include J-profiles and other connectors that may be needed during the installation of the panels.
• Certificates. It is imperative that before paying for the selected siding, you need to request certificates for the product in order to verify the quality and the declared parameters.

Having studied all the features, you can proceed to choosing the best siding from different materials.

Vinyl siding rating

When choosing which vinyl siding is better, it is worth noting that it is also called PVC, since it is 80% plastic. It is popular among consumers due to its light weight and almost any design, the average cost starts from 220 rubles per panel. Also, this product can be acrylic, which is similar to PVC, but has a brighter color and is not sensitive to the sun. This type is recommended for any region, especially with hot climates.

Grand Line Tundra Natural-Timber S7 Maple

This is the best vinyl siding for cladding a summer house, country house made of bricks or blocks. The panels have an excellent wood grain pattern with a maple structure. The material is light brown in color, so even close up the facade looks like a wooden finish. The manufacturer has made the material reliable and insensitive to weather, characterized by a long service life, PVC itself is not subject to decay and does not absorb water.

pros:

• Light weight, which is 1.3 kg for 1 long panel.
• Ecobrus, which does not emit toxic substances.
• The presence of a latch lock for secure and easy fixing of panels.
• Beautiful maple look design.
• The relief gives the impression of increasing the thickness of the walls.
• The coating is moisture resistant.
• Sold in panels 300x22 cm, which is convenient for quick finishing of buildings.
• The optimal coating thickness is only 1.025 mm, so the procedure is very simple when cutting is necessary.
• Retains color for many years.
• The facade is washable.
• No gaps appear during installation.

Minuses:

• Moderately flammable product category.
• In the event of a fire, a lot of smoke is generated.

Grand Line Amerika

Visually simple, but very high quality PVC panel. Outwardly it resembles a beige bar, has longitudinal fasteners. Installation is very simple due to the low thickness of the siding and its smooth surface. Recommended for cladding small buildings in the form of a barn, garage, etc. The manufacturer is foreign, its product is not influenced by ultraviolet radiation.

pros:

1. Quality goods for timber.
2. Panel length 3 m.
3. Quite low price.
4. The presence of longitudinal fasteners.

There are no particular drawbacks for such a small cost, except for a small thickness, but it also simplifies cutting.

Docke Burg Sandenburg

A trendy and austere type of vinyl siding that will perfectly complement your cottage or private home. It is very similar to natural large block masonry combined with classic brick. The design of the building results in a very modern and trendy building. All masonry lines are perfectly flat, the surface is embossed, so the walls are monolithic and strict. The material is made in a size of 107.2x47.2 cm and this makes it possible to buy the required number of siding with a careful calculation of the area.

Pros:

• The optimal weight of the siding, one panel is 2.14 kg, so there is no heavy load on the foundation and facade.
• A high degree of naturalness, which is achieved through the fusion of 2 shades.
• A high level of moisture resistance, therefore there is a protection of the walls and the building itself from moisture, sediment.
• Small panel sizes that are great for transportation.
• Very quick installation using a patented system, while the fixation is very rigid and tight.
• Long service life of about 50 years.
• During production, the finishing decor is made by hand.
• Resistant to sunlight thanks to 3-level painting.

Minuses:

• For some consumers, the cost seems high, about 500 rubles per panel.
• The asymmetry of the shapes, due to which you have to do a lot of trimming at the corners.
• It burns very quickly, it is included in the 4th class of flammability.
• Creates a lot of smoke in case of fire.

Tecos ardennes

It is the best acrylic siding and is recommended for small buildings. This is due to the non-standard shape of the double bar, which follows the shape of the trim with a thin horizontal picket fence. The color is dark, but very saturated, and as a result of the tight fit of the panels to each other, cracks and dust and dirt settling on them are excluded. The acrylic type does not rot, does not absorb moisture, due to which it is easy to endure any precipitation and other weather conditions.

Pros:

• After installation, no additional work is needed, all that remains is to wash the facade with water.
• Biologically pure material.
• Condensation does not collect under the siding, as an air cushion is created, and there is also a separate "breathing" part.
• Excellent resistance to mechanical damage, in case of crushing, no dents remain due to the high degree of elasticity.
• Easy installation.
• Suitable for a wide temperature range up to 50 degrees.
• Wiring can be done under the siding as the material does not conduct electricity.
• It is not affected by chemicals, which may include solvents.
• Low weight of 1.83 kg.
• Stylish and rich in appearance.
• Good thickness to work with is 1.2mm.
• It is made in the size of 366x23 cm.
• Painting is done on both sides.

Minuses:

• High cost per panel.
• In case of fire, a lot of smoke is emitted.

Dolomite Rocky Reef Lux Coral

Coral siding covering with very beautiful appearance after complete facade finishing. In general, the panels are made to look like a stone with a relief surface. Fasteners of a universal type make it possible to install siding in a vertical or horizontal plane.

Pros:

• Porous texture.
• Nice appearance.
• Excellent thickness, which increases the sound insulation in the room and keeps the heat inside.
• The optimal cost is around 350 rubles.
• Fasteners allow panels to be installed in different planes.

Minuses:

• The small span between the panels is 2.02 meters.
• Due to the porous surface, there is a strong accumulation of dust and dirt.

Dolomite Rockvin

Stone siding will perfectly complement the general appearance of the building. The dimensions, which are 300x40 cm, deserve special attention. The plastic itself is of high density, so its service life will be long, while the whole structure turns out to be strong and reliable. Thanks to the simple fasteners, installation work can be done independently, the panels are small in weight and one person can cope with the task.

pros:

• Affordable cost around 320 rubles.
• The length of the plank is 3 meters.
• Good plastic thickness of 1.4mm.
• Beautiful stone design.
• Horizontal siding fixation.
• A wide range of colors, from the darkest to the lightest tones.

Among the disadvantages, one can single out the porosity of the surface, on which a lot of dirt and dust settles.

Best metal siding

Aluminum and steel products fall into this category. In the first case, the material is perfect for finishing fronts and cornices or the inside of the roof overhang. Siding is placed in strips, it can be solid or perforated. When choosing, it is important to consider the width of the product. Steel models are used more often for industrial or warehouse facilities, they are simple in shape and have a low price. With their help, it is possible to protect the structure from precipitation and other external factors, but they are afraid of blows, since there are risks of dents.

Aquasystem Pe Ral 8017

The best option among aluminum models with full perforation, which helps to reliably protect the building from moisture. It is recommended to use it for finishing cornices or gables precisely because of the structure, which can provide good ventilation and will remove moisture. Due to such siding, it turns out that it is beautiful to align the contours of the roofs. One panel has 3 strips, which allows covering large areas in a short time. The grooves protrude strongly, so the fixation of the material is very high-quality and reliable, it will not be ripped off even by the strongest wind.

Pros:

• Application of powder coating, which gives a high-quality color.
• Multifaceted shape achieved by a triple break.
• Full perforation to remove moisture.
• The dimensions of the panels allow covering 0.73 sq.m. at a time, and the dimensions themselves are 240x30.3 cm.
• Siding does not burn, does not fade in the sun.
• In case of strong heat from the fire, no smoke or harmful substances are emitted.

Minuses:

• The high cost of goods, which starts at 780 rubles per panel.
• Heavy weight, about 6 kg.
• Installation is only possible in a horizontal plane.

Grand line optima

The best steel option that is suitable for a garage, barn, or household buildings. The cost is about 360 rubles per 1 sq. M. The design is classic, after installation it is similar to ship boards with a wide ledge, which adds massiveness. Powder paint, reliably protects against rust. Due to the protrusions, an air cushion appears and you can still insulate the building.

Pros:

• Nice appearance that can visually enlarge the building.
• Smooth surface that is easy to clean.
• A snap lock allows you to securely install the siding.
• Suitable for any region due to its wide temperature range.
• Easy to cut without compromising seams or appearance.
• Plank height 12 mm.
• There are different lengths on sale from 50 to 600 cm, so it will be very easy to choose siding for a specific building.
• In the event of a fire, the product does not melt or burn.

Minuses:

• Quite a large mass of the panel is 4.8 kg, which affects the foundation and requires careful preparation of the lathing.
• Painting is carried out only on one side, therefore, if condensate is collected, there are risks of corrosion.
• Dirt and dust accumulate on the ledges.

Best Fiber Cement Siding

The product is made from water, sand, cement and cellulose fibers.Observing the dosage, it is possible to make fiber cement. Its strength is obtained like concrete, and its appearance is very beautiful, it can repeat wood and other natural materials. The cellulose fibers act as a bonding element, so the panels are very strong. This type of siding is not afraid of sun, water and fire.

Cedral Wood C50

This siding is the best of all fiber cement, because it has a rich black color, which is similar to some natural minerals. When using bright edging inserts, it is possible to make a non-standard facade that will stand out from the general view. Often used for shopping centers, hotels or offices. There is a relief on the surface that imitates a tree.

Pros:

• Under the influence of sunlight, you can notice a slight transfusion of shade, which makes the facade expensive.
• The product is installed with a Christmas tree, due to which the entire wall is thicker, therefore it retains heat better and acquires additional sound insulation.
• It is possible to use with a large temperature fluctuation ranging from -50 to +60 degrees. The product is suitable for any climate and region.
• The boards do not absorb moisture and are not subject to heavy precipitation.
• The siding has a flammability class G1, due to which it can be considered the best in terms of safety of all possible options.
• It is sold in strips 360x19 cm, due to which you can quickly arrange the facade.
• The thickness of the material is 1 cm, which makes it possible to increase the resistance to mechanical damage and wind-blowing.
• Does not emit harmful substances when heated under the sun.
• The presence of a protective layer on the other side of the material.
• The manufacturer guarantees color retention for 10 years.

Minuses:

• Large slab weight.
• Siding color on 1 side only.

Considering all possible options, you can determine the best siding for cladding a house, which will turn out to be optimal in terms of price, service life and other characteristics.