For a long time, Hitachi has been producing power tools to the highest level of quality. The history of the brand begins over 100 years ago. It is not surprising that both professional builders and ordinary people who are faced with home repair work strive to acquire the best Hitachi screwdriver. The range of brand products meets all modern standards applicable in various service areas.
We decided to make it easier for the readers of the article to choose a screwdriver from the line of the Japanese brand. We analyzed the information on the Web, and also compiled a small but very useful rating. It includes those devices that can be useful for repairs, if necessary, block the roof. Also, such tools will become indispensable for service station employees, if necessary, do minor chores around the house. When choosing, you need to rely on the characteristics of the tools.
Content
Best Buy Hitachi Corded Screwdrivers
The tool may seem simple at first glance, but its power indicators are at the highest level. This is a useful screwdriver for installation work, which is also suitable for disassembly. The length of the wire limits the range of impact of the tool, and therefore it is often customary to use it if it is necessary to carry out repairs in a house or apartment, in a workshop.
Hitachi W6VA4
A good Hitachi screwdriver is presented to your attention, which is used for repair work inside the house, premises. The model is equipped with the most necessary parameters, which are enough to carry out high-quality work with different types of materials, even if their density will be different.
The chuck is equipped with an aluminum screwing depth stop. For this reason, the tool is convenient to work with, even if this is the first time you encountered this task. It should be noted that this device will not damage even the most fragile surfaces, both wood and drywall. There is also a clip in the package. It is located in the upper section of the case. Due to this, the master will quickly free his hands and pick up the device on his belt.
Customers also like the presence of the start key lock. It turns out that during work you do not have to hold it tightly with your finger. Built in tool and powerful motor. It operates at 620 watts and is designed to handle long screws.
The main advantages
- the gear case is made of metal;
- the inserts on the back of the handle are equipped with rubber inserts. They are also located along the block where the motor is located;
- the start button is made of rubber;
- the depth is limited by a special option;
- the user can control the rotation speed;
- weight 1.4 kg;
- a magnetic holder is included in the package.
The main cons
- the price is around 5200 rubles;
- only 1 speed is presented;
- no backlight;
- ventilation is located under the gearbox;
- rubber pads on the front of the handle;
- the reverse lever is difficult to switch with gloves.
Hitachi cordless screwdrivers
The tool will not be supplemented with wires, and therefore work can be done even on a hill, in the open air. It is also convenient that with this screwdriver you can change the place of action. When choosing a device, it is important to take into account the parameters of the battery and the force with which it twists.
Hitachi DS12DVF3
An excellent model for work, both outdoors and indoors. Especially appreciated when the visibility of the work area is poorly lit. In the presence of an excellent flashlight with a rechargeable battery. All this allows you not to use an extension cord and a lamp or an additional flashlight. It is very convenient to work with such a device.
A 1.5 Ah battery is available. As a result, you can work with such a device throughout the day. Due to the manufacturer's decision to make the shape of the T-shaped, it is possible to ensure the perfect balance and retention of the screwdriver. The ventilation area is located on the back cover area, and therefore hot air goes outside.
It is also convenient that there is a keyless chuck. Bits of different diameters can be inserted into it. Drills are no exception. The manufacturer guarantees the quality of its product, and therefore it is not surprising that the warranty period is 3 years.
Customers also appreciated the presence of a safety strap. During operation, the tool will not fall to the floor or be damaged by it. In the area of the handle there is a wide strip with a rubber surface.
The main advantages
- 4 slots for installing spare bits;
- lock protection in order to block the unfastening of the battery;
- reverse and speed mode switch;
- twisting 26 Nm in force;
- you can work with wood and metal, creating holes with a diameter of 25 and 12 mm, respectively;
- equipped with overload protection;
- available power button lock;
- there is a braking of the engine rotation due to the release of the key;
- there is the possibility of fast charging.
The main cons
- the cost is 5 thousand rubles;
- weight 1.8 kg;
- gains 1050 rpm at idle;
- the battery runs out quickly if the tool is idle.
HITACHI DS14DCL-RA
This is a great option for professional use. This is due to the fact that it has an excellent balance of the body, as well as a weight of 1400 grams. It is important to note that with the help of the reverse, you can dismantle, remove the wrong mountings. The torque will be 31 Nm, which can be controlled by 21 clutch positions.
This tool differs from other Hitachi offers in that the engine compartment is equipped with a rubber coating. As a result, even if the tool falls, it will not be accompanied by damage.
The set includes a case in which you can put other items as well. In the presence of a lantern, where there is an option to adjust the angle and a stable platform.
The main advantages
- there is a second battery;
- 7 bits that can be matched to different types of screws for work;
- the body is protected by rubber;
- 2 speeds that are adjustable;
- the cartridge can be spread with 1 hand;
- drill clamp from 1.0 to 13 mm;
- 4 slots are provided for installing bits;
- adjustment of the tightening force varies in accordance with 22 degrees;
- you can drill holes in the wood surface area. Its diameter will be 30 mm;
- the start button is locked;
- battery type does not save memory;
- weight 1.5 kg;
- fast charging capability.
The main cons
- the price is around 7 thousand rubles;
- there is no strike option;
- gains 1250 rpm in 60 seconds.
Hitachi DS18DVF3
A tool is suitable for screwing in long self-tapping screws. Their length can be up to 120 mm. At the same time, an 18 V battery is also provided, which makes it possible to provide a torque force of 45 Nm.
So that the tool does not fall out of hands when the master is on the roof, there is a safety leash. It should be worn on the wrist area. The hold in the hands is tenacious. It is due to the presence of a rubber pad, which has a wide surface. It is located in the area of the front of the handle. The device weighs 2 kg. This is enough to push the screw from above. The manufacturer is confident in the quality of the product, and therefore a 3-year warranty on the tool is covered.
The complete set is complemented by a case, a second battery and a flashlight. There is also a set of bits that can be used immediately after purchasing the instrument.
The main advantages
- for optimal balance, the manufacturer has equipped the tool with a T-shape;
- there are reverse and start buttons, which are located separately from each other. Due to this, the master may not worry that he accidentally presses the wrong key;
- the cartridge is manually diluted, no wrench is required. It also allows you to install drills;
- ventilation is thought out, equipped with dust protection;
- the speed switch is located in the area of the upper part of the body, each of them is adjustable;
- 4 sockets for planting, so as not to carry bits in your pocket;
- the speed can be adjusted in accordance with 22 steps;
- tightening force 45 Nm;
- wood can be drilled up to 38 mm in diameter;
- the battery has a power of 18 V;
- a clip is used for hanging the belt.
The main cons
- high price - 8 thousand rubles on average;
- 2 kg weight;
- the battery has a volume of 1.4 A / h;
- revolutions reach only 1200, which is not enough for drilling dense materials, and therefore it will take a long time to work;
- depth gauge does not come with the device.
