A good stabilizer for a gas boiler in 2020

Any equipment needs care and supervision, and sometimes additional devices, allowing to achieve long-term operation and safety is not cheap pleasure. It is for this purpose that manufacturers of heating boilers of any kind produce voltage stabilizers. The search for a suitable device for a gas boiler becomes the subject of consumer thought and concern.

The Top 10 best in 2020 will help you navigate the huge range of offers and choose a really good one. The 2019 rating is compiled according to several criteria at once, and will definitely help you choose a good stabilizer for a gas boiler.

Selection criteria

It is difficult to choose the best voltage regulator for gas boilers among a wide range, because each consumer has his own requirements for him - for someone the power of the pump and the control unit matters, sometimes the error value, product size, cost are important. In different cases, a good voltage regulator for a gas boiler becomes the best for the owner of a private house or a country house, because it fully meets the specified requirements. Although, according to someone's increased requirements, it may not be included in the IRP rating, and is not included in the generally accepted indicators.

The best stabilizers for gas boilers are devices that perform their direct functions with maximum efficiency:

  • react to voltage drops when entering the network;
  • correcting and directing energy in a sufficiently close value to normal indicators;
  • give protection by breaking the electrical circuit if the input level is greatly exceeded;
  • restart the device immediately after level normalization;
  • keep a pause for safety, and in case of a normal level, they begin to supply the connected equipment.

Of all the proposed types of devices (relay, electronic), a device is selected that can cope with the maximum and minimum voltage, with an optimal current-voltage characteristic. The device itself must be equipped with reliable protection (otherwise it will burn out during abnormal feeds) and respond quickly to a trouble that has occurred. On it, according to modern requirements, there should be some kind of visual information to track the voltage in the network. Modern models are equipped with a digital induction system.

TOP 10 best voltage stabilizers for gas boilers

This trade line is characterized by the predominance of products from domestic manufacturers. They are more stable, more reliable and cheaper than any samples from foreign ones, and this is understandable: after all, they are designed for the peculiarities of local power transmission systems, and are developed taking into account these differences. The security system from Russian manufacturers was developed by people who fully understand what voltage drops in the network are, and what consequences they can lead to, if they do not insure themselves in time and reliably.

10 Rucelf BOILER-600

A good stabilizer for a gas boiler in 2020

A reliable and modern device designed specifically for areas with unstable voltage readings or possible sudden changes.A characteristic feature is the possibility of using it in country houses, rural houses, in areas remote from large cities and power plants. If you live or rest in places with an unstable supply, this particular design will be the best option. It can work not only with gas boilers, but also with any household appliances with circular pumps, while it has an extremely wide input range.

Pros:

  • inexpensive but high-quality model from a domestic manufacturer;
  • guaranteed reliability when working with unstable voltage, and precisely in combination with a gas boiler;
  • hassle-free installation and connection, simple and tested design;
  • guaranteed long-term operation;
  • practically silent work, which does not create inconvenience to the inhabitants of the house.

Minuses:

  • when conducting a survey of consumers - not noted.

Convenient and reliable industrial variation without any bells and whistles, but perfectly fulfilling its intended purpose from a Russian manufacturer with a deservedly high reputation.

9 RUCELF BOILER-1200

A good stabilizer for a gas boiler in 2020

A relatively new modification of a single-phase stabilizer from a Russian manufacturer in a new design to save space. The ability to be positioned against the wall does not interfere with the performance of all provided functions - from setting up a stable power supply to eliminating frequent impulse noise and significant voltage drops. A very wide input range, backed up by a motor resource at an analog-free level. The ruggedized enclosure saves space due to the specific placement provided.

Pros:

  • guaranteed duration of operation;
  • a well-known manufacturer, Russian and reliable;
  • industrial design - ergonomic and aesthetic;
  • designed to provide boiler equipment;
  • democratic cost.

Minuses:

  • surveyed consumers did not find any flaws in the stabilizer.

Reliable, sturdy, ergonomic and aesthetic device from a famous Russian brand.

8 Calm R 800T

A good stabilizer for a gas boiler in 2020
An excellent representative of the commercial line of single-phase stabilizers, equipped with an indication, an electronic protection system with a special algorithm for various functions (under normal, normal power supply mode and loads in extreme conditions.
Pros:

  • functional and aesthetic development of industrial designers with informative indication;
  • high-quality finish of the case and electronic protection system;
  • the ability to work in normal and extreme mode;
  • guaranteed degree of reliability, unpretentiousness and durability.

Minuses:

  • lack of display for data visualization.

A good and reliable device that is in high demand. Sometimes, because of this, there is an unreasonably high price in retail chains.

7 Calm R 600T

A good stabilizer for a gas boiler in 2020

Another example of high quality products. Recommended for installation in rural areas, with extremely low error and wide input voltage range.

Pros:

  • practically absent errors;
  • stable and reliable operation;
  • small-sized device for wall mounting.

Minuses:

  • not marked.

It switches off automatically at maximum loads and switches on when the extreme peak decreases. Ideal in areas with constant power interruptions.

6 Energy ARS-1500 E0101-0109

A good stabilizer for a gas boiler in 2020

The manufacturer's recommendation indicates a very high efficiency (98%). Can be used not only on gas equipment, but also on solid and liquid. It fires in 10 milliseconds - one of the best indicators.

Pros:

  • excellent performance in terms of catching accuracy and shutdown speed;
  • recommended for heating boilers using any type of fuel;
  • wall mounting does not take up space;
  • optimal response time.

Minuses:

  • due to its weight, it is not attached to drywall walls.

A universal device with unique functional characteristics.

5 Bastion Teplocom ST-555

A good stabilizer for a gas boiler in 2020
A compact device with a remote outlet, lightning and moisture protection - ideal for placement in a problem basement, used to protect individual units or the unit as a whole.

Pros:

  • no problems in installation and connection;
  • bright backlight for checking readings without additional light sources
  • maximum functionality.

Minuses:

  • clicks and is quite loud when running.

Numerous advantages allow the inexpensive unit to be used in the basement, away from sleeping quarters

4 Energy VOLTRON - 1 000 5% Е0101-0154

A good stabilizer for a gas boiler in 2020

Wall stabilizer recommended for smart homes, offices, healthcare facilities and laboratories. Minimum reaction time and outdoor installation, unobstructed for all weather conditions

Pros:

  • compact. with display, aesthetic in visualization;
  • accurate and powerful, with minimal error;
  • optimal output and minimum response

Minuses:

  • there is no second outlet.

A versatile option for home and industrial use from a good manufacturer, with an aesthetic design.

3DAEWOO DW-TM1kVA

A good stabilizer for a gas boiler in 2020

Low-noise, microprocessor-based, with extremely short response time and stable output indicators. They will even allow you to connect two consumers, guaranteed quality is provided by an electronic microprocessor unit.

Pros:

  • branded manufacturer;
  • functional design and durability;
  • polyfunctionality of an industrial device.

Minuses:

  • uninformative instructions for use.

A product for those who prefer branded items with a high degree of reliability and prestige.

2 LENZ TECHNIC R500W

A good stabilizer for a gas boiler in 2020

Relay stabilizer of universal purpose both for a private house and for an office building is equally suitable. There are own devices to prevent overheating and overloading, the error is minimal.

Pros:

  • you can connect two consumers at once;
  • informative large screen;
  • compact device with 100% power and wide range leveling ability.

Minuses:

  • not marked, except that the response is slightly lower than that of other models.

An excellent example of an automatic stabilizer with a minimum total power and maximum ratio.

1 POWERMAN AVS 500 S

A good stabilizer for a gas boiler in 2020

Compact and inexpensive device with light indicators and built-in filters, with the ability to control the operation on a liquid crystal display.

Pros:

  • excellent functionality with low weight and size;
  • extreme ease of installation and connection;
  • democratic cost.

Minuses:

  • not marked.

An inexpensive, easy-to-use and practical, noiseless stabilizer that does its job well.

The trade line is represented by imported and Russian products - for any consumer. Russian products in this market segment enjoy well-deserved fame and popularity. It is not surprising that the TOP-10 includes, mainly, the developments of domestic manufacturers.

( Total:0 Middle:0/5 )

Add a comment

Go up to the top of the site

Ratings

Reviews

How to choose