Best PVC boats in 2020

Any fisherman has a period when it is necessary to buy a boat, which will improve the quality of fishing right in the middle of the pond and in other places. PVC models are very popular, because they are much stronger than rubber ones, and have other advantages. The main thing is to choose a quality product that will last for many years. The article presents the best PVC boats in 2020, making the choice easier.

Selection rules

When deciding which PVC boat is better, you should initially understand the main criteria for choosing:

• Dimensions of the structure. This characteristic should be determined based on the number of people on board. For one person, the optimal dimensions will be models up to 3 meters, for 2 people from 3 meters. In addition, you need to remember about things that also need a place on board. The standard and acceptable option is 3.2 m.
• Bottom type. If fishing is not just a hobby, then it is better to give preference to a hard floor. This allows you to catch prey while standing, to put heavy things, in addition, driving properties and comfort are increased. On sale there are options with slatted flooring, inflatable bottom or floor. The last type is the most popular and reliable, giving the optimum degree of rigidity.
• Transom. A necessary element for people who plan to install the engine for movement. It is best that this addition be glued in with a size of 2.5 cm and the presence of plastic overlays. Even if the motor is not installed, the transom will become a useful device for additional accessories.
• The density of the material. The denser the fabric, the better, as it will allow it to pass through reeds, rocks and driftwood, but in reality, the fabric can tear when running into sharp parts, regardless of the density of the material. In addition, dense raw materials will be heavier.
• Motor power. All the best PVC motor boats have certain limitations on the power of the motors. The most common models are up to 4-5 hp. and that's enough for hunting or fishing. 10 hp machines suitable for traveling long distances, which will be over 10 km.

Knowing the basic selection criteria, it is much easier to determine which PVC boat is better to buy for certain purposes.

Rating of the best rowing models

When choosing, the main characteristic is the size, the indicator of the carrying capacity, as well as the spaciousness, the presence of oars and holders for the fishing rod. Often, models from this segment will be small, structurally simple and with an optimal cost, which are suitable as a boat for a weekend.

HDX HELIUM-370 AM

Roomy model for 5 people. The boat can lift up to 689 kg in weight and is great for sports sailing in mountainous areas or fishing in shallow water. It is characterized by an inflatable bottom, which houses many compartments. This solution achieves an optimal stiffness that will outperform many solid-field options.

In addition, the design includes a bow and parking awning. To increase the comfort of movement inside the vessel, there are handles and a cable along the side.The developers have equipped the product with a drain valve, as well as the ability to bleed air.

pros:

• High quality and durable material.
• Excellent completeness.
• Lift capacity up to 689 kg.
• Maneuverability.

Minuses:

• The full equipment is 65 kg.
• A weak bag is provided for transportation.

Intex Explorer-300 Set

This is the most successful model among inexpensive boats, which is characterized by a simple design, light weight and dimensions. This model is positioned by the manufacturer as a model for 3 people, but in practice its dimensions allow only one fisherman with the necessary equipment to be comfortably accommodated. A special feature is the inflatable bottom. The device itself is equipped with oars, oarlocks, pumping equipment. It is recommended to buy for fishing in quiet lakes, reservoirs for one person, maximum 2 people.

Pros:

• The price of the boat is only 1,700 rubles.
• Small dimensions when folded.
• Low weight with optimal lifting capacity.

Minuses:

• There is not much room inside for 3 people, so it will be cramped.
• Unreinforced PVC fabric.

Pilot C-200

A maneuverable model for 1 person, characterized by simplicity and the presence of a solid seat. The manufacturer made 2 independent cylinders with excellent sealing, which increases the degree of reliability, but the diameter of the pressurized compartments itself is small, amounting to 27 cm. In the kit, the buyer receives oars, a line, a choice of paddles or oarlocks. The average cost of a product is around 6,600 rubles. Due to its small size and weight, such a model attracts fishermen and hunters who shoot ducks.

pros:

• Small size.
• Minimum weight.
• Excellent maneuverability.
• Good stability at medium waves.

The disadvantages include the lack of a plug-in bottom.

Frigate M-2

The PVC boat is designed for 2 seats and is considered a popular model among fishermen. It is characterized by excellent reliability, reasonable cost and water resistance. The craft itself is included in the budget, produced in the Russian Federation. To increase comfort, there are hard seats that can be easily removed, a protective cable.

The oars are modular, the set includes a pump, oarlock and other described elements. When used, a person gets an optimal degree of safety, which is achieved by a pair of inflatable balloons. The model is suitable for quiet fishing, but it is better to use a car for transportation.

Pros:

• Keeps well on waves.
• Flexible design.
• Both cylinders are independent of each other.
• The cost is only 3500 rubles.

Minuses:

• Lack of an inflatable day.
• The carrying bag is inconvenient to use.

Intex Mariner 3

A beautifully designed model that boasts high strength and water resistance. This boat has inflatable seating and a keel. There is enough space inside to comfortably accommodate 2 adults with the necessary things for fishing. In the complete set, the buyer receives a cable for protection, oars, oarlocks, a device for inflation of cylinders, fasteners for fishing rods. The floorboard is collapsible, which increases the stability of the boat while moving on board. The cost of the goods is about 14,000 rubles. It is recommended to buy for calm fishing on lakes or for general recreation.

Pros:

• High degree of strength.
• Optimum lifting capacity.
• The flooring is comfortable and comfortable during use.

Minuses:

• Large mass of goods.
• Mediocre collet quality.

TOP rating of the best PVC motor boats

These models are characterized by a reinforced bottom structure, which is of several types. Inflatable, often used when the need for quiet movement on the water and provides excellent shock absorption. The rigid structure will allow you to swim over any body of water without fear of stability.

Solar 350

This is the best PVC boat for an outboard motor. The body is made in a classic shape, it is characterized by the presence of 4 cylinders, which are independent of each other.To increase comfort, the manufacturer installed a fluid drain valve from the side, and there is also a stationary transom. The boat is made of high quality PVC fabric with additional reinforcement for increased durability. All this together will allow to install units up to 15 hp.

The bottom is inflatable and made so as to pass any bottom, regardless of its relief. The bow is slightly raised, there are bevels at the stern, which is great for planing. The product is completed with oars with swivel oarlocks, there are solid seats, a cable, a pump and a repair kit. The cost of the goods is quite high - 50,000 rubles. It is recommended to buy this product for experienced fishermen and hunters who go hunting in shallow lakes and rivers.

Pros:

• High quality materials from which the boat is made.
• Excellent design maneuverability.
• The product can be assembled and disassembled very quickly.
• Good cross-country ability in shallow waters.

Minuses:

• Weak pump that is offered in the kit.
• High price.

Admiral 335

This is a high-speed boat with excellent running characteristics. It has a flat bottom, the keel is inflated, and to increase the safety of the fishermen, there is a line and special bumpers that protect against splashes. It is characterized by a 4-section floor liner, which gives optimum structural rigidity and good resistance to waves. The transom will make it possible to install power units up to 18 hp. The average price for a boat is 28,000 rubles.

Pros:

• Good maneuverability.
• An excellent choice for high-speed movement on water.
• Optimum lifting capacity.
• The ability to quickly start planing.
• Not afraid of big waves.
• Excellent equipment and protection on board.
• Large diameter cylinders.

The main drawback is the complexity of installing the floorboard.

BoatMaster 310

This model is characterized by very small turning angles. A flat-bottomed boat, distinguished by its design. By using the fin keel, the manufacturer was able to reduce the weight of the boat and affect the turning radius when sailing at high speed. The transom makes it possible to install power units up to 6 hp.

The cylinders are divided into 3 inflatable elements, and to increase the rigidity, the company made a plug-in bottom-book. The product is completed with oars, a couple of cans, a pump and a repair kit. The cost of such a product will be about 21,000 rubles. Despite the small flaws, the boat is suitable for sailing the seas, but maneuverability can only be assessed in narrow sections of rivers.

pros:

• Small mass.
• Reliable transom fixation with reinforcement.
• Use of the Liktros-Likpaz fastening system.

Minuses:

• Weak bottom elasticity, which is strongly felt when speed increases.
• Poor quality transport bag.

The best PVC motor-rowing boats

Such designs are made for people who not only fish or hunt, but also need to cross long distances. Models are characterized by their small size and relatively low weight.

HUNTERBOAT Hunter 320

A model from a domestic manufacturer, which is considered a universal PVC vessel. This option is not only suitable for hunting or fishing, but will also be an excellent choice for relaxing on the water. You can put an engine on board, and there is also room for oars. During production, high-quality PVC material with a density of 750 g / m2 is used, which gives excellent protection against reeds, stones, etc. The package includes a standard set, as well as additional elements, including an anchor, a repair kit. The device can take on board up to 330 kg.

pros:

• Excellent value for money.
• Optimum capacity.
• Good lifting capacity.
• Engine for installations up to 6 HP
• High density PVC.

Minuses:

• The complete pump is very weak.
• Complex floor installation.
• Medium quality seams.

Aqua 3200 SC

This model is considered the lightest for this class, it is presented in the shape of the letter U, inflatable cylinders for 3 compartments.The nose piece is slightly tilted up, which gives an accelerated approach to planing, even with the engine of minimum power. The bottom is flat, inflatable. Its rigidity is achieved by a plug-in bottom hole, which is fixed inside by means of aluminum rails.

In the set, the manufacturer offers hard seating, railings, oars, and oarlocks. The transom allows you to install powerful engines up to 15 hp. The average cost of a product on the market will be 22,000 rubles. Recommended to buy for river fishing or general lake recreation.

Pros:

• Light weight.
• There is a fender.
• The seat is of a sliding type and is quite rigid.
• The use of reinforced PVC with a high density, which makes the model not sensitive to reeds, snags.
• Slate laying is characterized by a high level of reliability and convenience.

The disadvantages include the lack of a valve for water discharge.

STREAM Dolphin-M

An inflatable boat with a well-thought-out design and high-quality raw materials for manufacturing. PVC with a density of 950 g / m2, so breakdowns are minimized during fishing. As an additional safety, the cylinders are divided into 2 completely sealed compartments, so even if one of them is punctured, the boat remains on the water. The shape is rounded, the nose part is slightly raised, which in total gives excellent driving properties. The device is suitable for a motor (if you install an outboard trance) and oars.

pros:

• High fabric strength.
• Well-made seams.
• Stability on water.
• Excellent handling.
• The payol can be disassembled.

Minuses:

• There is not much room on board even for 2 people.
• No keel.

Grouper 360

A simple but very reliable boat model, which is characterized by low weight and very high lifting capacity. The product is easy to assemble or disassemble. A feature can be considered the presence of a keel bottom, which is inflated and characterized by low pressure. There is a special reinforcement at the ends of the cylinders. The boat is convenient for mooring to the pier. For more convenient movement, there are handles at the end and bottom of the cylinders. A guardrail is installed at the top, and there is also a separate handle for the skipper.

The transom is permanently installed, which makes it possible to install engines up to 20 hp. Equipped with oarlocks, oars, pumping device, and repair kit. For this product, you will need to pay about 45,000 rubles. It is recommended to buy such a product not only for fishermen, but also for hunters and water lovers.

Pros:

• The design is carefully thought out and is characterized by excellent reliability.
• The lifting capacity is very high with a low weight.
• Excellent maneuverability.
• Rich equipment.

Minuses:

• There is no valve for draining water on board.
• The complete pump is rather weak.

Navigator 290

A domestic model, which was made specifically for hunters and fishermen who are engaged in similar activities on closed rivers. The design is unusual, since the cylinders are characterized by different diameters, which become larger towards the stern and this helps to speed up the transition to planing.

The boat is made of dense, reinforced PVC, which, together with excellent assembly, gives a high level of safety for the owners. The total length is 2.9 meters, with a width of 1.55 m, so 2 people can comfortably fit inside. The bottom is rigid, therefore the weight of the equipment is 26 kg.

pros:

• Optimum storage capacity with short length.
• High quality PVC fabric with the desired density.
• Easy and quick assembly or disassembly.
• Excellent gluing of seams, which are still reinforced.

The main drawback in the indicator of carrying capacity, which turned out to be 220 kg.

Pilot M-330 Pilot

This product is of domestic production and differs from its counterparts in the installed protection beam, which is located on the keel and at the bottom of the cylinders. In addition, the company made a reinforced cockpit with dense PVC fabric, which avoided rapid abrasion of the material on the stringer.

The flooring is collapsible and inserted into the structure, which increases the level of rigidity. The very design of the place for the motor will allow you to install units up to 15 hp.It is recommended to buy a model for fishermen who prefer spinning. The cost of the goods will be about 28,000 rubles, but the period of operation is very long, significantly different from analogues.

Pros:

• Excellent reliability.
• All major areas that can be damaged have additional protection.
• The cockpit is large in breadth.
• Good water resistance.
• Well-made seams.

The main disadvantage is the need to install transom wheels, which will make launching easier.

Studying the presented rating and knowing the selection parameters, any person can determine for himself what a good PVC boat is for fishing, hunting and other needs, based on its main parameters.

v